Simultaneous measurement of flow pattern and mass transfer coefficient in bubble columns

Mass transfer studies were carried out in a bubble column using the chemical method. Catalytic oxidation of sodium sulfite was chosen for the studies and the corresponding specific rates of oxidation were obtained using a stirred cell. Laser Doppler anemometer (LDA) was used to measure the instantaneous velocities in the same stirred cell as well as in bubble columns (100 and i.d.). An efficient algorithm based on the multiresolution analysis of the velocity-time data using wavelets was used for the isolation of data belonging to the gas and liquid phases. Eddy isolation model was used for the characterization of the eddy motion including the estimation of the energy dissipation rate. Using the knowledge of eddy motion, a methodology was developed for the prediction of true mass transfer coefficient (k_L) in a stirred cell as well as in bubble columns. The predicted values of k_L have been compared with the experimental values obtained by the chemical method.     

Changes in the Peeled Surfaces of Copper Thin Films Deposited on Polyimide Substrates After Heat Treatment

Peel strength between a copper (Cu) thin film and a polyimide (pyromellitic dianhydride-oxydianiline, or PMDA-ODA) substrate is reduced by heat treatment at 150°C in air. In this work, we investigated the peel strength, the morphology of the interface between Cu films and polyimide substrates using optical microscopy and electron microscopy, and chemical change of the interface using Auger electron spectroscopy (AES) and micro X-ray photoelectron spectroscopy (XPS). The analysis showed that CuO “lumps” were present on the peeled surface of PMDA-ODA after heat treatment at 150°C in air. The peeled surfaces of other polyimide substrates were also analyzed: biphenyl dianhydride-para phenylene diamine (BPDA-PDA) and biphenyl dianhydride-oxydianiline (BPDA-ODA). CuO lumps were present on the peeled surface of BPDA-ODA after the heat treatment, but not that of BPDA-PDA. Compared with the adhesion strength for the Cu thin film, the adhesion strength was high for the Cu/PMDA-ODA and Cu/BPDA-ODA laminates, but the adhesion strength was very low for the Cu/BPDA-PDA laminate. This low strength is the reason that CuO lumps were not detected on the peeled surface of the BPDA-PDA substrate. These CuO lumps were related to the adhesion degradation of the Cu/polyimide laminates after the heat treatment.     

Effect of agitation in the hydrogenation of castor oil

Castor oil was hydrogenated to evaluate the effect of agitation during hydrogenation. The turbine and propeller impellers were evaluated during hydrogenation of castor oil at various temperatures, pressures, and catalyst concentrations. The effect of impeller position in the agitator at definite oil depth was also evaluated. Hydrogenation of castor oil at 130°C, 2.0 kg/cm² hydrogen gas pressure with 0.5% Ni catalyst for 6 h while using two turbine impellers fitted in an agitator, one close to the reactor bottom and another at a height just below the top oil layer, revolving at 350 rpm, resulted in a product of a iodine value of 4.1, hydroxyl value of 156.4, and slip point of 84°C.     

氯醇化管道反应新工艺的压降和传质的研究

氯醇化管道反应新工艺是环氧丙烷生产过程中关键步骤，该反应属气液非均相系统，但装有Ｋｅｎｉｃｓ型静态混合构件的管道反应器用于气液系统还缺乏大量的基础数据。研究以Ｎ２－Ｈ２Ｏ２作为实验系统，测定了不同工况下压降和氧含量，并应用一心均相模型救是了相应的摩擦系数和传质系数。     

Transient Hot-Strip Method for Simultaneous Determination of Thermal Conductivity and Thermal Diffusivity of Refractory Materials

The transient hot-strip method has been used for determining thermal conductivity and thermal diffusivity of a refractory brick. The technique is based on recording the transient temperature increase of a 25-μm-thick, 8-mm-wide, and 70-mm-long iron strip clamped between two sample halves and heated with a constant direct current. The method is accurate to within 5% in the thermal conductivity and to within 10% in the thermal diffusivity in the temperature range 20° to 700°C.     

Electrochemical reduction of benzyl halides at a silver electrode

The electrochemical reduction of benzyl halides PhCH₂X (X = Cl, Br and I) has been investigated at Ag and glassy carbon (GC) electrodes in CH₃CN + 0.1 M Et₄NClO₄. At both electrodes reduction of PhCH₂X involves irreversible electron transfer concerted with breaking of the carbon-halogen bond. All three halides exhibit a single 2e⁻ reduction peak at GC, whereas up to three peaks can be observed at the Ag electrode. Silver exhibits remarkable catalytic properties for the reduction process, which is positively shifted by 0.45-0.72 V with respect to GC. The mechanism of reduction of the organic halides at Ag involves adsorption of both the starting reagents and their reduction products. Adsorption of PhCH₂Cl and PhCH₂Br is weak and slow, whereas PhCH₂I is more rapidly and strongly adsorbed, so that two distinct peaks can be observed for the reduction of the dissolved and adsorbed molecules. Controlled-potential electrolyses at Ag have shown that the process may be directed to the production of bibenzyl or toluene, depending on the applied potential.     

Heat‐resistant hydrophobic–oleophobic coatings

Thermally and chemically durable hydrophobic oleophobic coatings, containing different ceramic particles such as SiO₂, SiC, Al₂O₃, which can be alternative instead of Teflon, have been developed and applied on the aluminum substrates by spin‐coating method. Polyimides, which are high‐thermal resistant heteroaromatic polymers, were synthesized, and fluor oligomers were added to these polymers to obtain hydrophobic–oleophobic properties. After coating, Al surface was subjected to Taber‐abrasion, adhesion, corrosion, and thermal tests. The effects of the particle size of ceramic powders, organic matrix, and heat on the coating material were investigated. Coating material was characterized by FTIR spectrophotometer. Surface properties and thermal resistance of the coating materials were investigated by SEM and TGA analyses. After thermal curing, contact angles of these coatings with H₂O and n‐hexadecane were measured. It was observed that coatings like ceramic particles are more resistant against scratch and abrasion than the other coatings. Also, they are harder than coatings, which do not include ceramic particles. It was seen that coatings, containing Fluorolink D10H, have high‐contact angles with water and n‐hexadecane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2386–2392, 2006     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Thermal and flow properties of oils from salmon heads

Thermal and flow properties of unrefined oils from the heads of red or pink salmon were evaluated. Major thermal degradation of the salmon oils occurred between 200 and 450°C. Red and pink salmon oils were completely decomposed at 533 and 668°C, respectively. The phase transition of salmon oils occurred over a wide range of temperatures. The melting points of −69.6 to −0.36°C and −64.7 to 20.8°C were observed for red and pink salmon oils, respectively. The enthalpy was 40 j/g for red salmon oil and 39 j/g for pink salmon oil. Specific heat capacity ranges of 0.8 to 1.6 and 1.3 to 2.3 j/g/°C were observed for red and pink salmon oils, respectively. Both salmon oils exhibited Newtonian flow behavior. Red salmon oil required higher magnitudes of energy (kj·mol⁻¹) to flow than pink salmon oil. The viscosity of salmon oils was temperature-dependent and could be predicted by the Arrhenius equation.     

Experimental investigation of particle contact time at the wall of gas fluidized beds

The contact time of particles at the walls of gas fluidized beds has been studied using a radioactive particle tracking technique to monitor the position of a radioactive tracer. The solids used were sand or FCC particles fluidized by air at room temperature and atmospheric pressure at various superficial velocities, covering both bubbling and turbulent regimes of fluidization. Based on the analysis of tracer positions, the motion of individual particles near the walls of the fluidized bed was studied. The contact time, contact distance and contact frequency of the particles at the wall were evaluated from these experimental data. It was found that in a bed of sand particles, the mean wall contact time of the fluidized bed of sand particles decreases by increasing the gas velocity in the bubbling and increases in the turbulent fluidization. In other words, the particle-wall contact time is minimum at the onset of turbulent fluidization in the bed of sand particles. However, the mean wall contact time is almost constant in both regimes of fluidization in the bed of FCC particles. All the existing models in the literature predict a decreasing contact time when the gas velocity in the bed is increased. It was also shown that the contact distance increases monotonously by increasing the gas velocity in the bed of sand particles, while it is almost constant for the bed of FCC particles. Contact frequency has a trend similar to that of the contact time for both sand and FCC particles.