野战手术床的CAD设计

介绍在Solid Works平台上建立野战手术床(以下简称手术床)参数化实体建模的基本方法和关键技术，以及利用动画设计软件IPA进行动态模拟，节省了设计时间，提高了设计质量。     

Electrocatalytic hydrogenation of cyclohexanone: Simple dynamic cell design

The electrocatalytic hydrogenation of cyclohexanone has been investigated with catalytic powder particles made of metal nanoaggregates deposited on a nonconductive material such as activated carbon and alumina. The catalytic powder particles were suspended in the solution under vigorous stirring conditions. The brief contact of the powder particles with a porous carbon cathode was sufficient to form adsorbed hydrogen on the metallic nanoaggregates through water electrolysis and initiate the electrohydrogenation process. It is demonstrated that the key parameters of the electrohydrogenation process are both the nature of the metallic nanoaggregates and the nature of the non-conductive material. The hydrodynamics of the solution under vigorous stirring conditions have also been studied for the particular cell used in the present study.     

基于高速摄像的ESPI全场动态特性测量

采用高速摄像与ESPI技术相结合,将运动中的被测物位移随时间变化的状态以序列图像的形式实时记录,并运用图像处理技术,成功地实现了ESPI动态测量。测量了悬臂梁的自由振动过程,获得了悬臂梁的振动周期、振动频率和阻尼系数等动态特性,实验结果与理论计算值相吻合。     

基于概念网络的文本信息监控技术

由于网上信息的迅速增长,文本信息监控已经成为网上信息管理中的热点研究课题。本文在模糊集和语义网络的理论基础上,构建了模糊值动态约束性概念网络,介绍了该概念网络的基本构建方法,并提出了基于概念网络的文本分析算法。     

Characterization of resol resins modified by the addition of PVC plastisols

Plastisols, which are a blend of poly(vinyl chloride) resin and a plasticizer (DEHP), were used as a toughening agent of a resol resin in order to improve the mechanical properties. It was not possible to formulate resol blends by adding more than 10 % of plastisol owing to a lack of apparent homogeneity in the systems, which also showed many air bubbles. The relationship between dynamic mechanical, mechanical and thermal properties and the amount of plastisol added was studied. It was determined from the infrared spectroscopy and dynamic mechanical results that the resol–plastisol blends seem to be formed by a reaction between the phenol and PVC giving a higher crosslinked structure. An improvement in the thermal resistance of the blends at lower temperatures was observed with an increase in the percentage of plastisol. Flexural analysis showed the elastic behaviour of the systems. However, it was not possible to observe the effect of the plasticizer (DEHP) owing to the low quantity of plastisol that was added to the resol. Copyright © 2004 Society of Chemical Industry     

水轮发电机转子动平衡的时-频方法

提出了一种基于时域分析和频域分析的动平衡方法，应用于水轮发电机转子的动平衡。在这种时-频动平衡方法中，用时域分析来确定不平衡力的相位，用频域分析来确定不平衡力的大小。该方法具有平衡精度高、起机次数少的优点。用1台300MW水轮发电机转子的现场试验数据验证了该方法的准确性和适用性。     

应变式压力传感器特性补偿和应用

讨论了用动态补偿数字滤器对应变压力传感器的动态特性进行补偿，使之提高测量精度并能用于爆炸冲击波测量的一种方法。实验结果与经验值比较，补偿前．后对比、测量精度有明显提高，说明在一定条件在变式测压系统也可用于爆压的测试。     

Decomposition of Time Series Dynamic Linear Models

This paper derives the admissible decompositions for a time series dynamic linear model, assuming only that the model is observable. The decompositions depend on factorizations of the characteristic polynomial of the state evolution matrix G into relatively prime factors. This generalizes the method of West (1997 ) which considers one decomposition in the particular case where G is diagonalizable. Conditions are derived for a decomposition to be independent. These results show that no autoregressive process of order d has an independent decomposition for any integer d . Two illustrations of this procedure are discussed in detail.     

应用吸水剖面资料确定吸水层动态残余油饱和度的方法

基于岩心长期注水试验资料，认识到吸水层的残余油饱和度的变化是一个缓慢减小的过程。文章给出了动态残余油饱和度的概念，提出了利用吸水剖面测井资料来确定动态残余油饱和度的方法。通过现场实测资料的解释，建立了动态残余油饱和度与吸水层每米累计吸水量的定量关系，为剩余油分布研究提供新思路。     

Numerical simulation of substrate effects on spinodal decomposition in polymer binary mixture: Effects of the surface potential

The surface-directed spinodal decomposition (SDSD) of polymer binary mixture with different values of surface potential is numerically simulated in three-dimension (3D) by cell dynamic systems (CDS). Furthermore, the growth laws of the wetting layer are theoretically analyzed by the current equation and the dynamical scaling. The results show that the thickness of the wetting layer increases with the increasing surface potential. The crossover, which is later for larger values of surface potential, appears in the evolution curve of the wetting layer. Before the crossover, the growth law is the surface potential dependant growth law. Subsequently, the growth law is the typical Lifshitz-Slyozov (LS) growth law. The results indicate that the surface potential can result in the mutual transformation between completely wetting and partially wetting for the substrate interface. It can be found that the higher surface potential leads to the faster and stronger transmission of the effect of the substrate on the spinodal decomposition in the bulk.