H ∞ control for discrete‐time nonlinear Markov jump systems with multiplicative noise and sector constraint

This paper addresses the finite horizon H _∞ control problem for a class of discrete‐time nonlinear Markov jump systems with multiplicative noise and nonlinear feedback device. The system nonlinearity occurs in a random way specified by a Bernoulli process, whereas the actuator and sensor nonlinearities are restricted to a sector region. Both the state and the dynamic output feedback H _∞ controllers are devised in terms of difference LMIs. The proposed approach not only allows the resulting system to achieve a prescribed disturbance attenuation level, but also enables the output of actuator/sensor to meet the designated sector condition. Moreover, it is also shown that our approach is well‐adapted for dealing with the discrete‐time Markov jump systems with saturated actuator and sensor. Finally, a backward iterative algorithm is provided to solve the obtained difference LMIs and a numerical example is presented to verify the efficiency of the theoretical results. Copyright © 2013 John Wiley & Sons, Ltd.     

二硝基芘异构体在模拟大气条件下的光化学反应

本文研究了二硝基芘异构体在模拟大气条件下的光化学反应，结果表明反应速率呈二级动力学关系，除光源变化的影响外，二硝基芘异构体在不同气氛中，反应速率不同，存在着氧的猝灭和氧化作用，而不同的异构体之间，相应的反应速度也不同。光解产物中存在硝基羟基类化合物、醌类和二聚体。毒理实验表明，光解产物致突变性下降。     

Experimental Study on the Hydrodynamics and Mass Transfer Characteristics of Ultrasonic Loop Airlift Reactor

The promoting effect of ultrasonic wave on the hydrodynamics and mass transfer characteristics of the loop airlift reactor was studied. The gas holdup, liquid circulation velocity, mixing time and overall volumetric mass transfer coefficient were examined and compared, with and without ultrasonic wave in the reactor. The experimental results show that ultrasound has almost no notable effect on the gas holdup, but has a tendency to decrease gradually the liquid circulation velocity and increase the overall volumetric mass transfer coefficient; and the effect on the mixing time is relatively complex. At low superficial gas velocity, the low powered ultrasound promotes the radial mixing of fluid; with the ultrasonic power increasing, ultrasonic vibration obstructs the axial mixing of fluid. Moreover, the effect of ultrasonic wave on the mixing time gradually decreases with the increase in the superficial gas velocity. Therefore there exists an optimal ultrasonic power for hydrodynamics and mass transfer. Correlations were also proposed for the hydrodynamics and mass transfer characteristics of the reactor.     

基于连续型条件属性的模糊规则约简算法*

针对粗糙集对于连续域属性决策表的处理能力差以及不容易获得模糊集之间关系等问题,提出一种将模糊集和粗糙集结合起来的连续型条件属性模糊规则约简算法。该算法首先引入三角隶属度函数将连续属性值转换为模糊值,并使用离散模糊神经网络方法获得数据集之间关系。实例验证表明,采用该算法,用户可以根据实际决策需要和领域知识更改阈值,从而获得满意的模糊规则结果。     

高温下具有弹性支座钢构件的动力稳定荷载

根据弹性稳定理论原理研究了弹性支座钢构件在高温环境下的动力特性问题,导出了高温下杆件的动力稳定临界荷载计算式,并讨论了保护层厚度、长细比、阻尼、材料特性等因素对杆件动力稳定临界荷载的影响,探讨了在实际工程中如何减小结构失稳的问题,可为钢结构抗火设计提供参考.     

成都粘土预处理垃圾渗滤液中COD的实验研究

在不同实验条件下,以成都长安垃圾填埋场渗滤液为研究对象,利用成都粘土去除垃圾渗滤液中的COD.研究表明,成都粘土对垃圾渗滤液中的COD具有一定的去除效果.在最佳实验条件为用土量85g/L,pH=6.0,搅拌速度150 r/m in,搅拌时间40m in,静止时间12h时,成都粘土对垃圾渗滤液中COD的去除率可达到30%.     

超声波协同超微粉技术辅助酸法提取黑木耳果胶

探讨了超声波协同超微粉技术辅助酸法提取黑木耳果胶的工艺条件。分别考察了超声波辐射强度、液料比、温度、pH值及提取时间等因素对果胶得率的影响,并以此为基础用正交法优化提取黑木耳果胶的工艺参数。结果表明,采用此法从黑木耳中提取果胶的适宜工艺条件为超声波辐射强度70 W/kg、液料质量比40∶1、温度70℃、pH值3.0、提取时间60 mim。在此条件下,木耳果胶得率可达35.45%,与其他方法相比,果胶得率最高。     

基于叠加原理的气体浓度场数值计算方法

以线性偏微分方程叠加原理为基础,介绍了一种数值计算具有复杂边界条件和源项的气体浓度场的新方法.忽略浓度场对速度场的影响,则已知速度场的组分输运方程为线性对流扩散方程,可以应用线性叠加原理.首先将具有复杂边界条件和源项的浓度场问题分解为若干具有简单边界条件和源项的浓度场问题,然后对每个简单浓度场问题做一次数值模拟,获得其数值解,最后通过叠加这些简单浓度场的数值解,就可以求出复杂浓度场问题的解.该方法的应用可以达到减少数值试验数量、节约计算时间的目的.     

Formation of aluminum-magnesium alloy cup by hydrodynamic deep drawing with twin-loading paths

In order to overcome the limitation of hydro-rim deep drawing, a new process of hydrodynamic deep drawing (HDD) with independent radial hydraulic pressure was proposed. By employing the dynamic explicit analytical software ETA/Dynaform5.5 which is based on LS-DYNA3D, the effects of independent radial hydraulic pressure on the stress, strain and the sheet-thickness of aluminum-magnesium cylindrical cup with a hemispherical bottom were analyzed by numerical simulation. The feature of stress distribution is that there exists a stress-dividing circle in the flange, and the radius of dividing circle was determined by theoretical analysis and stimulation. The experimental results indicate that the reasonable match of independent radial hydraulic pressure and liquid chamber pressure can effectively reduce the thinning at the bottom of hemisphere, decrease the radial stress-strain, and improve the drawing limit of aluminum-magnesium alloy cylindrical cup. Funded by the National Natural Science Foundation of China (Nos.50525516, 50875062)     

Orientation of Bi<Subscript>3.2</Subscript>La<Subscript>0.8</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> ferroelectric thin films with different annealing schedules

Fatigue-free Bi_3.2La_0.8Ti₃O₁₂ ferroelectric thin films were successfully prepared on p-Si (100) substrates using metalorganic solution deposition process. The orientation and formation of 5-layers thin films were studied under different processing conditions using XRD. Experimental results indicate that increase in annealing time at 700 °C after preannealing for 10 min at 400 °C can remarkably increase (200)-orientation of the films derived from the precursor solutions with two contents of citric acid. Meanwhile, high content of citric acid increases the film thickness and is conducive to the a-orientation of the films with the preannealing, and low concentration of the solution is conducive to the c-orientation of the films without the preannealing.