功率管焊接质量射线检测

介绍采用射线方法检测功率管芯片与基座之间的焊接质量。试验证明，选用合适的透照参数可使X射线照相和X射线实时成像对焊接部位的检测均得到较高的对比灵敏度，但X射线照相法成本低廉，一次可透照多个工件，效率高，为该功率管焊接质量的理想检测方法。     

浅谈机电安装工程施工技术与质量管理

根据工程实例，分析了循环流化床锅炉的磨损问题，并提出了解决措施，结合实例论证了机电设备安装的重要性，指出只有抓好机电安装工程施工技术与质量管理，才能增加企业效益，提高企业竞争力。     

地下水污染修复的活性渗滤墙技术

活性渗滤墙是一种现场修复受污染地下水的新型技术，具有原理简单，施工方便，运行费用低廉等特点，活性渗滤墙垂直于地下水流动方向设置，当地下水流通过活性渗滤墙时，污染物与墙体材料发生化学反应，从而达到环境修复的目的。文中综述了活性渗滤墙技术的修复机理和实际应用，大量研究表明，应用金属铁作为活性渗滤墙材料，可以去除地下水中的重金属以及有机污染物，目前活性渗滤墙已经在世界各地应用，是一种非常有发展前景的环境污染修复技术。     

东营凹陷古近系砂岩储集层特征对比

东营凹陷可分为北部陡坡带、中央隆起带和南部缓坡带，由于地质背景有差异，古近系砂岩储集层在不同地区的特征不同：北部陡坡带以近岸水下扇砂砾岩沉积为主，进入晚成岩期的时间早，深度浅，次生孔隙发育中等，主要分布在1650-2450m深度，3200-3500m深度存在第二次生孔隙带，碳酸盐溶蚀和胶结作用在垂向具有分带性；中央隆起带以浊积扇砂岩为主，但由于断裂发育，酸性水活跃，进入晚成岩期的时间也较早，次生孔隙最发育，又分布范围大，1800-3500m深度均发育次生孔隙，碳酸盐胶结弱，储集层物性最好；南部缓坡带以滨浅湖和三角洲沉积为主，进入晚成岩期的时间晚，次生孔隙发育少，北部和中部物性相对差。图4表1参31     

Use of ultrafiltration for preparing improved tomato pulp

The characteristics of high-quality tomato pulp (commercial def.: crushed or diced tomatoes with about 30% tomato juice as packing medium) canned with tomato juice pulp enriched by ultrafiltration as packing medium were compared with those covered with conventional vacuum-concentrated juice.
Both hot- and cold-break products were prepared and those containing 20% serum-reduced packing juice proved to be the best, showing no signs of syneresis on storage and with improvements in sensory properties, colour and non-enzymatic browning; some volatile components were reduced.     

Dough mixing and breadmaking properties of quinoa-wheat flour blends

Flour blends of quinoa-wheat containing 0, 5, 10, 15, and 20% of manually dehulled quinoa meal or flour were evaluated for dough mixing and breadmaking properties and liking of the bread by a small panel. Increasing amounts of quinoa meal or flour increased farinograph absorption and dislike of bread for most of the panel. Dough development time increased with increase in meal but decreased with increase in quinoa flour. At 10% inclusion levels differences in liking from control 100% wheat flour bread were smaller for flour or water extracted meal to most of the panel, than with 10% non-extracted meal. This suggests that 10% inclusion of flour or water extracted meal may have potential for further investigation.     

精密深孔表面环状硬挤条纹的产生机理与控制

本文建立了不同条件下环状硬挤条纹的生成模型,详细分析了其产生机理.用理论解析和试验验证了所建模型的可靠性,最后提出了控制其产生的方法.     

Water quality surveys: A statistical method based on determinism, quantiles and the binomial distribution

A statistical method for surveying water quality and analysing the results in terms of quantiles is described. The value of a water quality variable in a grab-sample is taken as a deterministic function of the temporal and spatial coordinates of the sampling point. Quantiles can then be defined for any specified region in time and space as unique, fixed values, and randomly located grab-samples may be used to estimate them for the purposes of describing or regulating water quality. Robust statistical inferences are possible using the binomial distribution. Properties of the quantiles, confidence limits, comparisons with fixed values or between regions, assessment of trends, simultaneous inferences and estimation of sample sizes are discussed. Two examples of water quality surveys, one of Port Phillip Bay, the other of the Maribyrnong River, Victoria, are used to illustrate the theory, paying particular attention to practical problems which arose. The proposed method is compared with others based on stochastic models, and is claimed to be simpler and more reliable.     

山前平原地下水侧向补给潜力空间变异模拟

SWAT模型利用分辨率较高的DEM数据,可以估算山前地下水侧向补给的空间变异,并可以计算不同降水年型下补给量的差别。模拟需要对研究区进行填洼、流向确定、汇流和河网水系的提取四步运算,并对河道临界支撑面积的取值进行分析。分别模拟了平水年和丰水年两种降雨年型下研究区13个出水口的地下水侧向补给潜力。在研究区,由于地形的变化,导致山与平原交接断面上出水口的集水面积变异非常大,因此山前平原所接受的地下水侧向补给量的空间变异也非常大。不同的降雨年型下,降雨量转化为地下水侧向补给量的比例也不同。平水年的转化比例较小,丰水年的转化比例较大。应用SWAT模型时,与ArcView的拓展模块有机结合,可以更方便提取完整的大流域,划分出合理的子流域。     

水工钢闸门聚酯玻璃钢复合防腐处理方法

水环境的恶化，使水工钢闸门腐蚀加重，传统的防腐工艺保护效果下降。聚酯玻璃钢复合防腐层的水工钢闸门防腐工艺具有使用设备少，工艺简单、防腐效果好、成本低等优点，适用于在各种水环境中作各种形式的水工钢闸门防腐，效果良好。该文结合江苏省淮海农场工程施工经验，提出了水工钢闸门聚酯玻璃钢复合防腐层结构设计、施工工艺及质量标难，为今后的推广应用提供了一定的参考依据。