热塑性硬质聚氨酯泡沫在汽车顶内饰中的应用

概述了汽车顶内饰用热塑性聚氨酯硬质泡沫塑料进展状况，介绍了硬泡及顶内饰成型方法，对影响该硬泡性能的一些因素进行了讨论。指出该顶内饰已批量生产。     

短纤维/橡胶发泡复合材料的微观结构及拉伸破坏机理

对锦纶短纤维增强的NR发泡材料的微观结构及拉伸破坏行为进行了研究，并分析了其破坏机理。采用未处理短纤维增强的NR发泡材料中短纤维成为泡孔的成核点，并大部分悬空在泡孔中，拉伸破坏时泡壁与短纤维结合处容易出现应力集中，成为裂纹的起始点，失效时短纤维大部分被抽出；预处理短纤维能与橡胶基体之间产生良好的粘合，从而处于橡胶基体中。其短纤维增强的NR发泡体拉伸产生的裂纹扩展时遇到纤维，纤维能起到承载应力、使应力转向、阻止裂纹扩展的作用，一定程度上改善了复合材料的拉伸强度等物理性。     

Hydraulic resistance of rigid polyurethane foams. I. Effect of different surfactants on foam structure and properties

Foams used in buoyancy applications must resist penetration by water at significant depths of immersion. The behavior of water blown rigid polyurethane foam at different water pressures from 0 to 3 MPa are studied in this work. The effects of different surfactants on the cell structure and hydraulic resistance of the foams are examined. The foams have densities in the range of 145 to 160 kg/m³. With increasing applied hydraulic pressure, it is found that the foams have very small buoyancy losses at low pressures but beyond a threshold pressure, buoyancy losses increase rapidly. The threshold pressures of the foams increase with decrease in cell window area. A cell window is the lamella of the foam material that separates two adjacent cells. The cell sizes of the foam are found to correlate with the size of the air bubbles entrained during initial mixing. Surfactants, which reduce the surface tension of the polyol to the greatest extent, are found to give the finest initial bubbles, smaller cells, and foams with the highest hydraulic resistance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2821–2829, 2004     

硬质泡沫橡胶浮子的试制

针对泡沫浮子的使用要求，筛选出了用于制备泡沫橡胶浮子的配方体系，通过实验确定出了3种不同发泡剂的泡沫橡胶浮子的配方，比较了垂直自由发泡法、垂直加压发泡法和水平加压发泡法的优缺点。     

烧结工艺对硼泥玻璃陶瓷显微结构和性能的影响

以硼泥为主要原料对制备玻璃陶瓷工艺进行研究,实验中发现烧结温度和烧结时间对析晶相的成分影响较小,但玻璃陶瓷的表面形貌影响较大;当烧结温度高于析晶温度时,对晶体尺寸影响更大;根据不同烧结温度和烧结时间对玻璃陶瓷结构影响,找出适合的最佳烧结温度和烧结时间,其值为781℃,时间为4h。     

膜在钻井液中的应用

膜概念在钻井液中的应用贯穿始终,不管是最初涉及到的泥饼概念,还是无渗透钻井液的新理论,都和膜概念息息相关。本文简述了膜的基本概念、膜的功用和膜概念在钻井液中的应用,说明将胶体化学膜领域理论应用到钻井液领域,不仅扩展了膜的概念,也为钻井液的研究提供一个新的手段。     

复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

Bauxite residue (red mud) increases phosphorus retention in sandy soil catchments in Western Australia

The Peel-Harvey estuary on the Swan Coastal Plain, Western Australia has become eutrophic partly because of the leaching of fertiliser phosphorus from sandy soils. The acid, coarse textured sandy soils are predominantly quartz, have a low iron and aluminium content and do not retain phosphorus. Red mud, derived from bauxite, is a by-product of the alumina industry and has the ability to retain phosphorus. Retention of phosphorus is enhanced when the red mud is neutralised with gypsum. Red mud has been suggested as a soil amendment to reduce phosphorus leaching.To investigate the reduction in the leaching of phosphorus from soils amended with red mud, weirs were constructed at the outlets from a pair of catchments to quantify the amount of phosphorus in the streamflow. Both catchments were deep grey Bassendean sand. One of the catchments was treated with 80 t/ha of red mud which had been neutralised with waste gypsum from the phosphate industry. The red mud was applied to the soil surface using conventional fertiliser spreading equipment. The other catchment was untreated.The red mud reduced phosphorus loss by 70% from 13.8 kg/ha on the untreated catchment, to 4.2 kg/ha on the treated catchment. Both catchments were treated with 20.4 kg/ha of phosphorus as superphosphate. The catchment treated with red mud also received a further 41.5 kg/ha of phosphorus from the phosphogypsum that was used to neutralise the red mud.Our results show that red mud reduces phosphorus leaching and is potentially a nutrient management option in sandy soils. Red mud has the potential to reduce the impact of agriculture on the estuarine environment and has implications for the continued expansion and intensification of agriculture in the Peel-Harvey catchment.     

无患子表面活性物及其复配体系的性质研究

对天然植物原料无患子提取物中的表面活性物的性质（临界胶束浓度、表面张力和起泡性能）及其影响因素（温度、pH、水硬度和盐度等）进行了系统的研究，结果表明无患子表面活性物具有很低的cmc和γcmc，且在一定范围内受一些因素的影响也不大，是一种理想的香波原料；同时也研究了无患子活性物与其他温和型的阴离子表面活性剂的复配体系，表明具有明显的协同增效效果。     

塑料注射成型新技术——微孔发泡技术的应用

主要介绍微孔发泡技术的工艺过程、应用特性及加工条件、气体条件对微孔发泡过程的影响