Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

Recrystallization/precipitation behaviour in microalloyed steels

Microalloyed high-strength low-alloy (HSLA) steels contain additions of Nb, V, Ti, or in combination, in amounts of 0.01 to 0.1 weight percent to improve mechanical properties, which are strongly dependent on the thermomechanical interaction taking place in the course of rolling mill processes. The recrystallizatian of hat-twisted austenite has been investigated in a cylindrical specimen (f 6×50 mm) machined from hat rolled plates of 0,052 wt % Niobium microalloyed steel. Continuous and interrupted torsion test were carried out in the temperature range 1123 K to 1173 K after a solution treatment of 1.5 minutes at 1423 K and torque-twist data were analysed. The various methods were discussed for obtaining results from torsion tests. The effect of precipitation kinetics was appreciated by way of connection t_p/t_p(red), where t_p is the experimental measured time for the peak stress and t_p(red) is the newly defined reduced time. The softening ratio X and time t_0.05R for start of static recrystallization were established.

The correlation between precipitation and recrystallization is presented as a graphs for chosen requirements (temperature of austenitization, carbon and niobium content and strain rate). If temperature goes below 850°C, the restoration processes are hardly suppressed, both are limited by diffusion and Nb(CN) precipitation, which are extended dynamically in the range of strains rates 10⁻² to 1 s⁻¹.

In the present paper, an attempt is made to derive the PRTT diagram and to define all mathematical equations for describing recrystallization times t_0.05R, t_0.5R, t_0.95R and t_0.05P for the start of precipitation. In real metal forming processes such as the hot rolling of plates or strips the knowledge of these parameters and results is extremely important for the the correct microstructure and sheet quality to be obtained.     

Influence of influent tributaries on water quality changes in Lake Mogan, Turkey

Lake Mogan, located in the steppes of central Anatolia, is a vital Turkish ecological system, in terms of its water resources, flora and fauna. The lake also is a unique recreational area for Ankara, the capital of Turkey. However, the lake is currently threatened by severe pollution, being under the risk of serious degradation because of (i) uncontrolled urbanization; (ii) point and non‐point source pollution; (iii) inefficient sewerage systems; (iv) sediment transportation and pollution via influent creeks to the lake; (v) uncontrolled soil erosion in its drainage basin; (vi) inappropriate flood control measures; and (vii) severe degradation of the natural wetlands within its drainage basin. This study evaluates the influence of its influent creeks on the water quality of Lake Mogan, mainly because the creeks are believed to be responsible for the major pollutant load reaching the lake, and because the extensive database documenting this situation has not previously been critically evaluated. Accordingly, this study reviews (i) change in the water quality of Lake Mogan between 1993 and 2002; (ii) the water quality classification of the major influent creeks feeding Lake Mogan; and (iii) the influence of the influent creeks on the water quality of the lake between 1993 and 2004.     

新疆重质混合原油研制高等级道路沥青

对利用新疆重质混合原油生产的减压渣油作为基质沥青制备高等级道路沥青进行了研究。考察了低硫石蜡基原油（A）和含硫环烷-中间基原油（B）的掺炼比对基质沥青四组分组成的影响，减压渣油软化点与基质沥青四组分组成的关系，以及添加剂对改进沥青性质的作用。由此得出原油（B）的合适掺炼量，减压渣油软化点的控制范围和优化的生产工艺条件，调合出了符合GB／T18150—2000和JTGF40—2004要求的高等级道路沥青。     

Measurement of the Metal Surface Acidity/Electronegativity of Pt(110)

In previous work, it has been found that a hydrogen-covered Pt(110) surface is acidic, but quantification of the acidity has not yet been done. In this paper a spectroscopic method is developed to measure the acidity of a metal surface for the first time. The technique involves measuring the intensity of the N–H stretch from the C₅H₄XNH⁺ that forms when hydrogen coadsorbs with pyridine, 2-fluoropyridine and 3-fluoropyridine. The Bethe approximation is then used to estimate the metal surface acidity/electronegativity (MSAEL). The proton affinity/MSAEL of Pt(110) has been determined to be 907 ± 4 kJ/mol at high coverage. This is the first time the MSAEL has been measured on a metal surface. Implications for fuel cell catalysis are discussed.     

水生生物环境诊断(AOD)技术应用研究

介绍一种新型的毒性试验方法——水生生物环境诊断(AOD)技术，该方法将冷冻浓缩和生物测试技术有机地相结合，较好地解决了低毒性水体的毒性测试问题。应用本项技术以红鳍鱼为受试生物，分别对湖北武汉马伧湖、墨水湖、广东深圳河、长江干流寸滩等几个断面、丹江口水库白河、丹江河口、老灌河等不同水体进行AOD测试，所得48hr-LC\-50结果与实际水质状况基本相符。     

科学焚烧垃圾系统的技术特点

科学焚烧处理垃圾法具有占地少,场地易选择,时间短,减量化显著,无害化彻底以及回收余热供发电供热等优点.其处理设备和控制系统是保证科学焚烧处理垃圾成功,并带来巨大经济效益的关键.鉴于此,文章对科学焚烧垃圾系统设计作了比较详细的介绍.     

Applying real options in investment decisions relating to environmental pollution

This study focuses on how to assess the optimal environmental investment decisions under economic and ecological uncertainty, and establishes the continuous time model using the real option approach to optimize environmental pollution policy. Unlike traditional cost benefit analysis, this work extends the model of [Pindyck, R.S., 2002. Optimal timing problems in environmental economics. Journal of Economic Dynamics and Control 26(9–10), 1677–1697], and attempts to identify the storage threshold of pollution stocks and the optimal timing for implementing environmental pollution decisions.     

锌基合金模具的应用及探讨

本文分析了锌基合金模具制造及使用过程中容易出现热裂、翘曲、收缩的问题，并提出了解决这些问题的措施。