多年冻土区低导热沥青混合料设计与试验研究

为降低多年冻土区沥青路面吸热传导引起的冻土融沉病害,采用在沥青混合料中填加低导热材料的方法来改变集料导热系数从而降低沥青混合料导热系数.确定沥青混合料的最佳油石比后,在不改变AC-13沥青混合料矿料级配的条件下进行低导热沥青混合料配合比设计,用填加的生蛭石粉(ZS)将原矿料级配中2.36 mm以下各档材料进行等质量替代,以保证基本力学性能.采用TCI热物性分析仪对ZS掺量(质量分数,下同)分别为0％,4％,6％,8％及10％的沥青混合料试件进行导热系数的测试.结果表明:沥青混合料试件导热系数随ZS掺量的增加,总体呈指数函数递减趋势;ZS掺量为10％的试件导热系数比未掺ZS试件降低了46.27％,降幅最大,且各项路用性能指标均满足规范要求.     

A common network flow formulation for several civil engineering problems

This paper discusses a common network flow problem that arises in four areas of civil engineering. The problem is one of identifying arc flows that simultaneously satisfy the circuit and node law constraints for a given network. Applications and computational procedures in the areas of elastic structural analysis, hydraulic network analysis, traffic equilibrium and construction task scheduling are described. The interpretation of decision variables and mathematical functions will vary depending on the application, but the general priblem formulation and solution technique for each application remains essentially unchanged. Analogies between the different applications may enhance the conceptual understanding and intuition of engineers working in each area.     

Application of hydraulic modelling to control intrusion into potable water pipelines

A key objective of water supply systems is to provide potable water to consumers at an appropriate quality, however, through distribution networks, water quality can be compromised. One of the avenues through which this can happen is contaminant intrusion into the network. Through hydraulic modelling, this paper examines how potential intrusion into water distribution networks can be established and also predicts the magnitude of intrusion that is expected to occur, given particular conditions. The paper further suggests possible preventive measures that can be taken in order to avert the occurrence of this phenomenon. Results indicate that for potable water pipelines flowing through high pressure areas, if the pressure of the surrounding environment can be established then by ensuring that network pressures are above the surrounding pressures in those sections of the network, intrusion can be overcome.     

Hydrodynamic characteristics of a new permeable pavement material produced from recycled concrete and organic matter

The aim of the present study was to evaluate the hydrodynamic characteristics of a new material to be used for permeable and purifying pavements in urban areas. The new material is a mixture of crushed concrete, to provide structural support, and a compost mix intended to retain and biologically treat stormwater pollutants. The first part of this study was to evaluate the hydraulic conductivity of the material at different mixing ratios to define the range of materials suitable for urban drainage applications. The second part of the study involved using tracing experiments to quantify the effects of the pollutant transport mechanisms occurring during the water infiltration process. These experiments were conducted under steady state flows condition using a conservative tracer (NaCl). The results demonstrate that while the addition of compost significantly reduced the permeability of the concrete mix, it was still suitable for use as a paving material in an urban environment. The increased residence time of the stormwater pollutants due to the addition of the compost mix was shown to have a positive effect on the biological treatment of the stormwater pollution.     

Water exchange effect on eutrophication in landscape water body supplemented by treated wastewater

Artificial landscape water bodies filled by treated wastewater pose a risk of developing algal blooms due to high nutrient levels of treated wastewater. In this study, water exchange experiments were conducted using treated wastewater in an artificial landscape pond, and a eutrophication model was calibrated and applied to evaluate the effects of water exchange on algae growth in the pond. The results indicate that the joint dilution process and nutrient supply process of water exchange initially cause the algae level to rise and then rapidly decline as the hydraulic resident time (HRT) decreases, and HRT has a critical point at which the pond faces the highest risk of algal bloom. The study also indicates that phosphorus (instead of nitrogen) is the primary limiting factor of algae growth. Therefore, the critical HRT should be avoided and phosphorus is the target pollutant to be controlled in landscape pond water management.     

斜坡式水工护岸强夯效果分析

通过重型动力触探试验,对斜坡式水工护岸进行强夯效果检测,测定了水工护岸土体不同深度的锤击数,得到了土体的密实度,初步对土体进行了力学分层,并分析了潮位对强夯效果的影响,探讨了在高潮位时强夯在土体中的影响深度,以供参考.     

Restoration of saline greenhouse soil and its effect on crop’s growth through in situ field-scale electrokinetic technology

An in situ electrokinetic (EK) system was designed and applied to highly saline greenhouse soil with a view to investigating the effects of the EK process on growing crops. In situ EK tests in field scale were conducted on the salt accumulated lands in the greenhouse where cabbages and lettuces were being cultivated. A voltage gradient of 0.25–0.6 V cm^?1 was applied for 50 days in the cultivated lands. The changes in the process, viz. current, voltage, and soil temperatures, were monitored. After the EK process, the initial electrical conductivity (EC, 6.0 dS m^?1) of the soil was reduced to about 1.7 dS m^?1 homogeneously below the recommended value (2.5 dS m^?1). The growth rate of cabbages and lettuces under EK treatment was about twice higher than those in the untreated area. The present study revealed that the EK process encourages the growth of the crops considerably and also removes the salts in the soil efficiently during the growth of the crops.     

间位芳纶溶解及凝固性能研究

以二甲基乙酰胺(DMAc)、二甲基甲酰胺(DMF)、二甲基亚砜(DMSO)、1-甲基-2-吡咯烷酮(NMP)为溶剂,分别加入LiCl和CaCl_2制备溶解体系,研究了间位芳纶在这几种溶解体系中的溶解性能。再以H_2O-DMAc、H_2O-DMF、H_2O-DMSO、H_2O-NMP为凝固浴,研究了溶剂种类、芳纶溶液质量分数、离子浓度等对间位芳纶溶液的凝固性能的影响。结果显示:Li Cl-DMAc溶解体系具有更强的溶解性能;凝固值随凝固浴中凝固剂H_2O的含量的增加不断减小,而临界浓度几乎没有变化;随着凝固浴温度的增加,凝固值增大,临界浓度减小;凝固值随凝固浴中离子浓度的升高而增大,但临界质量分数则不断降低。另外,间位芳纶溶液的扩散系数随着凝固浴中H_2O的含量的减少不断减小,随着芳纶浓度的增加不断减小。     

High Li-ion conductivity of Al-doped Li7La3Zr2O12 synthesized by solid-state reaction

Li₇La₃Zr₂O₁₂ (LLZO) has cubic garnet type structure and is a promising solid electrolyte for next-generation Li-ion batteries. In this work, Al-doped LLZO was prepared via conventional solid-state reaction. The effects of sintering temperature and Al doping content on the structure and Li-ion conductivity of LLZO were investigated. The phase composition of the products was confirmed to be cubic LLZO via XRD. The morphology and chemical composition of calcined powders were investigated with SEM, EDS, and TEM. The Li-ion conductivity was measured by AC impedance. The results indicated the optimum sintering temperature range is 800–950 °C, the appropriate molar ratio of LiOH·H₂O, La(OH)₃, ZrO₂ and Al₂O₃ is 7.7:3:2:(0.2–0.4), and the Li-ion conductivity of LLZO sintered at 900 °C with 0.3 mol of Al-doped was 2.11×10⁻⁴ S cm⁻¹ at 25 °C.     

深水油气田电液复合式水下分配单元设计

分析了电液复合式水下分配单元的基本构成与功能。为提供多个水下设备的阀门执行器同时动作所需的液压动力,提出液压分配单元的管路结构优化设计方案,并对其流动情况进行了模拟仿真验证。提出以光功率分配器为核心的电气分配单元设计方案,建立基于光功率分配器的下行控制信号传输模型,并采用Optisystem软件模拟验证了其可行性。