基于自适应差分优化的改进虚拟力导向粒子群算法研究

为提高节点在无线传感器网络中的自部署性能,本文以虚拟力导向粒子群算法为基石,在部署区域内,采用正方形网格划分方式,并引入一种改进的自适应差分进化策略,对原算法进行改进。改进算法引入了移动目的地对移动节点的引力作用,并通过自适应调整,有目的的向扩大网络覆盖率的目标进化,从而最大限度地优化节点的部署速度和网络的覆盖率。通过对该算法的性能进行了仿真与分析,在网络覆盖率、算法收敛速度以及部署时间等方面,相比于经典虚拟力算法及虚拟力导向粒子群算法,该算法具有更佳的部署性能。     

Synthesis, fabrication and characterization of poly[3-3′(vinylcarbazole)] (PVK) Langmuir-Schaefer films

Poly[3-3′(vinylcarbazole)] (PVK) was synthetized with N-vinylcarbazole as monomer by oxidative polymerization with ferric chloride. The resulting polymer was then deposited on various solid supports by using Langmuir-Schaefer (LS) method. The pressure-area isotherm of PVK revealed the possibility of compact monolayer formation at air-water interface. Different layers of PVK were doped with iodine vapours. Both scanning probe microscopy and optical microscopy images indicated a good uniformity of the films. The morphology and the thickness of PVK films were investigated using atomic force microscopy. The voltammetric investigation of I₂ doped PVK showed a distinctive electrochemical behaviour. The photoinduced charge transfer across a donor/acceptor (D/A) hybrid interface provided an effective method to study the photoelectrochemical properties of the composite LS films.     

Surface morphology control of immiscible polymer-blend thin films

The effects of the molecular weights (molecular weight of polystyrene, M_w,PS, varying from 2.9 to 129 k) on the surface morphologies of spin-coated and annealed polystyrene/poly (methyl methacrylate) (PS/PMMA=50/50, w/w) blend films were investigated by atomic force microscopy and X-ray photoelectron spectroscopy. For the spin-coated films, when the M_w,PS varied from 2.9 to 129 k, three different kinds of surface morphologies (a nanophase-separated morphology, a PMMA cellular or network-like morphology whose meshes filled with PS, a sea-island like morphology) were observed and their formation mechanisms are discussed, respectively. Upon annealing, two different morphology-evolution processes were observed. It is found that a upper PS-rich phase layer is formed when M_w,PS<4 k, and this behavior is mainly attributed to the low interfacial tension between PS and PMMA component. When M_w,PS>4 k, the PS-rich phase forms droplets on top of the PMMA-rich phase layer which wets the SiO_x substrate. These results indicate that the surface morphology of the polymer blend films can be controlled by the polymer molecular weight and annealing conditions.     

Bumpy Particle Adhesion and Removal in Turbulent Flows Including Electrostatic and Capillary Forces

The effect of electrostatic and capillary forces on bumpy particle adhesion and removal in turbulent flows is studied. We use the JKR theory and account for the increase of adhesion by capillary force. The effects of electrostatic forces and nonlinear hydrodynamic drag are included in the analyses. The criteria for incipient rolling and sliding detachments and electrostatic lifting removal are evaluated. A turbulence burst model is used for evaluating the peak air velocity near the substrate. The critical shear velocities for detaching particles of different sizes under different conditions are evaluated. The electric field strength needed for electrostatic removal of particles with different charges is also estimated. The results are compared with those obtained in the absence of the capillary force. Comparisons of the model predictions with the available experimental data are also presented.     

Effect of organic modifiers on dynamic and static nanomechanical properties and crystallinity of intercalated clay–polycaprolactam nanocomposites

Polymer clay nanocomposites (PCN) of Polyamide6 and sodium montmorillonite are prepared using different organic modifiers (12‐aminolauric acid, n‐dodecylamine, and 1,12‐diaminododecane) to study effect of organic modifiers on structure and nanomechanical properties of PCN. Using X‐ray diffraction and differential scanning calorimetry, crystalline nature of PCNs are evaluated. Nanoscale viscoelastic properties of PCNs are evaluated using nanodynamic mechanical analyzer (NanoDMA). Nanoscale elastic modulus and hardness of PCNs are evaluated using nanoindenter. PCNs show enhancement in elastic modulus, storage modulus, loss modulus, and loss factor by maximum amount of 62.88%, 56.38%, 145.74%, and 71.43%, respectively, and decrease in percentage crystallinity by 16.52% compared to pure polymer. This result indicates that organic modifiers have effect on crystallinity and nanomechanical properties of PCN. To evaluate effect of clay loading on nanomechanical properties of PCN, PCN containing 12‐aminolauric acid is synthesized with different weight percent (3, 6, and 9% of weight of polymer) of organically modified montmorillonite (OMMT), which shows that nanomechanical properties of PCN improves with increase in clay loading. Our study reveals that change in crystallinity of polymer in PCN may have role in the enhancement of nanomechanical properties of PCNs in comparison to pristine polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

基于AD7884的分离脱落电连接器机械分离力测试台的设计

基于分级型模数转换器AD7884对分离脱落电连接器的分离力进行测量,采用8位单片机W77E58与之接口,进行数据处理并通过485串口传输到上位机。实现了对分离脱落电连接器的分离力进行测量,系统运行稳定,且与上位机数据交互简单、可靠。     

浅析SRT-Ⅳ裂解炉炉管弯曲及断裂原因

主要分析计算了裂解炉炉管受力情况，进而得出结论：裂解炉自身结构的相互约束力和炉管渗碳是导致炉管弯曲、断裂的主要原因，并提出了相应的解决措施。     

陶瓷压机预应力结构的分析

对大型液压自动压砖机的预应力结构进行了分析，建立了机架预紧的力学模型，给出了预紧力的计算公式，分析了预应力对结构疲劳强度的影响。最后通过设计实例证明了预应力结构是可靠的。     

六维腕力传感器非线性正解耦方法设计

多维力传感器利用其多个转换单元完成测量加载于其结构上未知负载的作用效果,解耦是其设计的重要组成部分。针对传统静态线性解耦方法的不足,试图将传统线性解耦方程扩展为多项式结构,受其多元高次方式通解形式的启发,构造了一种多项式非线性静态正解耦方程,该方法无需传统线性解耦方法中的曲线拟合、逆解,不依赖以系统是线性为前提,且方程可以扩展成任意结构的多项式。实验结果表明:该方法能降低输出耦合误差。     

动态三螺杆挤出机制备热塑性硫化胶的研究

对比分析了动态热塑性硫化胶(TPV)的加工设备,着重介绍了附加振动力场的三螺杆反应挤出机的结构特点以及利用该机进行三元乙丙橡胶/聚丙烯(EPDM/PP)的动态全硫化,对制品的物理力学性能和微观结构分别进行了测试分析和电镜扫描。结果表明,振动力场作用下EPDM/PP共混体系反应挤出动态硫化加工可有效地实现动态硫化反应、硫化橡胶的粉碎和分散以及相态反转,振动力场的作用明显提高了TPV性能。