Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.     

陈垃圾土的压缩性试验研究

首先介绍了重庆市主城区填埋场的现状，论述了深入研究陈垃圾土压缩特性的重要性。作者在简要总结了采样场内陈垃圾土的基本物理性质后。通过室内侧限压缩试验(亦称固结试验)，得出了描述陈垃圾土压缩性质的基本参数，如αv、Es、mv和Cc等，试验表明陈垃圾土是一种不同于常见土类的高压缩性欠固结土，试验结果可为填埋场再利用和已封闭填埋场的沉降计算提供依据。     

Surface Hardening of High-Strength Low Alloy Steels (HSLA) Dual-Phase Steels by Ball Burnishing Using Factorial Design

Burnishing is used increasingly as a finishing operation which gives additional advantages such as increased hardness, fatigue strength, and wear resistance. Experimental work based on 3⁴ factorial design was carried out to establish the effects of ball burnishing parameters on the surface hardness of high-strength low alloy steels (HSLA) dual-phase (DP) steel specimens. Statistical analysis of the results shows that the speed, feed, lubricant and ball diameter have significant effect on surface hardness.     

初春施工技术要点探讨

论述了初春施工这个特定的施工季节所具有的特征，从气候、施工人员、工程情况及受冻土体等方面对初春施工易出现的问题进行了分析，对施工过程及施工技术规律性问题做了细化性研究和探讨。     

时空效应规律在软土深基坑工程中的运用

阐述了时空效应规律在软土深基坑工程中的运用情况，实践证明，运用时空效应规律，能可靠而合理地利用土体自身在基坑开挖过程中控制土体位移的潜力而达到保护环境的目的。     

泥土中微量六氯环戊二烯的气相色谱分析

采用SE 3 0为固定液进行色谱柱分离 ,用外标定量法测定泥土中的微量六氯环戊二烯 ,结果最小检知量为 0 .18× 10 - 6 ,相关系数为 0 .99992。     

浅谈采用短木桩加土工网碎石垫层处理挡墙软基

结合工程实例，对采用传统的短木桩加新兴的土工合成材料——土工网及碎石垫层构成复合基础，处理河岸挡墙软基进行探讨，该方法在软土层厚度不超过4．0m的条件下，技术可靠，施工简单，工期短，造价低。     

变压器有载合闸过程中故障分闸后铁心剩磁分析

通过有载合闸变压器模型,分析了变压器有载合闸过程中由于副边突然短路导致主保护动作时电流和磁通的暂态过程,并对变压器铁心内的剩磁作了定性的分析。     

套管钻井用套管外表面磨损后剩余强度分析

在分析讨论套管钻井管柱磨损形态的基础上,结合API5C5实物试验尺寸要求,通过有限元计算分析方法,对钻井套管完钻后含有外表面磨损缺陷的套管柱的极限剩余抗挤强度和极限剩余抗拉强度进行了研究,分别获得了均匀磨损和偏磨条件下,套管钻井套管柱外表面磨损缺陷的临界长度尺寸数值,以及不同破坏失效准则条件下的剩余抗挤强度和剩余抗拉强度的计算方程,为套管钻井中套管柱的设计、计算奠定了理论基础。     

Extending the color gamut and dynamic range of an sRGB image using a residual image

Image sources, such as digital camera captures and photographic negatives, typically have more information than can be reproduced on a photographic print or a video display. The information that is lost during the tone/color rendering process relates to both the extended dynamic range and color gamut of the original scene. In conventional photographic systems, most of this additional information is archived on the photographic negative and can be accessed by adjusting the way the negative is printed. However, most digital imaging systems have traditionally archived only a rendered video RGB image. As a result, it is not possible to make the same sorts of image manipulations that historically have been possible with conventional photographic systems. This suggests that there would be an advantage to storing images using an extended dynamic range/color gamut color encoding. However, because of file compatibility issues, digital imaging systems that store images using color encoding other than a standard video RGB representation (e.g., sRGB) would be significantly disadvantaged in the marketplace. In this article, we describe a solution that has been developed to maintain compatibility with existing file formats and software applications, while simultaneously retaining the extended dynamic range and color gamut information associated with the original scenes. With this approach, the input raw digital camera image or film scan is first transformed to the scene‐referred ERIMM RGB color encoding. Next, a rendered sRGB image is formed in the usual way and stored in a conventional image file (e.g., a standard JPEG file). A residual image representing the difference between the original extended dynamic range image and the final rendered image is formed and stored in the image file using proprietary metadata tags. This provides a mechanism for archiving the extended dynamic range/color gamut information, which is normally discarded during the rendering process, without sacrificing interoperability. Appropriately enabled applications can decode the residual image metadata and use it to reconstruct the ERIMM RGB image, whereas applications that are not aware of the metadata will ignore it and only have access to the sRGB image. The residual image is formed such that it will have negligible pixel values for those portions of the image that lie within the sRGB gamut, and will therefore be highly compressible. Tests on a population of 950 real customer images have demonstrated that the extended dynamic range scene information can be stored with an average file size overhead of about 8% compared to the sRGB images alone. © 2003 Wiley Periodicals, Inc. Col Res Appl, 28, 251–266, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10160