多属性神经网络地震反演在NB油田水平井钻探中的应用

NB油田位于渤海海域,为新近系河流相稠油油田,储层横向分布不稳定,砂体厚度薄、连通性较差,油水关系复杂,开发设计部署了大量水平井。选择神经网络反演方法,建立地震属性与储层参数的非线性关系,进而根据其关系反演得到储层参数数据体,利用该数据体沿层切片提取储层预测信息,研究储层发育规律,指导该油田水平井的部署和钻探,取得了较好的效果,降低了钻探风险。用神经网络地震反演方法进行储层预测研究,指导水平井钻探,在渤海海域尚属首次。     

大港油田关家堡地区不同含油层系气测解释方法探讨

大港油田关家堡地区油气藏特征复杂，不同含油层系油气显示特征不同，气测录井解释符合率相对较低。针对这一情况，通过分析关家堡地区明化镇组、馆陶组和沙河街组的地质和气测显示特征，结合试油结论，提出不同含油层系相应的气测录井解释方法——TR与Wh（湿度比）气测解释法和三角形图板法，归纳总结了全烃及组分在不同层系的变化规律。应用实例表明，效果较好，对于复杂油气藏多层系油气层的解释评价具有一定的借鉴作用。     

沁水盆地北端煤层气储层特征及富集机制

煤层气的富集与储层特征密切相关,并受地质条件的制约。在详细研究煤储层特征及煤层气富集机制的基础上,对沁水盆地北端煤层气的开发前景进行了初步评价。煤岩、煤质、煤体结构及孔渗性、吸附性的观察和测试显示,该区煤层厚度大,热演化程度高,局部发育构造煤,裂隙较发育,吸附性能力强,含气量高,含气饱和度偏低,适合煤层气的开发。该区煤层气的富集主要受控于热演化史和埋藏史。在区域变质的背景上,叠加了岩浆热变质作用,生气强度大。另外,煤层的埋深、顶底板封闭性及水文地质条件都会影响煤层含气量的大小,煤层气富集是多因素有效配置的结果。      

利津地区深层沙三、沙四段油藏测试评价

利用测试资料，将利津地区深层沙三、沙四段油藏分为5种油藏类型：①高压、低-极低渗、导数曲线后期上翘、地层存在非均质性的油藏；②高压、低渗、无污染、双孔介质的油藏；③高压、低-中渗、无-轻微污染的复合油藏；④常-高压、低渗、有污染的油藏；⑤常-高压、极低渗、无污染、干层的油藏。最后对利津地区深层沙三、沙四段各种类型油藏进行了评价，认为利津地区深层沙三、沙四段自然产能较低，一般需要进行改造措施来提高渗透性，提高产能。     

非均质储层模型微观水驱油实验

储层的非均质性不但普遍存在，而且是影响注水开发油藏水驱效率和开发后期剩余油分布的重要因素。利用微观模型水驱油实验，研究了横向、纵向及平面共6种非均质模型在不同注采方式下微观水驱油机理。针对不同非均质模型和注采方式下剩余油分布特点，研究了改变注采方向和驱替压力对提高水驱采收率的影响。改变注采方向后，横向和平面非均质模型采收率分别提高了2．89％和5．42％；对于纵向非均质模型，首次低注高采改变为高注低采后提高采收率3．72％，反之提高了1．26％。提高驱替压力后，横向及纵向非均质模型的采收率分别提高了35．65％和31．26％，平面非均质模型只提高了8．10％。     

混凝土喷锚技术在宝珠寺水电站边坡防护中的应用

混凝土喷锚支护可提高边坡岩土的结构强度和抗变形刚度,增强边坡的整体稳定性和承载能力.本文根据宝珠寺水电站左右岸边坡主要采用混凝土喷锚支护的工程实践,介绍了施工方案设计、材料要求、施工方法、技术措施,以及现场质量管理和检测等问题.     

TBM地区低孔渗高产气储层预测

 本文从TBM地区目的层的地质和地球物理特征分析出发，以三维地震资料为基础，综合利用人工和神经网络波形分类等定性储层预测方法和利用反演及敏感地震属性分析，对TBM地区低孔渗砂岩分布区开展了砂体展布特征分析和天然气高产区预测研究。根据研究结果部署了10口钻井，已完钻的4口井中有3口获得高产气流（其中DK27井日产天然气36.8×10⁴m³）。值得指出的是，目前所用的预测方法还不能预测厚度小于6m的单砂层或砂层组构成的储层。     

Geothermal reservoir simulation

This paper is intended to be a state of the art review of geothermal reservoir simulation. Its recent application to the modelling of real geothermal reservoirs is described and put in the context of an emerging general approach to reservoir modelling. The use of computer simulation for geothermal well test analysis is described. One of the main recent uses of reservoir simulators has been for conducting numerical experiments aimed at improving the understanding of geothermal reservoir physics. Such studies on fractured reservoirs, the thermal structure of reservoirs and the effects of non-condensable gases and dissolved salts are outlined.     

沉积物源的综合识别与岩性圈闭的确定——以柴达木盆地七个泉地区为例

 柴达木盆地西部南区的阿尔金山前带是寻找岩性地层油气藏的有利地区。但该区沉积物源多、砂层薄，仅用常规的、单一的方法难以取得岩性地层油气藏勘探的效果。本文通过建立层序地层格架确定寻找岩性油气藏的主要目的层段，应用重矿物组分、测井响应、波阻抗反演等多种方法进行沉积物源和岩性圈闭的综合识别，在柴达木盆地西部南区七个泉构造斜坡带上确定一个地层岩性圈闭，已获得钻探的证实。     

Multi-Reservoir System Optimization using Chlorophyll-<Emphasis Type="Italic">a</Emphasis> Trophic Indexes

The problem of managing water scarcity by resorting to complex interconnected multi-source water systems needs to utilize management optimization techniques analyzing aspects of water quantity and quality in a common strategy. In the southern regions of Mediterranean Europe, the greater part of water resources for supply systems are derived from artificial reservoirs and water systems can become quite complex since they interconnect several sources and demand centers, as indeed occurs in the Region of Sardinia (Italy). A simplified approach to the requirement to insert water quality aspects in the mathematical optimization model can be achieved by examining the trophic conditions of reservoirs. Trophic State Indexes (TSI) based on Carlson’s (1977) make it possible to insert quality constraints in the water management optimization model also considering complex multi-reservoir and multi-user systems. Model formalization and implementation by the optimization toolkit WARGI (Water Resource system optimization aided by Graphical Interface) (Sechi and Zuddas 2000; Manca et al. 2004; Salis et al. 2005) is illustrated in this paper. The usefulness of a mixed quantity–quality optimization approach has been confirmed by WARGI application to a real multi-reservoir water resources system in southern Sardinia. The optimization model remains computationally efficient dealing with this complex multi-reservoir system and the obtained results can be seen as a reference target in a subsequent simulation phase.