护坡工程空心螺母块立浇及安装施工技术研究与应用

空心螺母块因其外形简单,近年来在河湖生态护坡工程中被广泛应用。但护坡工程使用的空心螺母块数量较多,传统的平浇法预制,所需预制场地大且平整度要求高,螺母块运输安装费时费力、外观质量难以保证。文章针对护坡工程空心螺母块浇筑和安装的特点研究出一种操作简便、切实可行的连续立浇预制安装的施工方法,经过工程实际应用,有效保证了预制块的浇筑质量,提高了预制块的运输铺设效率,节约了预制场地的兴建面积。     

gain bounds for systems with sector bounded and slope‐restricted nonlinearities

This paper proposes a new method for calculating a bound on the gain of a system comprising a linear time invariant part and a static nonlinear part, which is odd, bounded, zero at zero and has a restriction on its slope. The nonlinear part is also assumed to be sector bounded, with the sector bound being (possibly) different from that implied by the slope restriction. The computation of the gain bound is found by solving a set of linear matrix inequalities, which arise from an integral quadratic constraint formulation of a multiplier problem involving both Zames‐Falb and Popov multipliers. Examples illustrate the effectiveness of the results, and comparisons are made against the state‐of‐the‐art. Copyright © 2011 John Wiley & Sons, Ltd.     

温度梯度机理下激光参数对激光成形的影响

以纯铝板和低碳钢板为主要研究对象，对温度梯度机理下激光输入功率、扫描速度、离焦量以及扫描次数等参数与成形弯曲角之间的关系进行了试验研究，深入分析了温度梯度机理下影响成形的主要因素。     

一种新的基于梯度方向直方图的图像配准方法*

构建了一种新的局部梯度方向直方图,同时定义了特征点的主方向,从而提出了一种具有旋转不变性的图像配准算法.首先采用高斯加权求模技术对特征点邻域内的像素的梯度作直方图统计,确定出具有旋转不变性和抗噪性的特征点主方向;然后用主方向作角度直方图统计,确定待配准图像之间的旋转角度.根据得到的特征点信息及旋转角度定义了特征点对互信息匹配准则,这样使得新配准算法对于图像间旋转角度的范围没有限制,获得了良好的配准效果.     

基于时间序列模式表示的异常检测算法*

提出了一种基于时间序列的模式表示提取时间序列异常值的异常检测算法(PREOV).时间序列的模式表示本身就具有压缩数据、保持时间序列基本形态的功能,并且具有一定的除噪能力.在时间序列模式表示的基础上提取异常值,可以大大提高算法的效率和准确性,达到事半功倍的效果.在本算法中,还使用了一定的剪枝策略,使得算法的时间复杂度进一步降低.该算法计算简单、实现方便、无须训练,可以支持时间序列的动态增长.     

倾斜冷却体法制备半固态浆料的研究现状

介绍了低成本、高效率的倾斜冷却体法制备半固态浆料的方法，综述了国内外对该方法的研究现状、相关工艺参数对组织形貌的影响及需要解决的关键问题。     

Effects of temperature and blank holding force on biaxial forming behavior of aluminum sheet alloys

Biaxial forming behavior is investigated for three aluminum sheet alloys (Al 5182 containing 1% Mn (5182+Mn), Al 5754, and 6111-T4) using a heated die and punch in the warm forming temperature range of 200–350 °C. It is found that, while all three alloys exhibit significant improvement in their formability compared with that at room temperature, the non-heat-treatable alloys 5182 + Mn and 5754 give higher part depths than that of heat-treatable 6111-T4. The formability generally increases with decreasing BHP (BHP), but increasing the forming temperature and/or BHP minimizes the wrinkling tendency and improves the forming performance. The stretchability of the sheet alloys increase with increasing temperature and increasing BHP. For the alloys and forming conditions involved in the current study, the formability, measured in terms of part depth, comes mainly from the drawing of metal into the die cavity, although stretching effects do influence the overall forming behavior. The optimum formability is achieved by setting the die temperature 50 °C higher than the punch temperature to enhance the drawing component. Setting the die temperature higher than the punch temperature also improves the strain distribution in a part in such a manner that postpones necking and fracture by altering the location of greatest thinning.     

Al-18%Si合金在梯度强磁场中凝固时初生硅的行为

研究了Al-18%Si合金在10 T梯度强磁场下加热至半固态和全熔态后的凝固过程,观察了初生硅的分布和形态,测定了其冷却曲线.结果表明:在磁场的磁感应强度和磁场梯度的乘积Bz·dBz/dz为正时,初生硅向上部聚集;而在Bz·dBz/dz为负时,初生硅向下部聚集;在强磁场下,加热至全熔态冷却下来的凝固组织中初晶硅的形态发生了明显的改变,由板片状转变为块状,初晶硅显著细化.对强磁场细化初晶硅的机制进行了探讨.     

Investigation on gradient material fabrication with electron beam melting based on scanning track control

A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.     

CdZnTe Crystal Growth by Vertical Gradient Freezing Method

ＣｄＺｎＴｅＣｒｙｓｔａｌＧｒｏｗｔｈｂｙＶｅｒｔｉｃａｌＧｒａｄｉｅｎｔＦｒｅｅｚｉｎｇＭｅｔｈｏｄＨｏｕＱｉｎｇｒｕｎ；ＷａｎｇＪｉｎｙｉ；ＤｅｎｇＪｉｎｃｈｅｎｇ；ＤｕＢｉｎｇ，（侯清润）（王金义）（邓金诚）（杜冰）；ＬｉＭｅｉｒｏｎｇａｎｄＣ...