一种老人医疗求救装置设计与实现

目前,老人医疗装置是当前应用热点之一,引起广泛的关注。本文就该问题提出了一种老人的医疗求救装置的实现方案,详细阐述了该方案设计过程的各个主要模块设计和软件设计。     

酸性低温脉冲化学镀镍磷合金的性能

介绍了低温脉冲化学镀镍的研究工作。结果表明：由于电脉冲的催化作用，使得酸性化学镀镍的施镀温度降低至５０℃时，仍具有１１μｍ／ｈ的沉积速度，镀层磷含量达１０．４８ｗｔ％，结构组织仍为非晶态。其镀层的性能与８０℃施镀的化学镀镀层性能相当。     

The ring transformations of 1,2,3,4-diepoxybutane (2,2′-bioxirane) catalysed by various aluminosilicates

The transformations of a molecule containing two adjacent epoxide rings, 2,2-bioxirane that is, were studied over various acidic aluminosilicates (HZSM-5, HY-FAU, AlMCM-41), for the first time, In the 373–473 K temperature range, in a pulse reactor, a ring-opening–ring-enlargment reaction producing furan only occured over the zeolites and it was the predominant reaction on AlMCM-41 as well. The driving force of this transformation route is water formation via elimination from 2,2-bioxirane. Suprising is the lack of the mono- or dialdehyde, the would-be products of the cleavage of the sterically more hindered C–O bonds – an acid-catalysed reaction typical for alkyl-substituted oxiranes.     

SVPWM在有源滤波器中的应用及仿真研究

有源滤波器控制策略的优劣直接决定其滤除谐波的性能,采用空间矢量脉宽调制技术实现对谐波的调制,并进行仿真验证.仿真结果表明,该算法产生的脉宽指令作为逆变器中各开关器件的通断控制信号,控制的结果能保证补偿电流实时跟踪其指令电流的变化,精确度与准确度均可满足系统要求.     

自升式海洋钻井平台锁紧装置液压系统

针对自升式海洋钻井平台锁紧装置,讨论其构成,对作为驱动装置的液压系统进行设计并作出原理图,运用solidworks和3D Studio Max软件对锁紧装置进行建模仿真.锁紧装置液压系统的设计主要采用比例阀控制的同步回路和用顺序阀的顺序动作回路来分别实现液压缸的同步运动以及顺序动作.     

基于PLC的步进电机转速控制方法研究

概述了PLC控制的优点、步进电机的工作原理。提出了一种基于PLC的四相步进电机控制方法,介绍了系统的硬件组成以及相应的I/O分配。软件设计包括脉冲产生和控制、脉冲分配及步数设定三大模块,用软件完成脉冲分配功能,可以减少硬件资源,控制参数改变方便灵活,提高了系统控制的可靠性和灵活性。     

超宽带传输参考接收机性能分析

在确定超宽带传输参考接收机模型的基础上,分析了基本TR接收机的误码性能,并在AWGN信道下进行了系统建模。仿真分析的结果表明,接收机的性能与脉冲对的重复数Ns、码元的积分时间以及接收机输入噪声带宽的大小之间均有规律可循,其适宜条件：Ns取3～5,标称积分时间等于脉冲宽度,噪声带宽应在保持正常接收时误码率为10-4或更低的水平选取。     

自激多谐振荡器的电路仿真与应用

本文着重介绍了自激多谐振荡器的电路仿真过程。首先阐明了对称的自激多谐振荡器的工作原理;其次应用电路仿真软件Multisim10对自激多谐振荡器进行了简捷的仿真分析;最后以脉冲信号发生器为例说明了自激多谐振荡器的应用问题。     

TH-PPM UWB通信系统多址性能研究

介绍了TH-PPM UWB信号,在AWGN信道和多用户干扰条件下对系统的性能进行了分析,包括误码率分析和系统所能接入的最大用户数,对其误码率进行了仿真.结果表明,随着接入用户数目的增加,系统误码率也增加,而增大重复码长度和脉冲重复时间则可降低系统误码率,但增加脉冲重复时间会降低信息传输速率.     

Constitutive equations and finite element implementation of strain localization in sand deformation

A recently proposed model coupling with the solid-fluid of the saturated sand was utilized to study the deformation band. Based on the critical state plasticity model by Borja and Andrade, the hydraulic conductivity tensor was naturally treated as a function of the spatial discretization matrix about the displacement and the stress field, allowing a more realistic representation of the physical phenomenon. The fully Lagrangian form of the Darcy law was resolved by Piola algorithm, and then the flow law was gained, leading to the implementation of a modified model of the saturated sand. Then the criterion for the onset of localization was derived and utilized to detect instability. The constitutive model was implemented in a finite element program coded by FORTRAN, which was used to predict the formation and development of shear bands in plane strain compression of saturated sand. At last, the formation mechanism of the shear band was discussed. It is shown that the model works well, and the simulation sample bifurcates at 1.18% axial strain, which is in a good qualitative agreement with the experiment. The pore pressure greatly affects the onset and development of the deformation band, and it obviously increases around the localization-prone regions with the direction toward the outer side of the normal of the shear band, while the pore stress flows nearly horizontally and is distributed equally far away the shear band region. Foundation item: Project(2006G007-C) supported by the Foundation of the Science and Technology Section of Ministry of Railway of China; Project(77206) supported by the Excellent PhD Thesis Innovation Foundation of Central South University, China