Synfuel development impacts— econometric modelling and policy analysis

The prospects for rapid near-term development of a synfuel industry in the USA have decreased, due to depressed world oil prices, synfuel project cost overruns, and the lukewarm support of the Reagan administration. Nonetheless, socioeconomic and environmental impact analysis studies can provide valuable information for determining the regional welfare effects of proposed projects. The author discusses the results of a regional econometric analysis of the synfuel projects planned for Western Kentucky, which focuses on environmental impacts, and reveals the inevitable trade-offs that would accompany synfuel development. Some policy issues are briefly reviewed, especially that of efficient energy pricing.     

碳/环氧复合材料的冲击拉伸

该文研究了T300碳纤维单向增强的环氧复合材料,在应变率从10~(-3)/s到10~3/s范围内的冲击拉伸行为.通过对实验数据进行拟合,得出该范围内材料对应变率具有弱的敏感性,表现在破坏强度及破坏应变随应变率增加不显著变化,平均模量几乎不受应变率的影响.分析了试件的几何尺寸效应,讨论了应力波作用对破坏形态的影响以及实验中观察到的拔出现象.从应变率在10~2～10~3/s附近材料行为某些非确定性,指出在更宽范围内了解其性能的必要性.     

基于激光多普勒测速法的2×106m/s2高冲击校准技术

在高冲击传感器动态性能校准中,实现高量程、宽脉冲激励是目前高冲击校准急需解决的问题。采用速度改变法校准原理,以气炮为激励源,利用激光多普勒测速方法测量砧体运动速度,建立高冲击校准系统。分析碰撞系统的作用原理,提出调整和控制激励脉宽的方法;分析测速误差,提出双光束差动侧向测速方法。实验结果表明:高冲击校准系统校准量程为2×106m/s2,激励脉宽在2×106m/s2时大于100μs,校准冲击灵敏度的扩展不确定度小于5%(k=2)。     

Visual recognition efficiency of handheld infrared thermometer interface information under low ambient illuminance

One of the symptoms of plagues, epidemics or pandemics is often a fever, so during such unprecedented times, handheld infrared thermometers are vital devices for monitoring symptomatic individuals. It is therefore very important to enhance reading efficiency when these thermometers are used for lengthy periods of time in a low illuminance environment. The need for the efficient reading of infrared thermometers or a fast reaction time when reading the information is even more relevant now during the COVID-19 pandemic. In this study, a target search experiment of digital characters is carried out through a simulated interface and use scenarios of a handheld thermometer based on three variables: the inclination angle or slant of the seven segment display characters, screen brightness, and ambient illuminance. The experimental results show that the inclination angle or slant of the characters and ambient illuminance have a significant effect on the reaction speed. In general, the slowest reaction time is found when reading characters with a slant of 10° to the left and the reaction time is the fastest with a right slant of 20°. A continued reduction in ambient illuminance does not affect the visual recognition performance but instead further enhances reading efficiency. Increasing the screen brightness increases the reaction time more in relatively low ambient illuminance conditions as opposed to relatively high ambient illuminance, which implies that in higher ambient illuminance conditions, a brighter screen needs to be used to obtain the same reaction speed as that in lower ambient illuminance conditions.     

气动锚杆钻机冲击频率测量仪的设计

针对气动锚杆钻机冲击频率不易测量的问题,提出了一种新型气动锚杆钻机冲击频率测量仪的设计方案。该测量仪采用压力传感器采集钻机冲击信号,采用电压比较器和单稳态触发器处理冲击信号并输入到单片机,由单片机计算出钻机冲击频率。实际应用表明,该测量仪可准确、方便地测量出钻机冲击频率。     

MMA7361L的高精度角度检测平台设计

倾角是许多控制系统中需要测量的一个重要参数。针对倾角测量,设计了一种基于ARM微控制器和加速度传感器的角度测量平台。该平台采用基于ARMCortex—M3内核的STM32F103VE为数据处理的核心,利用高精度加速度传感器MMA7361L为测角传感器,同时配置液晶屏和小型键盘实现了人机交互。该平台具有测量精度高、灵敏度高、价格低的特点,应用前景广阔。     

More on Goddard and the Kallikak family photographs.

Discusses retouching of the Kallikak family photographs in H. H. Goddard's (1912) study of mental retardation and heredity, with reference to analyses by R. E. Fancher (see record 1987-31600-001) and S. J. Gould (1981), and concurs with Fancher that the retouching was probably not done for deceitful purposes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

基于嵌入式技术的倾角传感器检测系统设计

介绍了加速度传感器MMA7260的工作原理、结构及功能,设计了一个基于ARM的实时嵌入式自动检测系统,使用μC/OS-II操作系统,构造一个具有角度测量、相关数据处理以及与上位机通信等功能的现场角度测量单元,上位机则主要完成系统监控和人机交互等功能。     

两轴稳定平台大俯仰角状态控制技术研究

在对两轴稳定平台一般构型分析的基础上,指出了其在俯仰方向大角度时稳定控制存在的不足,提出了采用三正交陀螺稳定控制方式解决大俯仰角控制问题的方法,最后利用MATLAB进行了数学仿真,结果表明该方法有效提高了系统的稳定精度。