Selective area epitaxy of CdTe

We have performed selective area epitaxy (SAE) of CdTe layers grown by molecular beam epitaxy using a shadow mask technique. This technique was chosen over other SAE techniques due to its simplicity and its compatibility with multiple SAE patterning steps. Features as small as 50 microns × 50 microns were obtained with sharp, abrupt side walls and flat mesa tops. Separations between mesas as small as 20 microns were also obtained. Shadowing effects due to the finite thickness of the mask were reduced by placing the CdTe source in a near normal incidence position. Intimate contact between the mask and the substrate was essential in order to achieve good pattern definition.     

An investigation of pore cracking in titanium welds

Two welded Ti-6A1-4V pressure vessels leaked prematurely in service. The leaks were caused by cracks emanating from weld porosity. The cracks originated during fabrication, with subsequent growth in service leading to the formation of the leak paths. Pore cracking is thought to be caused by a mechanism that involves both sustained-load and cyclic contributions, with the former being the more prominent. It is shown that the tendency for cracking is influenced by pore position and that pore size is not a deciding factor in that regard. The factors that govern pore cracking are discussed, and the possible role of interstitial embrittlement is assessed.     

State multiplicity in CSTR-separator-recycle polymerisation systems

This article continues earlier work (Comput. Chem. Eng. 24 (2000) 209) concerning the design and control of isothermal reactor-separator-recycle systems. The multiplicity behaviour of six reaction systems of increasing complexity, from one-reactant, first-order reaction to chain-growth polymerisation, is investigated. Below a critical value of the plant Damkohler number, Da<Da^cr, the only steady state involves infinite flow rates. Feasible steady states become possible if the critical value is exceeded, Da>Da^cr. For one-reaction systems, one stable steady state is born at a transcritical bifurcation. For consecutive-reaction systems, including polymerisation, a fold bifurcation can lead to two feasible steady states. Moreover, the transcritical bifurcation is destroyed when two reactants are involved. If the gel-effect is included, a maximum of four steady states are possible. When multiple steady states exist, the achievable conversion is constrained by the instability of the low-conversion branch. This has practical importance for polymerisation systems when the radicals’ quasi-steady state assumption is not valid or the gel effect is significant.     

Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

利用短周期地脉动推断深层地基S波速度

从二维随机波场的相关理论出发，提出了如何从短周期地脉动（频率＞０．５Ｈｚ）时域信号中计算Ｒａｙｌｅｉｇｈ波弥散曲线，进而反演深层地基剪切波（Ｓ波）速度的理论方法和分析技术，并结合实测信号的分析结果，探讨了该方法的可行性和实用性。     

强化管理机制推进机械制造企业快速发展

随着国有企业改革的不断深化,市场竞争愈加激烈,针对机械行业的现状,从3个方面探讨了强化管理机制,推进机械制造企业可持续快速发展的途径.     

Mechanism for the Peritectic Reaction and Growth of Aligned Grains in YBa2Cu3O6+x

It is experimentally observed that the peritectic reaction, 211 + liquid → 123, can be driven essentially to completion in 1 h at an undercooling of only ∽30°C. The kinetic data, together with the observed microstructures, are inconsistent with the normal mechanism of the peritectic reaction. It is proposed that the mechanism of the reaction involves dissolution of 211 particles into the liquid and precipitation of solid 123. The aligned grain structure is explained through sympathetic nucleation of new 123 grains on existing grains.     

Microstructure of Silicon Carbide Whiskers Synthesized by Carbothermal Reduction of Silicon Nitride

The microstructure of silicon carbide whiskers synthesized by carbothermal reduction of silicon nitride has been studied using transmission electron microscopy. All of the whiskers examined are single crystals, and grow in the (111) crystallographic direction. Two different forms of stacking faults and microtwins were observed; in one the planar defects are normal to the whisker growth direction, and the other has the defect planes at an angle of about 70° to the growth axis, while both forms of the defects are on the [111] closed-packed planes. Without the addition of catalyst, droplets containing metallic impurities were not found at the tips of the whiskers synthesized by the present process. A core and outer regions were observed in the single-crystal whiskers, which may be evidence that the whiskers were formed by a two-stage mechanism.     

INHIBITION OF BEER-SPOILAGE LACTIC ACID BACTERIA BY NISIN

149 strains of bacteria, mostly brewery contaminants able to spoil wort or beer, and 12 brewing strains of yeast (8 ale and 4 lager strains) have been screened using a well-test assay for sensitivity to the food preservative, Nisin (E234), Nisin inhibited growth of 92% of the gram-positive strains, predominantly lactic acid bacteria of the genera Lactobacillus and Pediococcus. In contrast, all 32 gram-negative strains tested, except 3 Flavobacter strains, were Nisin-resistant; in addition none of the brewing yeasts showed Nisin-sensitivity. Therefore. Nisin has potential applications in preventing spoilage of worts or beers by lactic acid bacteria.     

Polyethylene mixed crystal infra-red spectroscopy: The influence of matrix isotopic species on guest conformation

The chain conformation of solution-crystallized polyethylene has previously been confirmed by infra-red spectroscopy, using the CD₂ bending bandshape for samples with a minority of the deuterated species^1–3. The method of calculating the i.r. band profile from molecular conformational models is now developed to give a more accurate representation of doublet splittings and to include the singlet component. The CH₂ bending profile is calculated for samples with a deuterated matrix, and the good agreement with experimental data indicates that the same molecular model is applicable for samples with the deuterated polymer as either guest or matrix, for identical crystallization conditions. This result implies that isotopic fractionation is unimportant under these conditions.