基于Intel 87c196kc的某机载设备随动系统数字控制器的实现

介绍了某机载光电设备随动系统控制器的设计与实现。该控制器是基于Intel公司87c196kc的数字控制器，设计中充分利用了87c196kc较强的运算能力及其它片内功能，使得控制器设计简捷、调整灵活、体积小，提高了系统的可靠性。     

手势语言识别的神经网络方法

提供了一种用于人机交互（HCI）的手势语言可视化识别方法。该方法包括用于几种控制命令的手势的探测、分割、特征提取及识别，第一步的处理都用到了神经网络方法，像肤色探测、主元分析（PCA）以及在编码识别。实验结果显示正确识别率高达94％。     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

多任务调度算法在单片机控制系统中的应用

为了满足单片机控制系统的复杂要求 ,提出了多任务调度算法 ,通过与单任务程序结构的对比和分析 ,详细说明了多任务调度算法的实现 ,指出了应用该算法的必要性 ,并且以科研生产的实例说明其具体应用。     

轴快流CO2激光器气体压力控制

激光切割对激光功率模式、功率密度和功率稳定性要求很高,采用轴快流CO2激光器时,控制工作气体压力工作在最佳状态并保持其恒定是激光器输出连续、稳定功率的必要条件和关键技术之一。在深入研究激光器工作原理和影响激光输出功率因素的基础上,采用带积分分离的智能PID控制算法对工作气体压力进行调节。该过程控制算法简单实用,可以有效地提高气体压力控制精度,改善功率控制精度和稳定性,并用实验加以验证。     

纳米氧化铝的制备及应用

介绍了高科技产品纳米氧化铝的 3大制备方法 :固相法、气相法、液相法的优缺点 ,以及纳米氧化铝的应用与发展前景     

Inversion of confluent Vandermonde matrices

This paper is concerned with the inversion of confluent Vandermonde matrices. A novel and simple recursive algorithm for inverting confluent Vandermonde matrices is presented. The algorithm is suitable for classroom use in both numerical as well as symbolic computation. Examples are included to illustrate the proposed algorithm.     

大型水平输气管线优化设计新方法

提出了含进分气点的水平输气管线优化设计新方法，该方法对于传统的优化思想进行了改进，概念清晰，方法简便，同时，将遗传算法引入输气管线的优化设计中，与常规的优化方法相比，具有明显的优越性。     

纳米Fe/C复合材料的原位合成

在石油渣油中加入二茂铁，通过热缩聚反的位合成纳米级铁粒子均匀分散于炭基体中的新型复合材料，研究了在420℃热缩聚时停时间和二茂铁添加量对Fe/C形成的影响，并用TEM和XRD观测和分析了Fe/C的形态和结构，结果表明，在基体中铁粒子的粒径为25－50nm，在一定条件下，二茂铁添加量的增加和停留时间的延长均使Fe/C产率提高，停留时间对热缩聚反应的影响遵循一级反应动力学，二茂铁的添加能显著提高反应速率常数k值。     

Mechanical and thermal properties of HVOF sprayed Ni based alloys with carbide

The objective of the present study is to develop multi-functioned coating to the components, which are made of copper with electroplated Ni and are widely used for steel making industry. In this paper, we report the mechanical and thermal properties of Ni based superalloys with carbide sprayed by high velocity oxygen fuel (HVOF), and the detailed effects of sprayed material, spraying conditions, and initial powder structure on these properties. It was found that, among commercial Ni self-fluxing alloys (without fusing treatment), coating with a carbon content of 0.58 mass% had the most preferable properties, with a good balance of the hardness, strength, and thermal shock resistance. The thermal shock resistance depended not only on the strength of the coating but also on the volume contraction when tested at high temperatures. For the several developed Ni based superalloys with carbide, Ni20Cr8Mo5Fe–WC and Ni16Cr15Mo3–WC demonstrated the prominent adhesion strength and thermal shock resistance with high Galvanic corrosion resistance through optimized spraying condition. Also, 20 mass% NiCr–Cr₃C₂ coating sprayed by using employed relatively small primary particle succeeded in achieving the multi-superior properties; high adhesion strength, high corrosion resistance and thermal shock resistance.