Study on high-strength composite portland cement with a larger amount of industrial wastes

It is one of important measures for the sustainable development of cement industry to utilize industrial wastes. High-strength composite portland cement with a large amount of granulated blast furnace slag (GBFS), fly ash and limestone was prepared by separate grinding method, optimizing gypsum and using activators. The total amounts of blending materials are between 45% and 65% and the strength grades of cements reach 525 or even 625 according to Chinese national standard for composite portland cement. Besides setting time and strength, the hydration heat, drying shrinkage and sulfate resistance were also determined.     

包钢粉煤灰的综合利用

叙述了国内粉煤灰的综合利用途径,介绍了包钢粉煤灰综合利用的现状以及适合包钢实际的利用途径,并提出了相应的综合利用对策.     

QUANTITATIVE ANALYSIS OF FLAVANOIDS IN BARLEY,HOPS AND BEER BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY (HPLC)

This work describes a method for the quantitative analysis of flavanoids of barley, hops and beer by HPLC. This method requires only about 4 h and it gives representative and reproducible results. A few results obtained by this method are given for barley and hops.     

Application of a Compaction Simulator to the Design of a High-Dose Tablet Formulation. Part I

The compaction properties of an investigational drug are studied by the use of a compaction simulator. The effects of punch velocity over the range of 30-640 mm^-1 on the compaction properties of the pure drug and a variety of formulas incorporating a high dose of the active compound have been investigated. The data were analyzed by applying the Heckel equation. The pure drug was found to have a high yield pressure at a relatively low punch velocity of 31 mm^-1. As the punch velocity was increased there was a decrease in crushing strength, primarily as a result of increasing yield pressure. These findings indicate that the pure drug predominantly consolidated by fragmentation and elastic deformation, with a slow plastically deforming component. The information obtained on the consolidation mechanism of the pure drug and, subsequently, on model formulas were instrumental in the design and selection of a robust formula and granulation process. The advantages of conducting dosage form design and characterization studies during the early phase of tablet formulation using means such as a compaction simulator are emphasized in this investigation.     

霍林河一号露天矿煤层灰分变化规律的研究

详细地论述了霍林河一号露天矿各煤层的灰分特征和同一煤层不同地段灰分的变化情况,揭示了各煤层灰分的变化规律,为露天开采提供了可靠的技术保证。     

Age-related response of male melon fliesDacus cucurbitae (Diptera: Tephritidae) to cue-lure

Laboratory-reared and wild adults of the melon fly,Dacus cucurbitae Coquillett, were tested for response to cue-lure at various ages. Virgin laboratory (4, 6, 8, 10, 12, and 14 days old) and wild (10, 12, 14, 16, 18, 20, and 22 days old) flies were released into outdoor field cages and trapped from 0800 until 1600 hr. Response of males to cue-lure increased with age and corresponded with sexual maturity for each strain. Females of both strains were relatively nonresponsive to cue-lure. Failure to eradicate in past male annihilation programs againstD. cucurbitae may be explained in part by the fact that only older males, which may have already mated with gravid females, respond to cue-lure.     

Zeolite synthesis from paper sludge ash with addition of diatomite

BACKGROUND: This study aimed to investigate the synthesis of zeolites from paper sludge ash (PSA) with added diatomite to remove both NH₄⁺ and PO₄^3? for water purification. The PSA had low Si and significant Ca contents. Four types of diatomite: white (T‐W) and brown (T‐B) from deposits of marine origin in Takanosu, and white (S‐W) and gray (S‐G) from lacustrine deposits in Shonai, were added to NaOH solution to increase the Si content and thereby synthesize zeolites with high cation exchange capacity (CEC). RESULTS: The order of the amounts of Si extracted from the diatomite to the alkali solution was S‐W > T‐W = T‐B > S‐G, which correlates with the amorphous SiO₂ content of diatomite. The original ash without addition of diatomite yielded hydroxysodalite with CEC of about 1.0 mmol g^?1. For all samples, the addition of diatomite to the solution yielded zeolite‐P with a higher CEC, but the addition of excess Si inhibited the synthesis of zeolite‐P, and the CEC of the product was low. A product with high CEC including zeolite‐P was obtained in a solution with around 500 mmol L^?1 of Si concentration, and had the ability to remove both NH₄⁺ and PO₄^3?. CONCLUSION: Diatomite has the potential for used as an additive for the synthesis of high CEC zeolite from PSA. The product with zeolite‐P exhibited relatively high CEC, capacity for NH₄⁺ uptake, and the ability to remove PO₄^3? by precipitation, which is preferable for water purification applications. Copyright © 2008 Society of Chemical Industry     

Mechanical properties and thermal stability of rice husk ash filled epoxy foams

Mechanical properties and thermal stability of epoxy foams filled with white and black rice husk ash were studied. Epoxy foams were prepared from a commercial system and filled with different amounts of both the ashes (0, 6.8, 12.8, 18.0, and 22.7 wt %). The incorporation of both the ashes modified the final morphology of the foam, decreasing the average cell size and increasing the number of cells per volume unit. For all filler percentages used, the specific modulus and strength results showed that the white ash is more effective as reinforcing agent than the black ash. The initial degradation temperature was not affected by the content and type of ash used as the filler. The integral procedure decomposition temperature, weight loss, and char residue results were related to the ash type and atmosphere used in the thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Composition and morphology of char particles of fly ashes from industrial burning of high-ash coals with different reactivity

A comparative investigation of the composition and the morphology of char particles was conducted: char particles were recovered from fly ashes of two power stations in Russia from burning of high- and low-reactivity high-ash coals; the known results of studies of char particles generated in laboratory conditions from coals characterized according to the ASTM D388-98a standard were also used. The composition of organic and mineral components of different fraction char particles was studied. An inverse correlation between the content of the organic substance and the iron content in char particles was identified. The morphology of the char particles for the three main types (Cenospheric, Network and Solid) and the influence of coal reactivity and temperature on char morphology were investigated. The morphology of the mineral component of char particles of the two varieties of coals was also studied. It was shown that the high-temperature of industrial burning of Ekibastuz coal results in melting of the mineral substance and forming of micron-scale microspheres located in the lamellar porous structure of the carbon matrix.     

Characterization of sintered coal fly ashes

Çan, Çatala?z?, Seyitömer and Af?in-Elbistan thermal power plant fly ashes were used to investigate the sintering behavior of fly ashes. For this purpose, coal fly ash samples were sintered to form ceramic materials without the addition of any inorganic additives or organic binders. In sample preparation, 1.5 g of fly ash was mixed in a mortar with water. Fly ash samples were uniaxially pressed at 40 MPa to achieve a reasonable strength. The powder compacts were sintered in air. X-ray diffraction analysis revealed that quartz (SiO₂), mullite (Al₆Si₂O₁₃), anorthite (CaAl₂Si₂O₈), gehlenite (Ca₂Al₂SiO₇) and wollastonite (CaSiO₃) phases occurred in the sintered samples. Scanning electron microscopy investigations were conducted on the sintered coal fly ash samples to investigate the microstructural evolution of the samples. Different crystalline structures were observed in the sintered samples. The sintered samples were obtained having high density, low water adsorption and porosity values. Higher Al₂O₃ + SiO₂ contents caused to better properties in the sintered materials.