阎王鼻子水库生态调度方案分析研究

本文在分析阎王鼻子水库建设前后下游水文情势变化的基础上,根据河道内生态不同需求和不同计算方法,确定水库下游河道基本生态流量和目标生态流量两种需求方案。在充分考虑大凌河流域河道外需水的前提下,研究分析了阎王鼻子水库最大程度满足河道内不同生态需水要求时的调度方案,对改善水库下游河道环境具有一定的指导意义。     

Hybrid function projective synchronization of chaotic systems with uncertain time-varying parameters via Fourier series expansion

In this paper, the hybrid function projective synchronization (HFPS) of different chaotic systems with uncertain periodically time-varying parameters is carried out by Fourier series expansion and adaptive bounding technique. Fourier series expansion is used to deal with uncertain periodically time-varying parameters. Adaptive bounding technique is used to compensate the bound of truncation errors. Using the Lyapunov stability theory, an adaptive control law and six parameter updating laws are constructed to make the states of two different chaotic systems asymptotically synchronized. The control strategy does not need to know the parameters thoroughly if the time-varying parameters are periodical functions. Finally, in order to verify the effectiveness of the proposed scheme, the HFPS between Lorenz system and Chen system is completed successfully by using this scheme.     

Some investigations on fuzzy P + fuzzy I + fuzzy D controller for non-stationary process

The paper addresses the adaptive behaviour of parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller. The parallel FP+FI+FD controller is actually a non-linear adaptive controller whose gain changes continuously with output of the process under control. Two non-stationary processes, whose characteristics change with time, are considered for simulation study. Simulation is performed using software LabVIEW TM . The set-point tracking response of parallel FP+FI+FD is compared with conventional parallel proportional plus integral plus derivative (PID) controller, tuned with the Ziegler-Nichols (Z-N) tuning technique. Simulation results show that conventional PID controller fails to track the set-point and becomes unstable as the process changes its characteristic with time. But the parallel FP+FI+FD controller shows considerably much better set-point tracking response and does not deviate from steady state. Also, a huge spike is observed in the output of PID controller as the reference set-point and process parameters are changed, while the FP+FI+FD controller gives spike free control signal.     

A new time invariant fuzzy time series forecasting method based on particle swarm optimization

In the analysis of time invariant fuzzy time series, fuzzy logic group relationships tables have been generally preferred for determination of fuzzy logic relationships. The reason of this is that it is not need to perform complex matrix operations when these tables are used. On the other hand, when fuzzy logic group relationships tables are exploited, membership values of fuzzy sets are ignored. Thus, in defiance of fuzzy set theory, fuzzy sets’ elements with the highest membership value are only considered. This situation causes information loss and decrease in the explanation power of the model. To deal with these problems, a novel time invariant fuzzy time series forecasting approach is proposed in this study. In the proposed method, membership values in the fuzzy relationship matrix are computed by using particle swarm optimization technique. The method suggested in this study is the first method proposed in the literature in which particle swarm optimization algorithm is used to determine fuzzy relations. In addition, in order to increase forecasting accuracy and make the proposed approach more systematic, the fuzzy c-means clustering method is used for fuzzification of time series in the proposed method. The proposed method is applied to well-known time series to show the forecasting performance of the method. These time series are also analyzed by using some other forecasting methods available in the literature. Then, the results obtained from the proposed method are compared to those produced by the other methods. It is observed that the proposed method gives the most accurate forecasts.     

基于时序特征的发电机转子故障诊断方法

提出了一种利用时序特征进行发电机转子的故障诊断方法.利用时间序列法中的AR或ARMA模型得到的脉冲传递函数的特点,并根据不同故障类别振动信号的格林函数变化的规律性,提出了利用格林函数的统计量特征作为故障诊断的特征参数进行故障诊断的方法.     

基于时间序列模式表示的异常检测算法*

提出了一种基于时间序列的模式表示提取时间序列异常值的异常检测算法(PREOV).时间序列的模式表示本身就具有压缩数据、保持时间序列基本形态的功能,并且具有一定的除噪能力.在时间序列模式表示的基础上提取异常值,可以大大提高算法的效率和准确性,达到事半功倍的效果.在本算法中,还使用了一定的剪枝策略,使得算法的时间复杂度进一步降低.该算法计算简单、实现方便、无须训练,可以支持时间序列的动态增长.     

数控机床热误差的时序分析法建模及其应用

提出了采用时间序列分析法进行机床热误差建模的基本原理及方法,及其在数控机床热误差补偿建模中的应用。利用实测的热误差序列进行时序分析识模、建模和预报。再通过由微机结合机床控制器构成的补偿系统,利用所建立的时序分析模型,经过微机算出补偿值并送入机床控制器对刀架进行附加进给运动完成实时补偿。实验结果表明,可将工件的尺寸变化从原来的25 μm以上降到10 μm以内,大幅度提高了机床的加工精度,从而论证了时序分析法在数控机床热误差建模应用中的可行性与有效性。     

简支深梁用和函数法的级数解答

引用和函数法求解弹性力学平面问题, 对简支深梁受三角形荷载作用时的应力进行了分析,同时给出了该问题的付立叶级数解答,该方法不仅将求解弹性力学的偏微分方程组解耦成非耦联的几个偏微分方程,而且其结果与传统的Airy应力函数得到的解答完全一致, 证明了该方法的正确性和适用性,该方法拓展了将经典的弹性力学解析法用于解决工程实际问题的空间。