热带钢连轧机工作辊温度场和热凸度预报模型

采用一种具有较高精度的样条有限条法对轧制过程中工作辊的温度场和热凸度进行计算和预报。结果证明，该模型理论计算值与现场实测值吻合较好，可以较准确地计算和预报热带钢连轧机工作辊的热凸度。     

铝镁碳砖中三氧化二铝的测定

探讨了试样先灼烧除碳，再加混合熔剂副熔，盐酸溶液中浸取，采取氟盐置换法，测定铝镁碳砖中三氧化二铝，终点易于判断，结果令人满意。     

利用非线性自适应技术检测微弱的瞬时信号

本文根据局部流形理论,提出了一类非线性自适应预测滤波模型。仿真结果显示,本文提出的自适应预测滤波模型具有很强的非线性近似能力,可以检测淹没在超混沌或杂波环境中的瞬时信号。     

特低渗透油藏驱替及开采特征的影响因素

应用非达西渗流理论和非线性弹性渗流理论，分析了影响特低渗透油藏驱替及开采特征的主要因素。研究结果表明，启动压力梯度和毛细管压力是影响特低渗透油藏驱替特征的主要因素；而影响特低渗透油藏开采特征的主要因素是储层的弹塑性，即储层的压力敏感性。在特低渗透油藏的开发中应适当缩小注采井距提高驱替压力梯度，采取整体压裂措施减小启动压力梯度，通过气驱或活性水驱油减小毛细管压力，及时补充地层能量以减少压力敏感性对储层的伤害。     

Accuracy of teacher judgments in predicting oral reading fluency.

The relationship between teachers' judgments versus actual performance on curriculum-based measures in reading was examined. A total of 30 regular education teachers were asked to predict the oral reading fluency score of students along with a rating scale of reading subskills. Correlations between teacher judgment measures and student performance found that teachers were accurate reporters of student performance levels in reading. However, some questions were raised whether teachers were accurate at predicting the actual level of student oral reading fluency when effect sizes were used to compare teacher judgment and actual student performance. Recommendations for continued research in understanding the parameters of the accuracy of teacher judgment are made. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Structural integrity in electronics

With continuing miniaturisation, increased performance demands and the requirement to remove lead from solder alloys, the challenges to structural integrity and reliability of electronic equipment are substantial and increasing. This paper outlines typical features in electronic equipment of which the structural integrity community may be generally unaware. Potential failure modes in service are described, and the problems of scale and material characteristics are considered. Progress in the application of fracture mechanics to the life prediction of interconnections is reviewed. The limited evidence available suggests that the crack growth resistance of silver‐containing lead‐free solders is superior to that of the traditional Sn‐37Pb under cycle‐controlled conditions but there is no difference when time‐dependent conditions prevail. In several respects, it is contended that the electronics sector is faced with challenges at least equivalent to those encountered in gas turbines and nuclear power generation.     

Bayesian and Dempster-Shafer fusion

The Kalman Filter is traditionally viewed as a prediction-correction filtering algorithm. In this work we show that it can be viewed as a Bayesian fusion algorithm and derive it using Bayesian arguments. We begin with an outline of Bayes theory, using it to discuss well-known quantities such as priors, likelihood and posteriors, and we provide the basic Bayesian fusion equation. We derive the Kalman Filter from this equation using a novel method to evaluate the Chapman-Kolmogorov prediction integral. We then use the theory to fuse data from multiple sensors. Vying with this approach is the Dempster-Shafer theory, which deals with measures of “belief”, and is based on the nonclassical idea of “mass” as opposed to probability. Although these two measures look very similar, there are some differences. We point them out through outlining the ideas of the Dempster-Shafer theory and presenting the basic Dempster-Shafer fusion equation. Finally we compare the two methods, and discuss the relative merits and demerits using an illustrative example.     

Numerical modelling for scattering of waves in three-dimensional cracked material

In this paper, a mathematical model is proposed for the problem of the scattering of plane waves in a three-dimensional cracked materials. Instead of obtaining closed-form solutions as in conventional theoretical analysis methods, this approach, called the Equivalent Nodal Force (ENF) method formulates the mechanical effects of cracks as an equivalent nodal force in a numerical procedure, and physically translates cracked material into an equivalent continuous one. Several mechanical relations between waves and cracks are evident from this method. Also the results of several numerical calculations are presented and these are compared with those obtained by the conventional methods.     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。