岩心PI值试验研究及应用

主要论述了在多功能采油化学用剂评价仪上进行的岩心ＰＩ值试验的步骤，现象及结论。重点考察了岩心ＰＩ值与渗透率、流量及注入截面面积的关系；平行管岩心复合ＰＩ值和其中单管岩心ＰＩ值的关系。     

含淀粉聚乙烯膜的时控光降解研究

使用复合光降解剂，得到了可光降解的生物降解膜。对膜的光降解进行了考察，并对影响光降解的因素进行了讨论，结果表明，我们所制得的膜是一种较好的时控光降解膜。     

分子结构对增塑聚氯乙烯性能的影响

研究了聚合度、分子量分布和支化结构对增塑聚氯乙烯加工流变性能和物理力学性能的影响。结果表明，增塑ＰＶＣ的加工流变性能随聚合度的增加而恶化；拓宽分子量分布和引入支化结构均有利于加工流变性能的提高；增塑ＰＶＣ的拉伸强度随聚合度的增加而提高，而压缩永久变形却随之减小；分子量分布对物理力学性能的影响不大；支化ＰＶＣ的拉伸强度略有下降。     

油溶性减阻功能聚合物的研制

介绍了以混合α-烯烃为原料,制备了具有减阻功能的共聚物。讨论了催化剂浓度、聚合温度、预聚合时间、原料单体中杂质含量对共聚物特性粘度和转化率的影响。试验表明,在较低的催化剂浓度和预聚合温度下,能得到较高分子量的聚合物。气相色谱法和DSC法测定其组成和单体混合物的组成基本一致,表明共聚物是一种无规的梳状结构聚合物。该聚合物达到较高特性粘度时,能获得较好的减阻率。     

关于最优等效替代法的实质及其应用条件的研究

本文研究了经济分析基本方法之一最优等效替代法的实质,系统地导出了被评价方案的绝对经济指标与相对经济指标的关系,并结合典型案例分析指出了该方法的应用条件,对正确进行建设项目的经济评价具有现实意义。     

�ݼ����߷����������Ϸ�

通过对J.J.Arps方程的推导,提出了油气藏产量递减曲线分析的最佳拟合法。用该法可直接求出递减指数N、初始递减率D1及油气递减前的稳定产量Qi,避免了使用试差法的大量运算过程,大大提高了油气藏工程中指标预测的精度。     

A Novel Topological Index F and Its Correlation With Standard Formaton Enthalpies of AB_n(g) Molecules

The topological index F* is defined and obtained by the method of a non-dimensional unit calculation in which three matrices multiply with each other. These matrices represent the connective cases of atoms in a molecule, the structural features of atoms on top and the bonded cases of the adjacent atoms respectively. The standard formation enthalpies of ABn(g) molecules were correlated with F'* (A = C, Al, Si, Ti, Zr, B = F, Cl, Br, I, H, n=1 -4) and these correlation coefficients are all more than 0.96. Some molecules (e.g CH4, SiH4,etc. )can be preferably handled by F* but can not be dealt with by other topological indices. By contrast to traditional hydrogen suppressed graph, the contribution of hydrogen atoms to structures and properties of molecules is considered.     

应用地层测试流动段资料确定油井稳定产能方法研究

提出了一种根据地层测试流动段压力资料预测油井稳定产能的方法，该方法以比采油指数作为对比参数，对测试比采油指数的计算进行了推导，采用回归分析方法建立了测试比采油指数和生产比采油指数之间的关系式。应用建立的关系式对其它井的稳定产能进行了预测，误差分析表明预测结果比较正确。     

钻井企业技术创新评价模型研究

随着中国钻井企业改革的深化和市场经济的不断发展完善，在中国钻井企业中将会出现技术创新的热潮。以当前钻井企业所面临的问题与挑战为背景，根据近年来国内外技术创新与评价理论的最新研究成果，结合当前钻井企业技术创新的实际，构建了钻井企业技术创新评价指标体系，运用层次分析法和模糊综合评价法构建了钻井企业的技术创新评价模型，并进行了实例分析。     

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.