（Ba1-xSrx）（Zn1/3Nb2/3）O3微波介质陶瓷温度系数的异常

研究了（Ba1-xSrx）（Zn1/3Nb2/3）O3微波介质陶瓷温度系数的非线性变化以及异常的原因。根据CM公式，随着系统中Sr（Zn1/3Nb2/3）O3的增多，τc的异常是由于氧八面体的畸变导致的相转变（对称性降低）所造成的（晶体结构由无序立方相向有序赝立方相的连续变化）。相转变的发生相应影响了极化以及极化模式，这是造成τc异常的根本原因。     

利用测井资料预测塔河油田地层破裂压力

针对塔河油田奥陶系碳酸盐岩油藏 ,介绍了地层破裂压力预测和地层裂缝高度预测的基本原理 ,选择了塔河油田 4口井的资料进行了破裂压力和裂缝高度预测的成果处理。为塔河油田奥陶系碳酸盐岩储层改造提供了较为可靠的施工参数     

矿用立式旋风水膜除尘器除尘性能的试验研究

本文通过对立式旋风水膜除尘器除尘性能的模型试验,揭示了几个主要参数对其除尘性能的影响,确定了合理的取值范围,对该种除尘器的设计和应用提供了依据。     

电磁铸造液柱高度数学模型的建立及应用

为了研究熔体金属电磁立柱成形能力并计算电磁作用下的液注高度,从电磁铸造立柱成形的基本原理出发,建立了电磁场作用下金属立柱成形时液柱高度数学模型,并试验验证了模型的准确性.利用液柱高度数学模型对铝、钢、锡铅合金等金属的电磁铸造可行性,以及电力参数对液柱高度的影响进行研究.结果表明:铝电磁无模成形能力最强,而钢及锡铅合金电磁无模成形能力则基本相同;钢及锡铅合金电磁立柱成形所需的磁感强度约为0.08～0.10 T,而铝则只需约0.04T.     

9．5－32mm波段大气衰减随仰角变化的实验研究

在实测和分析３２、１４．６、１２．５和９．５ｍｍ波段大气衰减的基础上，研究了大气衰减随仰角变化的规律；讨论了仰角为３～９０°时计算大气衰减的简化计算公式；给出了大气等效高度与地面水汽密度的关系式，对大气衰减和等效高度的实测值与理论值进行了比较和分析．     

Schottky barrier heights of contact metals to p-type ZnSe

Schottky barrier heights (SBHs) of a variety of metals (In, Cd, Nb, Ti, W, Cu, Ag, Au, Ni, Pt, and Se) contacting to p-ZnSe grown by a molecular beam epitaxy method were determined by analyzing capacitance-voltage (C-V) and/or current density-voltage (J-V) curves. The SBH values of the Au and Ni contacts were determined from intersections of straight lines of the C⁻²-V curves to be 1.23 and 1.13 eV, respectively. The J-V calculations provided a large SBH value of 1.2 ± 0.1 eV for a variety of metals, indicating that the Fermi-level could be pinned at the contact interface. Reduction of the SBH values to a level lower than 0.4 eV and/or increase of doping concentrations to a level higher than 10²⁰ cm⁻³ are essential to obtain an ohmic contact with contact resistivity of around 10⁻³ Ω·cm².     

Paste Residence Time in a Spouted Bed Dryer. II: Effect of Spout Operational Conditions

Residence time distributions for an aqueous solution of 10% sodium chloride in a spouted bed dryer of inert particles were determined using the stimulus-response technique. Glass and polyethylene beads with diameters 2.6 and 3.4 mm were used as inert bodies in a cylindrical column of 14.0 cm diameter and 60° conical base. The effects of inert bodies load, air, and paste flow rates on the mean residence times and RTD were determined following 2³ factorial designs. The RTD could be correlated to the perfect mixing cell model with R² varying from 0.8684 to 0.9815. The mean residence times in CSBD varied from 10.8 to 13.9 and 10.7 to 13.3 min for glass and polyethylene beads, respectively. For both inert particles, mean residence times increased with bed height and decreased with paste feed rates. Also, terms of interaction among the factors were significant in some cases, showing a complex behavior of paste residence times. Equations obtained by response surface regression could predict mean residence times on glass and polyethylene beads with deviations lower than ±10%.     

部分可渗透直立圆柱的消波作用研究

本文导出了线性波浪作用于上部可渗透的直立刚性圆柱体上的水动力的解析解。在线性有势流的假定下，用特征函数展开方法求出了内部和外部流场的解。给出了不同波浪要素及结构尺寸参数下的数值结果。由结果可知，提高可渗透性可以有效消减波幅。     

全密封变压器用波纹油箱的波纹高计算

介绍了全密封变压器所用的液纹油相的波纹筋高的计算方法，并用试验进行了验证。     

东濮凹陷低阻油层成因研究

针对东濮凹陷低阻油层的测井曲线显示特征，从岩石物理特性、油藏高度、泥质砂岩阳离子交换、换井滤液侵入和导电矿物影响等几个方面系统地进行了低阻油层成因研究。研究结果表明，东濮凹陷伏阻油层的形成是多种因素共同作用的结果，但骨架颗粒岩性细、泥质含量偏重、地层水矿化度高，油藏高度低是形成东濮凹陷低阻油层的主要因素。