AA7005铝合金的热加工变形特性

研究了AA7005合金高温压缩变形时的流变应力、动态回复与再结晶以变形组织变化特征。合金稳态变形时,应变速度、温度和流变应力之间满足包含热激活材料常数的Arrhenius项的双曲正弦关系,变形过程为受位错增殖和相互销毁速率控制的热激活过程,螺型位错的交滑移和刃型位错的攀移为主要动态回复机制。动态回复时,形成典型的变形亚晶组织,亚晶尺寸随1nZ的减小而增大。高温低速变形条件下,合金发生局部几何动态再结晶,流变曲线呈现连续下降的特征,形成与原始纤维组织不同的细小等轴大角度再结晶晶粒。     

非贵金属电解水催化剂改性研究进展

氢能作为理想的二次能源,具有能量密度高、清洁无污染等特点,在能源转型过程中将发挥极为重要的作用。电解水制氢被认为是获取氢能最有潜力的绿色工艺,而高效电催化剂是制约电解水制氢快速发展的关键。贵金属催化剂具有优良的电催化性能,但由于成本和储量问题严重限制其推广应用,因而开发低成本高活性的非贵金属催化剂逐渐成为研究热点。为提高非贵金属催化剂的电催化性能,需要对其进行一系列的改性优化工作。综述了近几年国内外非贵金属电解水催化剂的改性研究进展,详细介绍了几何构造（一维、二维、三维结构）和电子调控（组成优化、晶面调控、缺陷构造、杂原子掺杂等）两种非贵金属催化剂的改性方法,并对今后非贵金属电解水催化剂改性发展方向进行了展望。     

冲压件CAPP系统中几何信息提取实现

基于对AutoCAD的DXF文件格式的详细分析，充分利用多义线的表达简洁性优点，并结合冲压件自身特点，提出了冲压件几何信息获取的方法及程序框架，详细说明了几何信息库的创建方法，并进一步采用Delphi6．0语言编程，实现了冲压几何信息库的建立和几何信息自动提取。     

轴向冲击下波纹腹板梁的失稳控制和能量吸收

针对Sine波纹腹板梁结构,通过设计其初始振幅缺陷,控制不同波形阶数下波纹梁的失稳模态,引导上下翼板按预期渐进、稳定、可重复的压溃变形模式发展.采用Abaqus/Explicit中的显式动力学方法数值模拟初始振幅缺陷与比吸能(Specific Energy Absorption,SEA)的关系.通过对比低阶、中阶和高阶波形的载荷-位移曲线说明波形阶数对吸能特性和失稳控制的影响.结果表明:对于给定的波形阶数,存在初始振幅缺陷的临界值使Sine波纹腹板梁结构达到预期的临界失稳状态,同时SEA最大;初始振幅缺陷越大,失稳控制越容易,但吸能效果随之降低.     

FOF-18结构与性能的量子化学研究

用B3LYP法,在6-31G基组水平上优化了FOF-18的几何构型,得其稳定的几何构型;在振动分析的基础上求得体系的振动频率、IR谱;采用Monte-Carlo方法预估了密度;设计等键等电子反应计算了生成焓;运用Kamlet公式预测爆速、爆压和爆热;将计算性能与CL-20的性能作比较。结果表明,FOF-18整个分子呈N字形,且存在7个强吸收峰,密度2.06g/cm3、生成焓501.03kJ/mol、爆速9411.82m/s、爆压42440.76MPa、爆热6637.46kJ/kg,该化合物的性能与CL-20接近。     

二维参数化图形技术研究进展

近几年来，参数化图形技术得到了不断的发展。目前已有多种参数化图形方法及系统。这些参数化图形方法可分为３种，即变分几何法、几何推理法和过程法。主要介绍这３种方法的研究进展。     

Analysis of a large number of Markov chains competing for transitions

We consider the behaviour of a stochastic system composed of several identically distributed, but non independent, discrete-time absorbing Markov chains competing at each instant for a transition. The competition consists in determining at each instant, using a given probability distribution, the only Markov chain allowed to make a transition. We analyse the first time at which one of the Markov chains reaches its absorbing state. When the number of Markov chains goes to infinity, we analyse the asymptotic behaviour of the system for an arbitrary probability mass function governing the competition. We give conditions that ensure the existence of the asymptotic distribution and we show how these results apply to cluster-based distributed storage when the competition is handled using a geometric distribution.     

亚麻非织造布的缝合加固及其复合材料成型性研究

亚麻纤维通过针刺工艺加工成非织造布,再经缝合加固后,作为复合材料的增强体,与不饱和聚酯树脂复合,制成亚麻/不饱和聚酯复合材料板材及异型件。利用真空辅助树脂传递模塑法制备出的板材,亚麻纤维和树脂结合较为均匀、充分。模压法形成的亚麻非织造布异型件成型良好,无褶皱与破洞。对板材及异型件拉伸、弯曲及压缩等性能的测试结果表明,板材拉伸强度最大值达58.59MPa,弯曲强度最大值为120.26MPa;采用平行缝合工艺的异型件最大破坏载荷为8.99kN。     

Corrosion inhibition of triethanolammonium bromide mono- and dibenzoate as cationic inhibitors in an acidic medium

A weight loss technique was used to determine the corrosion inhibition efficiency of synthesized alkyl mono-and dibenzoate triethanolammonium bromide derivatives (TEAMB, TEADB) in an acidic medium (2 N HCl) at different doses (50, 100, and 200 ppm). The results showed that monoderivatives had a higher corrosion inhibition efficiency than diderivatives. The results were correlated with several factors, including the alkyl chain length of the hydrophobic chains, interfacial tension (IT), critical micelle concentration (CMC), and adsorption free energy of these inhibitors. Increasing the geometric length of the alkyl chains in the synthesized inhibitors had an increasing effect on their corrosion inhibition efficiency, whereas decreasing the CMC and IT had an increasing effect on their tendency toward corrosion inhibition. The number of hydrophobic chains attached to the inhibitor molecules had a vital influence on their efficiency as corrosion inhibitors.