A rule-based approach for robust clump splitting

This paper presents a robust rule-based approach for the splitting of binary clumps that are formed by objects of diverse shapes and sizes. First, the deepest boundary pixels, i.e., the concavity pixels in a clump, are detected using a fast and accurate scheme. Next, concavity-based rules are applied to generate the candidate split lines that join pairs of concavity pixels. A figure of merit is used to determine the best split line from the set of candidate lines. Experimental results show that the proposed approach is robust and accurate.     

Stability of large-scale coal-fired MHD channels

Stability of large-scale coal-fired MHD channels is studied by (1) linearized stability analysis, and (2) time-dependent 1-D analysis. The channel length is 15 m with 600 electrode pairs, and the output power ranges from 220.6 MW through 258.7 MW. Linearized stability analyses show that the Faraday channels operated with fixed loading resistance are stable, whereas the two waves of u and u–a (u, a: gas and sound velocity) become unstable in the Faraday channel with fixed loading factor. Two waves of u and u–a are unstable in the diagonal channel with fixed loading current and the u + a wave becomes unstable in the diagonal channel with fixed electrode current. Time-dependent one-dimensional analyses indicate that the Faraday channels with fixed load resistance are smooth without growth of fluctuation. The diagonal channels with fixed electrode current are smooth with no fluctuation, though the linear theory indicates that the u + a wave is unstable. The diagonal channel with fixed load current suffers large disturbance along the latter half of the channel, being consistent with the linearized analysis which indicates that the u - a and u waves are unstable.     

The use of the stable isotope 44Ca in studies of calcium incorporation into dentin

The incorporation into rat incisor dentin of two calcium isotopes, the stable ⁴⁴Ca and the radioactive ⁴⁵Ca, was studied using secondary ion mass spectrometry (SIMS) stepscanning and imaging, and autoradiography, respectively. The results demonstrated a time-dependent incorporation of the calcium isotopes into the mineral phase of dentin. With the SIMS step-scanning, detecting ⁴⁴Ca, the ion yield was high in the odontoblasts 2 min after intravenous injection. After 10 min a marked increase in signal intensity was found at the dentin mineralization front. This result was consistent with those obtained by ⁴⁵Ca autoradiography; a peak of incorporation occurred 10 min after injection of the isotope. Likewise, localization of ⁴⁴Ca to the mineralization front could be demonstrated 10 min after injection by SIMS imaging. In images obtained at earlier intervals, no such increase in ion yield could be detected. The results show that the nonradioactive, stable isotope ⁴⁴Ca can be used as a marker for biomineralization in a similar way to radioactive ⁴⁵Ca.     

万安水利枢纽底孔坝段中隔墙流激振动响应分析

 研究了万安水利枢纽底孔坝段中隔墙在水流脉动壁压作用下的结构随机振动问题，进行了一种泄流工况下的隔墙结构流激振动响应统计量的理论计算，模拟计算了隔墙－水流－基础耦合系统固有频率对流激振动响应的影响，并对水流脉动壁压随机荷载作用下的结构动力可靠度进行了理论分析。     

Exact solution of elasto-plastic stresses in a metal-matrix composite beam of arbitrary orientation subjected to transverse loads

An analytical elasto-plastic stress analysis is presented for a metal-matrix composite beam of arbitrary orientation subjected to a single transverse force applied to the free end of the beam and a uniformly distributed load. The material is assumed to be perfectly plastic in the elasto-plastic solution. A composite consisting of stainless-steel-reinforced aluminum was produced for this work. Sample problems are given for various orientation angles. Elastic, elastoplastic and residual normal and shear stresses are calculated. The location of the elasto-plastic boundary of the beam is obtained according to the x coordinates of the beam.     

容错磁盘阵列的性能模型

本文以排队论为工具，建立了容错磁盘阵列的Ｍ／Ｇ／１排队模型，并在此基础上分析了ＲＡＩＤ的平均响应时间，稳定数据传输率等重要性能指标；比较了同步和异步ＲＡＩＤ的性能差异，最后提出了以吞吐率作为衡量ＲＡＩＤ性能的综合指标，并给出了确定最大吞吐率的定量。     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

热电厂锅炉运行技术指标的微机管理

本文从锅炉运行技术指标台帐微机管理的实际出发，提出了热量计算中主蒸汽流量修正系数Ｃ和给水焓值Ｚ两项参数回归的计算公式，提高了热量计算数值精度。     

应用光度分析法测定铁和渣中的微量镓

用光度分析法测定镓，为适应多种试样的测定，补做了个别条件试验。用该方法测定了铁、渣、浸钒渣等六种不同类型试样中镓的含量，分析其精度精度符合要求。     

A polynomial factorization approach to the discrete time GI/G/1/(N) queue size distribution

The queue of a single server is considered with independent and identically distributed interarrivai and service times and an infinite (GI/G/1) or finite (GI/G/1/N) waiting room. The queue discipline is non-preemptive and independent of the service times.

A discrete time version of the system is analyzed, using a two-component state model at the arrival and departure instants of customers. The equilibrium equations are solved by a polynomial factorization method. The steady state distribution of the queue size is then represented as a linear combination of geometrical series, whose parameters are evaluated by closed formulae depending on the roots of a characteristic polynomial.

Considering modified boundary constraints, systems with finite waiting room or with an exceptional first service in each busy period are included.