水源涵养内涵及估算方法综述

水源涵养和生态系统过程与人类生产生活紧密相关,深入研究水源涵养对维持生态系统健康和人类社会可持续发展至关重要,对促进人与水和谐共生具有指导意义。随着对水源涵养研究与应用的深入,水源涵养内涵逐渐丰富,评估方法愈加多样,但以往的研究中水源涵养定义模糊,缺乏对各种评估方法的综合性对比分析,因此急需明确界定水源涵养内涵,分析各种估算方法的适用性。采用文献分析法系统梳理水源涵养研究历程,将其划分为认识与萌芽期、理论发展期、定量计算和模型综合评估等4个阶段;从定义、水量与功能等3个方面明确界定水源涵养内涵,从原理、时空尺度、适用范围及优缺点方面对已有水源涵养量估算方法进行对比和分析,并展望水源涵养研究的未来发展方向。     

基于关键闸坝优选的区域水网水量调控

为实现区域水网水量的高效调控,从水量、水生态、水质和闸坝管理等4个方面构建包含10个指标的闸坝优选评价指标体系,以廊坊市凤河-永定河区域水网为研究对象,计算区域内32座闸坝的综合关键指数并给出影响程度排序,采用水动力数学模型验证关键闸坝选取的合理性。结果表明：优选出的永丰闸和东张务闸是区域水网的关键闸坝,通过调节这两座闸坝的开度即可满足区域水网的生态需水和防洪排涝调度目标,保持区域水网较优的水力连通能力,提高区域水网水量调控效率。     

妫水河入官厅水库水污染成因及减排措施评估

为保障妫水河入官厅水库入流水质达标,分析水质成因,分步制订水质改善措施。采用MIKE21耦合植物作用的Ecolab生态水质模型,对妫水河下游入官厅水库断面至东大桥断面、支流三里河水域进行模拟。通过对丰水期和枯水期监测数据及模拟结果进行分析,流域上游来流水量及水质、区间污染源及河流湿地等自净作用是影响官厅水库入流水质的主要原因,其中:妫水河入流污染负荷对水库入流水质贡献率最大,丰枯水期氨氮、总磷和总氮的贡献率分别为18.32%～45.76%、9.31%～31.17%和29.34%～67.56%;区间入河污染源氨氮、总磷和总氮削减率分别为19.41%、31.31%和24.94%;丰枯水期河道自净对氨氮、总磷和总氮削减率分别为44.85%～61.29%、51.40%～77.92%和8.40%～23.06%。为改善官厅水库入流水质,在流经城市区的妫水河下游及三里河修建了河流湿地公园,对区域污染源进行截污,使得入库水质可达到Ⅲ类水。为长远确保官厅水库的水质,控制来流水质和加强流域治理是关键,同时营造岸带湿地,对水质改善有积极的作用。研究结果及方法可为水库污染防治及负荷量削减提供理论依据。     

沙颍河流域水资源利用量与经济发展匹配特征

根据沙颍河流域河南段情况确定各地市水资源可利用量,基于数列的匹配度计算方法,对流域内10个地市2014—2018年水资源利用量与经济发展关系进行研究,分析各地市用水量、水资源可利用量与GDP关联程度。结果表明：由于气候条件等因素差异,水资源可利用量差距较大,其中漯河市和周口市单位面积水资源可利用量较多;在研究年限内,各地市水资源可利用量与用水量匹配情况差异较大;在时间维度上,各地市用水量与GDP匹配程度较好,而在空间维度上,开封市匹配情况最差,漯河等城市较好;各地市水资源可利用量与GDP匹配情况存在明显的时空差异。     

A Network Security Risk Assessment Method Based on a B_NAG Model

Computer networks face a variety of cyberattacks. Most network attacks are contagious and destructive, and these types of attacks can be harmful to society and computer network security. Security evaluation is an effective method to solve network security problems. For accurate assessment of the vulnerabilities of computer networks, this paper proposes a network security risk assessment method based on a Bayesian network attack graph (B_NAG) model. First, a new resource attack graph (RAG) and the algorithm E-Loop, which is applied to eliminate loops in the B_NAG, are proposed. Second, to distinguish the confusing relationships between nodes of the attack graph in the conversion process, a related algorithm is proposed to generate the B_NAG model. Finally, to analyze the reachability of paths in B_NAG, the measuring indexs such as node attack complexity and node state transition are defined, and an iterative algorithm for obtaining the probability of reaching the target node is presented. On this basis, the posterior probability of related nodes can be calculated. A simulation environment is set up to evaluate the effectiveness of the B_NAG model. The experimental results indicate that the B_NAG model is realistic and effective in evaluating vulnerabilities of computer networks and can accurately highlight the degree of vulnerability in a chaotic relationship.     

Effect of alloying on stability of grain boundary in γ phase of the U–Mo and U–Nb systems

U–Mo and U–Nb alloys are both extensively used in nuclear industry. γ phase in U–Mo or U–Nb alloy is a solid solution, being metastable in low temperature region. In this work, the effect of alloying on stability of grain boundary in meta-stable γ phase in U–Mo and U–Nb alloys are investigate through first-principles calculations. At first, crystal structure and elastic constants of Mo, Nb and γ-U metals are calculated and the obtain results show the mechanical unstable nature of γ phase at 0 K, no matter with GGA or GGA + U treatment, which agrees with most of the theoretical results in the literature. Furthermore, from the calculated symmetric tilt grain boundary (STGB) formation energies of Σ3[110]/(111) and Σ5[001]/(310) in Mo, Nb, and γ-U, it is found that due to the mechanical unstable character of the γ-U phase, negative GB formation energy is predicted at 0 K for Σ5[001]/(310) if the STGB model is relaxed with all degrees of freedom. Therefore, by using special quasirandom structure (SQS) method, Σ5[001]/(310) and Σ3[110]/(111) STGBs with different solute concentrations in U-rich side in U–Mo and U–Nb systems are further investigated. It is found that, when alloying with Mo or Nb, unlike Σ3[110]/(111), although the fixed-atom constraint is applied, the GB formation energy of Σ5[001]/(310) STGB is becoming negative when the solute concentration is in U-rich side. Only when the concentration of Mo or Nb is larger than 27 at.% or 30 at.%, respectively, or sufficient small, the GB formation energy is becoming positive, suggesting a cooperative effects of solute concentration, unstable character, and grain size on GB structures in γ phase. The predicted different stability of alloyed GB structures at 0 K suggest that although γ phase is metastable at low temperature, its metastability can be controlled through alloying with different solutes, or with different GBs. And grain refinement should be relatively easy in U-rich part than U-poor part of the U–Mo and U–Nb systems.     

基于SPOT-5多光谱影像的矿区塌塘水体提取方法研究

针对基于遥感影像的水体提取方法存在水体提取不完整和误提的现象,提出了一种基于SPOT-5多光谱影像的矿区塌塘水体提取方法。在利用波段合成增加一个可用波段的基础上对已有的水体提取方法进行适当的改进,并基于决策树分类器和改进后的方法进行矿区水体的四级提取,保证了水体提取的完整性,同时减少了误提率;最后利用实测数据对水体提取的精度进行了评定。试验结果表明,基于决策树分类器的水体提取方法具有较高的精度,能满足矿区实际应用的需要。     

煤矿井下高压降尘供水系统监控装置的研制

根据煤矿井下高压降尘系统对供水的要求,研制了一种基于PIC18F4580单片机的井下高压降尘供水系统监控装置,介绍了该装置的硬件和软件设计。该装置可实时监测水箱水位、压力、运行状态,并可将这些保护状态信息通过CAN总线接口和转换单元并入煤矿监测监控网,实现远程监测。实验结果表明,该监控装置达到了设计要求,能保证高压降尘供水系统的实时监测与安全运行。     

矿用柴油机车中新型无源液位传感器设计

针对目前矿用柴油机车液位传感器无法动态调整水箱剩余水位的报警高度、可靠性较差等问题,提出一种新型无源液位传感器的设计方案。该液位传感器采用干簧管和电阻阵列等无源器件,实现了对水箱水位高度的连续监测,并可设置报警深度,可靠性和耐高温性能较好。     

Optimal tracking performance of MIMO discrete‐time systems with communication constraints

The optimal tracking problem for multiple‐input multiple‐output linear‐time‐invariant discrete‐time systems with communication constraints in the feedback path is studied in this paper. The tracking performance is measured by the energy of the error signal between the output of the plant and the reference signal. The objective is to obtain an optimal tracking performance, attainable by all possible stabilizing compensators. It is shown that the optimal tracking performance consists of two parts, one depends on the nonminimum phase zeros and zero direction of the given plant, as well as the reference input signal direction, and the other depends on the nonminimum phase zeros, unstable poles, and pole direction of the given plant, as well as the bandwidth and additive white Gaussian noise of the communication channel. It is also shown that, if the constraint of the communication channel does not exist, the optimal tracking performance reduces to the existing tracking performance of the control system without communication constraints. A typical example is given to illustrate the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.