轧机锁紧油缸泄漏原因分析及系统改进

济钢第一小型轧钢厂轧机液压换槽系统因工作压力增高，蓄能器压力油长期作用于锁紧缸，引起密封圈击穿、泄漏和机架不稳。通过增设定值减压阀控制油压，改进锁紧油缸结构，解决了锁紧油缸的泄漏问题，保证了轧制线的稳定，轧机作业率由85％提高到87％。     

微型液压钻的应用

介绍国外在特殊场所采用的先进钻孔技术的微型液压钻。它具有可手控的永久磁性基座、独特的刀具结构、有效的火花控制和极大的便携性,适用于特殊环境下的钻孔作业。     

考虑介质变形和长期导流能力的裂缝性气藏压裂产能模拟研究

在气藏开采过程中，由于孔隙压力的不断降低，使得介质变形而导致渗透率的变化，进而影响井的产量。针对这一问题，提出了各种流体与固体耦合的数值模拟模型。然而，对于裂缝性储层和多相渗流问题，流固耦合模型中许多参数不易获取，且求解难度很大，使得耦合模型存在一定的应用局限性。很少有文献在气井产能模拟时将介质变形和就地的长期导流能力加以综合考虑。文章考虑介质变形引起的天然裂缝渗透率的变化和裂缝导流能力随时间递减的影响，建立了裂缝性气藏压裂后气水两相渗流数学模型，推导出了数值计算模型；本模型易于编程求解，对于研究裂缝性气藏的渗流特征，特别是进行单井压后产能预测具有一定的实用意义。计算表明：不考虑介质变形和导流能力递减所预测的气产量偏高；目前普遍使用的气藏数值模拟软件中，假定渗透率、裂缝导流能力为常数，以致模拟计算结果比实际偏高。     

新型水力泵排液工艺

酸化或压裂是改造油气层措施中常规的也是最有效的方法之一。问题是酸化或压裂结束后,采取何种工艺及时返排出残酸,减少残液二次沉淀对油层的污染。同时常规TCP(油管传输负压射孔)+DST(地层测试器)二联作测试工艺在遇到低压、低渗等非自喷油层时,要想取准油层产能、压力,收集到有代表性产液样品资料,困难很大。针对以上问题,大港油田钻采院研制了新型水力喷射泵,该泵可与酸化、压裂及射孔+测试等工艺配套使用,在实现一趟施工管柱同时完成几项工作的同时,利用喷射泵深抽、连续强排的技术特点,取得了较好效果。     

水工隧洞内消能工的研究及应用进展

对于高水头、大流量的水电工程,以往的消能工具有一定的局限性,研究表明,把大面积遭受高速水流作用改为局部承受的消能方式,是高坝泄洪消能的一条有效途径。内消能工主要有孔板(洞塞)式消能工、旋流式消能工、消力井等3种形式。实践表明,内消能工对改善大坝下游水流流态,保护下游环境,保障下游边坡稳定等有积极作用,综合考虑,旋流式消能工具有较大优越性。对水工隧洞内部消能技术尚需开展进一步的研究与实践。     

液压启闭机CAD系统研究

简要介绍了在引进支撑环境下独立开发的专用ＣＡＤ系统应用软件－“液压启闭机ＣＡＤ系统”的运行环境、结构特点，主要功能模块的功能、开发过程中碰到的关键技术难点及解决办法。     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

SIMILARITY LAW OF FLUCTUATING PRESSURE WITHIN HYDRAULIC JUMP AREA

Through a series of model tests of five scales for 2-D free hydraulic jump, the da-ta of fluctuating pressure acting on the floor level within the hydraulic jump were obtained. Dur-ing the experiments, Froude number varied from 2.94 to 8.61, and Reynolds number rangedfrom 2×10~4 to 6×10~5. Experiment results indicate that the amplitude scale of fluctuating pres-sure is the length scale of model, i. e. P'=L, which agrees with gravity similarity law: Thefrequency scale of the fluctuating pressure is a unity i. e., f=1, which does not satisfy thegravity similarity law.     

面流消能近底紊动流速特性的研究(面流消能试验研究之一)

本文主要论述了面流消能五种典型流态近底紊动流速特性,总结出了近底时均流速和紊动强度沿程变化规律,提出了近底紊动流速可能出现的最大瞬时值及相应位置的计算公式。面流消能工程的下游防冲设计中考虑的主要水力参数之一是,消能段近底流速紊动可能出现的最大瞬时值及其相应的部位,但目前国内外研究成果较少。笔者通过水工模型试验重点研究了面流消能各典型流态近底流速及其紊动纵向分量沿程的变化规律,并提出了计算公式,为优化面流设计提供科学依据。     

液压胀形轧辊油槽深度的确定

对液压胀形轧辊（即国外的ＶＣ轧辊）辊套热装后的弹性变形进行了有限元分析，给出了确定油槽最小深度的计算公式。本文的有限元计算结果与实验结果吻合，某些结论可为液压胀形轧辊的结构设计提供理论依据。