Corrosion fatigue short crack growth behaviour in a high strength steel

The influence of an aggressive environment (0.6 M, aerated NaCl solution) on short fatigue crack initiation and growth behaviour has been studied. The study involved three major test series, namely: air fatigue, corrosion fatigue, and intermittent air fatigue/corrosion fatigue. The above tests carried out under fully reversed torsional loading conditions at a frequency of 5 Hz, showed that it was the non-metallic inclusions which took part in crack initiation resulting from debonding at metal matrix/inclusion interface and pitting of inclusions in both air and corrosove environments, respectively. Short fatigue crack growth results in these two environments obtained by using plastic replication technique, indicated a large effect of microstructure i.e. prior austenite grain boundaries. The stage/stages at which the environmental contribution was dominant has been discussed by considering the results achieved from intermittent tests. However, the mechanisms involved in corrosion fatigue short crack growth have also been described in the light of results obtained from futher investigations carried out by conducting corrosion fatigue tests under applied cathodic potential conditions and tests on hydrogen pre-charged specimens under air fatigue and uniaxial tension conditions.     

薄膜生长的计算机模拟

薄膜技术在现代科技领域中有着广泛的应用。人们对薄膜的生长过程通过理论和实验进行了深入的研究，其中计算机模拟是重要的方法，本文概述了对薄膜生长过程的实验观察结果及其理论分析，主要讨论了薄膜生长的计算机模拟中经常采用的方法-蒙特卡罗法和分子动力学方法、描述衬底上成膜粒子运动的一些模型以及在计算机模拟中需注意的一些问题，其中主要包括粒子间的相互作用，入射粒子的能量和粒子上的衬底上的扩散运动。     

布里奇曼法生长碲镉汞晶体的缺陷及其展望

简单介绍了布里奇曼法生长碲镉汞晶体的主要缺陷以及缺陷的控制原理，回顾了国内进行磅镉汞晶体生长的布里奇曼法及加速坩埚旋转技术的布里奇曼法（ＡＣＲＴ－Ｂ）研究的情况，并提出了进一步研究的问题。     

SO_4~(2-)-Fe_2O_3/Hβ增强酸催化剂上合成乙酸丁酯

将超强酸中心引入Ｈβ沸石表面，制备出具有增强酸性的ＳＯ２－４－Ｆｅ２Ｏ３／Ｈβ催化剂，并用于乙酸与正丁醇的酯化反应。采用数学模拟方法定量表征该催化剂的酸强度分布。建立了合成乙酸丁酯反应动力学模型。讨论不同类型沸石、氧化物改性对酯化反应性能的影响及表面酸性与酯化性能的关系。     

Nucleate Pool Boiling of Pure Liquids and Binary Mixtures：PartI－Analytical Model for Boiling Heat Transfer of Pure Liquids on Smooth Tubes

ＮｕｃｌｅａｔｅＰｏｏｌＢｏｉｌｉｎｇｏｆＰｕｒｅＬｉｑｕｉｄｓａｎｄＢｉｎａｒｙＭｉｘｔｕｒｅｓ：ＰａｒｔＩ－ＡｎａｌｙｔｉｃａｌＭｏｄｅｌｆｏｒＢｏｉｌｉｎｇＨｅａｔＴｒａｎｓｆｅｒｏｆＰｕｒｅＬｉｑｕｉｄｓｏｎＳｍｏｏｔｈＴｕｂｅｓＧｕｏｑｉｎ...     

PC／PET共混物的非等温结晶动力学

采用等速变温ＤＳＣ法对ＰＣ／ＰＥＴ共混体系的非等温结晶动力学进行了研究，结果表明，从玻璃态结晶时，随着ＰＣ含量的增加，ＰＥＴ组分的结晶速率先增加后降低。耐从熔体结晶时，体系的结晶速率随着ＰＣ含量的增加而增加，讨论了ＰＣ对ＰＥＴ组分结晶过程的影响。     

几种高强度钢腐蚀疲劳裂纹扩展行为的研究

本文研究了ＧＣ－４，３０ＣｒＭｎＳｉＮｉ２Ａ和３００Ｍ超高强钢的腐蚀疲劳裂纹扩展行为。考虑了环境，热处理制度，应力比和频率对裂纹扩展的影响。研究结果表明：腐蚀环境和热处理制度对疲劳裂纹扩展有显著影响。在侵蚀性环境中随频率降低，裂纹扩展大幅度上升，随应力比提高，环境影响加剧。利用扫描电镜对试样断口形貌进行了分析，并讨论了高强钢的腐蚀疲劳机理。     

Sixty years of dislocations

It is well-known that with the appearance of three independent papers by Taylor, Polanyi and Orowan in the year 1934, the concept of crystal dislocations was born. Since then, dislocation theory has had many spectacular successes. It is quite appropriate therefore to be aware of the state of development of this exciting subject, sixty years after its discovery. A flavour for the vast subject of the applications of dislocation mechanisms to real materials is presented by choosing three examples, one each, drawn from metallurgy, physics and electronics. The topic of ‘Strength of metals and alloys’ is the first one, as this is also the author’s area of research. The phenomenon of solidification and crystal growth forms the next topic, especially in view of the seminal contributions made by A R Verma and his school from India. Dislocations play a useful role in the strengthening of solids, but how influential are they in affecting the performance of modern semiconductor devices? In the third example, the interesting and painstaking work done to settle this question is reviewed. Can we regard carbon fibre as thetransistor of dislocation theory? How shall we understand the long-established effects such as corrosion-fatigue, superplasticity and shape memory as well as the electrochemical and electro-mechanical properties of dislocations in semiconductor and non-metallic crystals? Answers to these questions belong to the realms of the future developments in dislocations. The talk is concluded with a discussion of these topics.     

超薄SiO2层的热生长

隧道小孔中超薄ＳｉＯ２的生长是ＥＥＰＲＯＭ电路制造的关键工艺之一。采用ＳＵＰＲＥＭ－Ⅲ工艺模拟程序对超薄ＳｉＯ２的热生长进行了工艺模拟，经过大量的工艺实验及优化，确定了超薄ＳｉＯ２的最佳生长条件，生长出的ＳｉＯ２性能良好，完全可满足ＥＥＰＲＯＭ研制的要求。     

Energy Value of Resistant Starch

Resistant starch was evaluated for energy value using fine silica and normal starch as controls and young rats as a test model. The net increase in rats' carcass energy due to the test materials fed over a 3-wk period formed the basis for assessing energy value. Rats fed normal starch deposited about twice as much fat and significantly more protein in the carcass than those fed either resistant starch or silica. Rats fed resistant starch or silica showed similar growth responses and increases in components of body composition and carcass energy content. This suggested that resistant starch provided, like silica, no energy.