Biosorption of Phenol onto Posidonia oceanica (L.) Seagrass in Batch System: Equilibrium and Kinetic Modelling

In this research, the biosorption of phenol using the fibres of a Mediterranean seagrass Posidonia oceanica (L.) was studied. Batch experimental procedures were made to investigate the ability of this novel marine biomass to remove phenol from aqueous phase. The influences of pH and contact time at different initial concentrations were evaluated. The results showed that biosorption capacity was enhanced using solution pH equal to 5.2. The modelling results showed that pseudo‐second‐order and Redlich‐Peterson models were found to be the most suitable to satisfactory describe the kinetic and equilibrium adsorption data, respectively.     

热轧带钢连续冷却过程中相变体积分数的计算

基于相变动力学原理 ,在充分考虑变形对相变影响的情况下研究了奥氏体向铁素体、珠光体和贝氏体相变的动力学。探索了热轧带钢连续冷却过程中相变体积分数的计算方法。用此方法进行的计算机模拟与实验结果相当吻合。     

Reactor modelling for electrochemical processes

This paper presents a relatively straightforward approach to the modelling of electrochemical reactors operated in batch or continuous modes. The models are based on ideal flow assumptions of either well-mixed or plug flow and incorporate reaction rate models based on electrochemical kinetics and mass transport at one electrode. General characteristics of the reactor models are described, particularly with regard to the need for good mass transport in metal recovery applications. An example is given on the use of the model in the recovery of a heavy metal (Cd²⁺) from an acidified solution containing Cd(II) and Fe(III) ions. The reaction rate model is based on experimental data.     

DCPTA合成新方法的研究

ＤＣＰＴＡ是近年来新发现的一种植物生长调节剂。对农作物具有明显的增产增质效果。文中就其新的合成方法进行了研究。     

Oxidation of Silicon Carbide in Environments Containing Potassium Salt Vapor

At high temperatures in clean oxidizing environments, SiC forms a very protective SiO₂ film, but, in environments containing low levels of gaseous alkali salt contaminants or where condensed salts may deposit on the surface, the resistance of the film is significantly reduced. Oxidation kinetics of SiC were measured by continuous thermogravimetric analysis in a controlled environment containing CO₂, H₂O, and O₂ plus low levels of potassium-containing salts. Potassium was found to be incorporated into the SiO₂ scale and to significantly change its transport properties and its morphology. The rate of scale formation was found to increase directly in proportion to K in the scale. A change in mechanism was observed when water vapor was added to the reacting gas stream.     

氧气放电辅助激光淀积原位制备高T_c超导薄膜

采用低压氧气放电辅助的激光淀积方法,原位外延生长出零电阻温度91K,临界电流密度10~5A/cm~2的Y-Ba-Cu-O高温超导薄膜。扫描电镜和X光衍射分析结果表明,薄膜中超导相晶粒的生长具有c轴垂直于表面的择优取向。     

Bulk growth of Hg0.8Cd0.2Te single crystals by a combined CVT-seeding technique

The growth of high quality Hg_0.8Cd_0.2Te bulk single crystals by CVT, combined with an in-situ seeding technique, is reported here for the first time. For this purpose, a temperature difference of 590° → 540° C with a gradient of 40°-50° C/cm at the solid-vapor interface, and about 0.1 atm of HgI₂ as a transport agent, were employed. The bulk crystals have the expected stoichiometry and compositional homogeneity. Etch pit densities of 10⁴-10⁵ cm⁻² on the (111) face and hitherto unreported etch pits on the (100) face were observed in this work. Possible origins of the sub-grain structure are discussed.     

A time series approach to fatigue crack propagation

The inherently nonlinear phenomenon of fatigue crack propagation is modeled as a linear random process. To a first approximation, simple, nonstationary time series models are introduced and standard techniques for determining the parameters of autoregressive integrated moving-average processes are applied. Multiplicative time series models are next utilised for the representation of a group of crack history curves. Implementation of the models on the Virkler experimental data set yields satisfactory results. Reliable Gaussian approximations to the distribution of the time required by a crack to reach a specified critical length are obtained, and the usefulness of the approach is demonstrated when updating lifetime predictions after periodic inspections.