Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties

A series of high nitrogen austenitic stainless steels were successfully developed with a pressurized electroslag remelting furnace. Nitride additives and deoxidizer were packed into the stainless steel pipes, and then the stainless steel pipes were welded on the surface of an electrode with low nitrogen content to prepare a compound electrode. Using Si3N4 as a nitrogen alloying source, the silicon contents in the ingots were prone to be out of the specification range, the electric current fluctuated greatly...     

Oxidation behavior of in-situ Al2O3/TiAl composites at 900℃ in static air

In-situ Al2O3/TiAl composites were successfully synthesized from the starting powders of Ti, Al, TiO2 and Nb2O5. The oxidation behavior of the composites at 900℃ in static air was investigated. The results indicate that the composite samples present a much lower oxidation mass gain. Under long-time intensive oxidation exposure, the formed oxide scale is multi-layer. The formation of the outer TiO2 layer is fine and dense, the internal Al2O3 scale has good adhesiveness with the outer TiO2 scale, and the TiO2+Al2O3 mixed layer forming the protective oxide scale is favorable for the improvement of oxidation resistance. It is believed that the incorporation of Al2O3 particulates into the metal matrix decreases the coefficient of thermal expansion of the substrate, and forms a local three-dimensional network structure that can hold the oxide scale. The formation of the oxide scale with fmer particle size, stronger adherence, less micro-defects and slower growth rate can contribute to the improvement of oxidation resistance. Nb element plays an important role in reducing the internal oxidation action of the materials, restraining the growth of TiO2 crystals andpromoting thc stable formation of the Al 2O3-riched layer,which is benfeicial to improve the oxidation properties.     

Formation mechanism of aerodynamic drag of high-speed train and some reduction measures

Aerodynamic drag is proportional to the square of speed. With the increase of the speed of train, aerodynamic drag plays an important role for high-speed train. Thus, the reduction of aerodynamic drag and energy consumption of high-speed train is one of the essential issues for the development of the desirable train system. Aerodynamic drag on the traveling train is divided into pressure drag and friction one. Pressure drag of train is the force caused by the pressure distribution on the train along the reverse running direction. Friction drag of train is the sum of shear stress, which is the reverse direction of train running direction. In order to reduce the aerodynamic drag, adopting streamline shape of train is the most effective measure. The velocity of the train is related to its length and shape. The outer wind shields can reduce train’s air drag by about 15%. At the same time, the train with bottom cover can reduce the air drag by about 50%, compared with the train without bottom plate or skirt structure. Foundation item: Project(2001AA505000) supported by the National High-Tech Research and Development of China     

Surface wear resistance properties of Ta＋N implanted W18Cr4V high speed steel

High-speed steel W18Cr4V is commonly used in industries such as blade and mould manufacturers because of its high level of hardness and toughness, red-hardness and resistance. Ion implantation is an effective method to improve the wear resis-tance of W18Cr4V. In our investigation, Ta and Ta+N ion implantation was performed on W18Cr4V high-speed steel. The surface properties after implantation were evaluated by measuring friction coefficients while the carbonyl phase of the surface was ana-lyzed by X-ray diffraction analysis. It was found that the friction coefficients of the treated samples were much lower. Samples implanted with Ta+N had a lower friction coefficients than samples implanted only with Ta. This can be attributed to the formation of a new chemical compound, Fe7Ta3, on both surfaces. An even harder chemical compound, Fe2N, was formed on both sttrfaces of Ta+N implanted samples.     

基于图像的静脉输液无液检测的新方法

针对国内外为实现静脉输液无液自动检测而采用的各种传感器技术存在的各种问题,提出基于图像的静脉输液无液检测的新方法.通过CCD摄像机采集输液器液位图像,数字化后输入计算机,由计算机软件进行图像处理和分析,得到输液器是否无液的信息.该方法的研究,实现了将数字图像处理技术融合到静脉输液无液检测应用中,丰富了图像处理内容的同时为静脉输液无液检测提供了新思路.     

青岛财富中心超限高层Pushover分析

青岛财富大厦是一座复杂的超限高层建筑.设计除利用SATWE程序及ETABS和ANSYS有限元分析程序进行弹性和弹塑性计算分析外,还对结构进行了静力弹塑性分析（Pushover Analysis）.研究表明：静力弹塑性分析方法在超限高层结构设计中,由于受高振型的影响,虽然理论上会存在一定的误差,但是通过Pushover分析可以从宏观上发现结构在罕遇地震作用下的破坏机制,从而对可能存在的薄弱部位进行有针对性的加强,提高结构可靠度.     

VSC—HVDC系统的控制策略及其仿真研究

建立了VSC-HVDC系统的数学模型,基于鲁棒控制理论,将系统对VSC-HVDC的控制目标转化为对其交流侧有功和无功电流的控制来实现,并进行了控制方案设计．仿真实验表明所设计的控制器能够快速反应达到预定的指令目标,具有良好的鲁棒性．     

高含硫气藏中元素硫沉积形态和微观分布研究

元素硫沉积是高含硫气藏开采过程中存在而又必须解决的难题之一.随着高含硫气藏储层压力不断下降,元素硫溶解度也不断下降,一旦元素硫溶解度低于元素硫含量,元素硫就会从地层中沉积下来.沉积的元素硫会堵塞地层孔隙,降低渗透率,严重影响气井产能.为了研究元素硫在地层中的沉积形态和沉积特征,利用自主设计的实验流程和实验方法,使TD5-1井高含硫气体通过岩芯,并降低压力让元素硫在岩芯中沉积下来,然后对沉积了元素硫的岩芯进行电镜扫描和能谱分析,首次得到了元素硫在岩芯中的沉积形态,即元素硫主要以膜状形式分布在岩芯孔隙壁面上.该研究结果为深入认识、掌握元素硫沉积规律以及指导高含硫气藏合理开发奠定了基础.