The Adhesion and Formation Mechanism of Blast Furnace Gunning Layer

1 Introduction Gunning refractories are unshaped refractories commonly used in iron and steel industry for the main- tenance of furnace linings. The specific way of gunning processing requires the refractory to have specific rheo- logical properties so as…     

Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

应用吸水剖面资料确定吸水层动态残余油饱和度的方法

基于岩心长期注水试验资料，认识到吸水层的残余油饱和度的变化是一个缓慢减小的过程。文章给出了动态残余油饱和度的概念，提出了利用吸水剖面测井资料来确定动态残余油饱和度的方法。通过现场实测资料的解释，建立了动态残余油饱和度与吸水层每米累计吸水量的定量关系，为剩余油分布研究提供新思路。     

油气输导体系的类型及配置关系

将输导体系划分为储集层输导体系、断裂输导体系和不整合输导体系3大类，8种类型，指出输导体系的时空配置关系是决定油气藏的重要因素；着重阐明了输导层在空间和时间上的配置关系，认为这些配置关系是影响输导体系有效性的重要因素；提出了运移级次性的概念，讨论了划分运移级次对油气运移研究的意义，指出准噶尔盆地西北缘邻近玛湖以储集层输导体系和不整合输导体系为主．边缘地区以断层输导体系为主。浅层油气成藏期主要取决于断层的活动期。     

Stretchable Gold Tracks on Flat Polydimethylsiloxane (PDMS) Rubber Substrate

A process to fabricate stretchable gold tracks on silicone rubber substrates is studied by XPS, static water contact angle measurement, AFM, and SEM. The process involves several steps: removing uncured oligomers by hexane Soxhlet extraction; pre-stretching the substrate; activating the strained silicone surface by an oxygen plasma treatment; coating the strained substrate with 5 nm titanium and 80 nm gold layers; and finally releasing the sample. The plasma treatment creates a thin brittle silica-like layer that temporarily increases the substrate's surface energy. Indeed, the plasma treatment is followed by a hydrophobic recovery. As a consequence, the delay between plasma treatment and metal deposition has to be reduced as much as possible. The silica-like layer can be nicely observed after release. The entire process allows us to obtain stretchable metallized samples that remain conductive even after an excessive deformation leading to electrical failure.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

薄层隔热保温涂料的研制及应用

常规保温材料的研究以提高孔隙率、提高热阻、降低传导传热性能为主,但其对流传热及辐射传热较难降低。当今以传热机理改进保温材料及保温结构是重要发展方向。文章介绍了一种借鉴国外航天工业用高科技绝热涂层的技术思路,并结合国情研制成功的具有高辐射率的薄层隔热保温涂料,它可弥补常规保温材料的不足。该保温涂料以液态涂料方式存在,干燥后的涂层热阻较大,特别是热反射率高,可有效地降低辐射传热,施工方便,涂层薄,无接缝,附着力好,集防水隔热外护于一体。绝热等级为R21.1,热反射度0.79,热辐射率0.83,固含量54％,性能接近国外同类产品水平,成本仅为国外产品的1/4左右。可直接以涂层方式使用,也可与其他多孔保温材料复合构成低辐射传热结构,作为石油石化行业成品油罐及储罐的隔热保温、管道及设备的保冷及屋面隔热保温涂层使用,综合节能效益高。     

Wind turbine response to parameter variation of analytic inflow vortices

As larger wind turbines are placed on taller towers, rotors frequently operate in atmospheric conditions that support organized, coherent turbulent structures. It is hypothesized that these structures have a detrimental impact on the blade fatigue life experienced by the wind turbine. These structures are extremely difficult to identify with sophisticated anemometry such as ultrasonic anemometers. This study was performed to identify the vortex characteristics that contribute to high‐amplitude cyclic blade loads, assuming that these vortices exist under certain atmospheric conditions. This study does not attempt to demonstrate the existence of these coherent turbulent structures. In order to ascertain the idealized worst‐case scenario for vortical inflow structures impinging on a wind turbine rotor, we created a simple, analytic vortex model. The Rankine vortex model assumes that the vortex core undergoes solid body rotation to avoid a singularity at the vortex centre and is surrounded by a two‐dimensional potential flow field. Using the wind turbine as a sensor and the FAST wind turbine dynamics code with limited degrees of freedom, we determined the aerodynamic loads imparted to the wind turbine by the vortex structure. We varied the size, strength, rotational direction, plane of rotation, and location of the vortex over a wide range of operating parameters. We identified the vortex conformation with the most significant effect on the blade root bending moment cyclic amplitude. Vortices with radii on the scale of the rotor diameter or smaller caused blade root bending moment cyclic amplitudes that contribute to high damage density. The rotational orientation, clockwise or counter‐clockwise, produces little difference in the bending moment response. Vortices in the XZ plane produce bending moment amplitudes significantly greater than vortices in the YZ plane. Published in 2005 by John Wiley & Sons, Ltd.