高分子破乳剂及其在大庆油田的应用实验

本文文综述了中老油田采出液性质的变化和高含水采出液的油水分离特性，探讨了聚醚型破乳剂和高分子破乳剂在高含水采出液状况下的适应性。通过理论分析和大庆两个联合站的现场实验证明，高分子破乳剂特别适用于高含水采出液的事实，并指出了其适应性和提出了其质量与适应性的评价方法。     

基于MSA法的高心墙堆石坝地震沉降易损性分析

多条带分析法(MSA)是新近提出的一种针对离散强度因子的易损性分析方法,为结构安全评估提供了有效路径,但目前在土石坝工程领域应用较少。本文针对高心墙堆石坝,选取坝顶震陷率为性能指标,建议了轻度、中度和重度破坏三个等级;考虑地震动的随机性,采用MSA法开展了易损性研究,得到了不同破坏等级的易损性曲线和概率,为大坝的强震性能评价提供准则和参考;不同条带数量下地震易损性分析结果表明,适当减少水平条带数量,对易损性结果影响不大,这有利于计算工况的减少。     

近断层脉冲型地震动作用下面板堆石坝的动力响应

越来越多的高土石坝正在西部地区建设或规划中,其中许多位于发震断裂带附近,遭遇近场强震的概率随着大坝数量的增加而增加,近断层脉冲型地震动作用下大坝地震响应特性亟待研究。本文选取10组台湾集集地震实测加速度时程,结合200 m级的面板堆石坝开展动力有限元分析,研究脉冲和非脉冲地震动作用对面板堆石坝的加速度、水平位移以及面板顺坡向应力的影响。结果表明,与非脉冲型地震动相比,脉冲型地震动对大坝堆石体的水平位移和面板顺坡向应力的影响较大,影响程度随着PGV/PGA(地面峰值速度/地面峰值加速度)的增大而增大。因此,在高地震区修建高土石坝时应对脉冲型地震进行专门研究,综合评价大坝的地震安全性和极限抗震能力。     

Fuzzy PID control of space manipulator for both ground alignment and space applications

Considering gravity change from ground alignment to space applications, a fuzzy proportional-integral-differential (PID) control strategy is proposed to make the space manipulator track the desired trajectories in different gravity environments. The fuzzy PID controller is developed by combining the fuzzy approach with the PID control method, and the parameters of the PID controller can be adjusted on line based on the ability of the fuzzy controller. Simulations using the dynamic model of the space manipulator have shown the effectiveness of the algorithm in the trajectory tracking problem. Compared with the results of conventional PID control, the control performance of the fuzzy PID is more effective for manipulator trajectory control.     

考虑重力影响的空间机械臂轨迹跟踪滑模控制

针对空间机械臂由地面装调到空间应用过程中重力环境发生变化的问题,使用滑模控制器对空间机械臂进行控制,通过将配置特殊的非线性结构-fal函数引入趋近律的设计中,提出一种新的基于趋近律的滑模控制方法,并基于李亚普诺夫理论证明了闭环系统的渐近稳定性。仿真结果表明该方法能够很好地完成不同重力环境下机械臂的轨迹跟踪控制任务,并具有较强的鲁棒性。     

湿磨绢云母粉在天然橡胶和丁苯橡胶中的应用

介绍了湿磨娟云母粉在天然橡胶和丁苯橡胶中的应用试验，结果表明，湿磨绢云母粉具有补强性能。作为一种补强填充剂，湿磨绢云母粉应用在橡胶中具有性能价格比优势。     

基于渔船监测系统的近海捕捞水产品溯源

通过对渔船监测系统的船位、航向、航速等信息挖掘,可以进行水产品溯源,保障海洋水产品的食品安全。基于渔船监测系统数据,结合渔场、沿海区划等信息,构建近海捕捞水产品溯源模型,研究渔船溯源、渔区和渔场溯源、渔获溯源,为水产品安全保障提供参考依据。     

Dynamic reaction inside co‐rotating twin screw extruder. I. Truck tire model material/polypropylene blends

Waste ground rubber tire (WGRT) is a complex composite containing various elastomers, carbon black, zinc oxide, stearic acid, processing oils, and other curatives. Most of the waste ground rubber tire is composed of mainly natural rubber (NR) and styrene butadiene rubber (SBR) in varying proportions. Blending it with other thermoplastic materials is difficult due to the inherent thermodynamic incompatibility. But, the compatibility can be increased by making the reactive sites in WGRT with suitable chemicals under optimum condition of shearing inside a twin screw extruder and it is said to undergo a dynamic reaction inside the extruder. To understand the mechanism of dynamic reaction process of a rubber/polyolefin blend, the blending of a truck tire model material rubber with polyolefin was first tried before it was applied to waste WGRT material. It was observed that the blends of a truck tire model rubber material and PP thermoplastic are physical mixture of two incompatible polymers in which a continuous plastic phase is largely responsible for the tensile properties. The rubber particles are the dispersed phase. The large particle size and the poor adhesion of these rubber particles are believed to be liable for the poor tensile properties. In case of blends of truck tire model material with isotactic polypropylene the tensile properties are found to be lower than that of its PP‐g‐MA counterpart which can be attributed to the reaction of the MA with the carbon black particles. A schematic representation of the possible interactions has been proposed. The effect of addition of compatibilizers such as SEBS and SEBS‐g‐MA has also been studied. The tensile and TGA studies indicate that the polarity of SEBS and SEBS‐g‐MA induces an increase in the performance characteristics for both types of polyolefins but the intensity of this increase is higher in the PP‐g‐MA based blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 106: 3193–3208, 2007     

压缩空气冷冻胶粉生产技术研究

介绍了利用新型离心式粉碎机和人字形槽动静压混合式气体轴承透平膨胀机，采用普冷与压缩空气膨胀制冷相结合来生产精细胶粉的工艺路线及关键设备。这种技术具有操作方便、车间干净卫生、能耗低、关键设备可靠性好、生产效率高等特点     

Recycling of ethylene propylene diene monomer (EPDM) waste. III. Processability of EPDM rubber compound containing ground EPDM vulcanizates

The rheological behavior of ethylene propylene diene monomer (EPDM) compounds containing ground EPDM waste (W‐EPDM) of known composition was studied by using a Monsanto processability tester in a temperature range of 90–110°C and a shear rate range of 306.7–1533.24 s^?1. It is found that the shear viscosity decreases slightly with increasing W‐EPDM loading because of wall slip that results from the migration of lubricants from the W‐EPDM. The addition of W‐EPDM to raw EPDM results in a decreased die swell at all temperatures and shear rates. SEM photomicrographs of the EPDM extrudate surface show improved surface smoothness and reduced extrudate distortion when EPDM is blended with W‐EPDM. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2204–2215, 2003