高灵敏度热释电摄象管红外电视系统

针对热释电摄象管(PEV)在传统的对称斩波模式下存在的各种问题,设计了一种新的非对称斩波模式PEV红外电视系统.通过提高PEV摄象机的温度响应率R_i和采用高去噪声信号处理系统,大大改善了PEV红外成象系统的性能.     

油田开发经济运行质量研究与应用

提出了油田开发经济运行质量的研究方法和技术思路。对胜利油区几种典型的油藏类型进行了经济运行质量评价。以老河口油田桩106块为例，提出了提高油田经济运行质量的三条基本途径，取得了较好的实际应用效果。     

RH-KTB耐材长寿技术研究及应用

介绍了宝钢RH-KTB工艺条件下RH用镁铬砖的应用和提高浸渍管管龄、下部槽槽龄的方法.     

深井重泥浆弱凝胶工艺技术初探

重泥浆强凝胶体系对钴井会产生不利影响。笔者结合川东地区的实际情况,分析了重泥浆强凝胶形成的原因和重泥浆弱凝胶的形成机制,提出了形成重泥浆弱凝胶体系的核心和设计原则,总结出了一套以正确使用泥浆添加剂并配合强有力的固控措施为主的成套深井重泥浆弱凝胶工艺技术,介绍了这套技术在川东地区的应用情况。实践证明,少用甚至不用泥浆降粘剂就可获得并维持尽可能低的静切力,使τ_s,10s为0.5—6Pα、τ_s,10min为2—12.5Pα。     

Bulk modification of styrene–butadiene–styrene triblock copolymer with maleic anhydride

The bulk modification of SBS rubber with maleic anhydride in a mixing chamber of a Haake rheomixer was studied. The effect of temperature, maleic anhydride, and benzoyl peroxide concentrations on the grafting efficiency was evaluated. High grafting efficiency was achieved when the ratio of peroxide and maleic anhydride concentration was high. On the other hand, on this condition high insoluble fraction was generated. The addition of a diamine, 4,4′‐diaminediphenylmethane to the reaction mixture minimizes the amount of insoluble polymer. However, the grafted MAH content also decreases. The graft copolymer was characterized by infrared spectroscopy and the grafting extension was determined by titration. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2953–2960, 2002; DOI 10.1002/app.10355     

精轧油膜轴承密封失效机理的初步分析

对油膜轴承密封出现的进水、漏油现象作了大量的调查、测量和统计分析，找出了产生质量事故的根本原因，提出了解决措施。     

岳城水库供水工程贴边岔管设计

岳城水库供水工程， 邯郸、安阳两城市引水岔管均采用内、外贴边补强板型式对取水口进行局部加强。此补强方法对水流流态干扰较少， 水头损失小。设置这样的岔管对原电站压力钢管结构改动较小， 构造相对简单， 制作与安装方便， 对岳城水库供水这样的改建工程较为适用。     

红外热成象技术在股骨头坏死疾病针刺疗法中的应用

红外热成象技术可以有效地用于股骨头坏死疾病的诊断和针刺治疗效果的评价，效果优于其它常规方法。     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

红外光控器在蜜丸包装机上的应用

中药大蜜丸及所用包装材料软、粘、轻、小、光,较难实现机械化自动包装。通常的监控方法不适合蜜丸的自动包装。采用红外线光电控制器,解决了自动包装蜜丸时出现的瞬间无纸、无丸等自动控制。