New developments in CdTe and CdZnTe detectors for X and γ-ray applications

There has been considerable recent progress in II-VI semiconductor material and in methods for improving performance of the associated radiation detectors. New high resistivity CdZnTe material, new contact technologies, new detector structures, new electronic correction methods have opened the field of nuclear and x-ray imaging for industrial and medical applications. The purpose of this paper is to review new developments in several of these fields. In addition, we will present some recent results at LETI concerning first the CdTe 2-D imaging system (20 × 30 mm² with 400 × 600 pixels) for dental radiology and second the CdZnTe fast pulse correction method applied to a 5 × 5 × 5 mm³ CdZnTe detector (energy resolution = 5% for detection efficiency of 85% at 122 keV) for medical imaging.     

两相邻边固定另两边任意支承矩形厚板问题

在Ｒｅｉｓｓｎｅｒ厚板理论中，利用分离变量法得到挠度函数Ｗ（ｘ，ｙ）和应力函数ψ（ｘ，ｙ）的解。在这些解中．选择一些三角级数和多项式作为该问题的挠度函数Ｗ（ｘ，ｙ）和应力函数ψ（ｘ，ｙ），从而得到了两相邻边固定另两边任意支承矩形厚板弯曲问题的精确解．这里不需要繁琐地叠加．     

Hammerstein系统参数的集员辨识

本文运用多输入多输出系统参数的集员辨识的结果讨论了Ｈａｍｍｅｒｓｔｅｉｎ系统参数的集员辨识．在系统动态噪声有界的假定下导出了Ｈａｍｍｅｒｓｔｅｉｎ系统参数的成员集是个椭球，并证明了在一定条件下椭球趋向于一点，文中还给出了仿真例子．     

正则化长波方程的三次样条差分模拟

本文对正则化长波方程(RLW方程)的时间、空间项分别采用三次样条公式进行离散,所得到的差分方程为三点、三层隐格式,对时间的精度为四阶,对空间的精度为二阶,每个时间步只需求解一个三对角方程组,而三次样条配置法在每个时间步中需要求解三个三对角方程组。本文对单个孤立波的演化进行了计算,参数与文[8]相同,其结果与解析解的最大绝对误差均保持在10~(-3)的量级以内,与文[8]给出的数值方法精度相当。对两、三个孤立波的相互碰撞,本文结果显示出在忽略10~(-3)量级的误差后,碰撞前后的孤立波形状保持不变,无论是一个孤立波的演化,还是两、三个孤立波相互碰撞,当将波形放大100倍后均可以发现有振荡的尾波,这说明这类振荡尾波的产生并非真实的物理现象,而是由数值误差产生的。本文认为仅从工程应用的意义上说,RLW方程具有孤立子性质的结论是可以接受的。     

带限信号高频重建的一种新的正则外推算法

本文提出生种新的带限信号的外推方法，该方法能够很好地抑制噪声干扰，且计算复杂性较低，本文给出算法，证明了收敛性，最后给出了误差计算机实验结果。     

用保形样条方法求解非定常对流扩散方程

在欧拉-拉格朗日分裂方法的基础上,本文发展了一种固定网格上的欧拉-拉格朗日分裂方法.保形样条方法(SPSM)被用来解决倒特征线插值问题.通过求解几个有精确解的例子,说明SPSM方法的解是单调无振荡的,并且数值耗散也是比较小的.     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

硼／铝复合材料管构件的界面特性EI

主要研究带钛合金连接头硼／铝复合材料管构件中Ｂ－Ａｌ－Ｔｉ间的界面结构与性质。研究表明，在复合工艺条件下，硼－铝界面附近没有检测到任何铝－硼化合物，而钛－铝间形成ＴｉＡｌ有序金属间化合物相。实验证明，硼／铝复合材料与铝合金端环之间采用的固结方法是有效的，且可按照受载类型随意调整斜面搭接长度，达到承受不同载荷的目的。     

Analysis of brushless three-phase synchronous generator without exciter

Recently, a demand for small-capacity generators has been increasing as electric sources in small ships and automobiles or as portable electric sources driven by engines. It is desired that the structure of small-capacity generators be simple and robust, and that the generators be highly reliable, easily maintained and controlled. This paper describes an analysis of the original brushless synchronous generator without exciter. The output voltage can be adjusted in the wide range by controlling the stator dc current. To analyze the characteristics of this generator, the finite element method is applied. It is found that the results of theoretical analysis agree well with the experimental results.     

滑移线场近似作图法的原理

给出了滑移线场近似作图法的原理、证明以及近似滑移线场的特点，为进一步利用计算机求解应力分布和变形规律，尤其是为近似滑移线的计算机绘制奠定了基础．