Thin-skin analysis technique for interaction of arbitrary-shape inducer field with long cracks in ferromagnetic metals

In using the AC field measurement (ACFM) technique for non-destructive evaluation (NDE) of metals, a current-carrying wire structure is used to induce eddy current within a thin layer of the metal and a magnetic field sensor to measure the field perturbations in the vicinity of the metal. The sensitivity of ACFM crack detection and sizing relies on an appropriate design of the wire structure geometry together with a dully placement of the sensor. This paper presents an analytical modeling technique for evaluating the electromagnetic field interaction of an ACFM probe with a long uniform crack in a ferromagnetic metallic slab. The probe in the proposed model can have an arbitrary-shape wire inducer with no restrictions on its relative sensor position. The technique is accurate and very efficient computationally. It first uses the two-dimensional Fourier transform to obtain the field distribution at the metal surface. The Laplacian field distribution above the metal is then determined by satisfying the so-obtained boundary condition at air–metal interface. To demonstrate the accuracy of the model, we consider the special case of a rhombic wire inducer. The comparison of our results with those obtained using the conventional algorithm in the literature validates the accuracy of the model introduced in this paper. To show the generality of the model, we also present theoretical and experimental results associated with a solenoid inducer with a three-dimensional geometry for which no analytical solution is available in the literature. The theoretical prediction of crack signal supported by experimental results is used to develop a model-based method for inverting crack signal into crack depth.     

热等离子弧对钢表面淬硬深度的影响

有3种连接方式可以用于等离子弧钢的表面淬火工艺：转移弧、非转移弧和联合弧。本文对比了这3种连续方式的等离子弧对钢表面淬硬深度的影响。试验结果表明，转移弧和联合弧的加热效率比较高，可以获得比非转移弧更深的淬硬深度，但小口径的非转移弧或联合弧的电弧燃烧稳定，比较适合用于等离子弧淬火处理。     

硬质合金磨削温度的实验研究

采用半人工和人工热电偶法，对硬质合金YG6和YT30平面磨削的磨削温度进行了实验研究。并对磨削参数与磨削温度的关系，进行了理论分析及实验验证。结果表明：磨削深度和工作台速度增加，磨削温度升高，但工作台速度的改变，对磨削温度的影响较小．     

影响冷硬铸铁轧辊白口层深度主要因素的回归分析

探讨了影响冷硬铸铁轧辊白口层深度的主要因素。运用数理统计回归分析方法对大量原始生产数据进行处理 ,求得生产条件下冷硬铸铁轧辊白口层深度与主要工艺参数之间的线性关系 ,并进行了理论分析     

缺陷深度脉冲热像检测新方法

介绍脉冲热像检测中由峰值时间求缺陷深度的方法，对热传导性能好的材料，从红外热像时间序列难以捕捉到峰值时间。为此提出了一个既能避开峰值时间又能被红外热像仪探测和记录的新参数，从而达到测量缺陷深度的目的。     

Effects of temperature and current density on the surface hardness and tribological properties of Ti-6Al-4V alloy by molten salt carburization

Surface hardening of Ti-6Al-4V alloy was achieved by carburization in a molten salt bath containing BaCO₃ as the carbon-yielding agent with electrolysis within the temperature range 790–930°C. The hardness of the total carburizing layer (TCD) is influenced by the bath temperature, the applied current density and the carburizing period. The major hardening effect is considered to be the formation of a solid solution of carbon in -Ti. The oxide film wrapping at the outermost surface of cathodically charged specimens, identified to be mainly BaTiO₃, was formed irrespective of the bath temperature during the quenching process and has no effect on the surface hardening. The optimal carburizing parameters obtained in this study for surface hardening are carburizing at 930±10°C (bath temperature) and 0.3 A/Cm² (applied current density) for 90 min (carburizing period), while those for tribological properties improvement are carburizing at 860±5°C and 0.3 A/Cm² for 90 min.     

Effects of blasting parameters on removability of residual grit

This article shows the quantitative evaluation of the residual grit on a blasted substrate, and the removability of the residual grit is examined. Carbon steel plates were blasted by white alumina grit with mean diameters of 338 to 1106 μm. The velocity and the number of grit particles were measured during blasting. The residual grit was removed from a substrate surface by the dissolution of the blasted substrate surface. A mixed acid solution was used as the dissolution solution. The residual grit weight was 7 to 17 g/m². The amount of the residual grit and the penetration depth of the embedded grit increased with increasing grit size. The penetration depth was 5 to 9% of the mean diameter of the grit. The residual grit weight and the penetration depth increased with the increase of the momentum of the grit particle. This article was originally published inBuilding on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference (Seattle, WA), May 15–18, 2006, B.R. Marple, M.M. Hyland, Y.-Ch. Lau, R.S. Lima, and J. Voyer, Ed., ASM International, Materials Park, OH, 2006.     

The integrated intelligent system for welding seam error and penetration depth identification

A integrated intelligent system for seam tracking and penetration control is given. The system received information of welding seam error and penetration depth from only one sensor, then, it realized seam tracking and penetration control simultaneously. This paper introduces constitution of the system, methods of information recognition, design of the neuralfuzzy controller and results practically.     

合理制订渗碳淬火工艺的计算方法

零件通过渗碳淬火工艺获得的有效硬化层深度,受到许多因素的影响。本文阐述和计算零件的材料成分、奥氏体晶粒度、零件质量效果、淬火冷却烈度、各合金元素的淬透性特性值、碳热、淬火加热温度等的影响,并根据计算值同实验值的比较进行适当的修正,制定出合理的渗碳淬火工艺。     

异形坯连铸结晶器内三维流场的数值模拟

根据湍流理论及异形坯连铸的特点, 建立了异形坯结晶器三维流场数学模型, 对不同条件下的流场进行了数值模拟, 分析了水口结构和工艺参数变化时异形坯结晶器内涡心深度的变化规律及液面湍动能的分布状态. 结果表明 采用上倾式水口, 水口夹角为120°, 拉速为0.9m/s时, 结晶器内流场分布较为合理, 液面较稳定. 模拟结果与水模实验结果吻合较好. 该模型可对连铸过程进行离线分析, 确定最佳参数, 并可作为在线控制模型的基础.