下运带式输送机液压制动系统的研究

首先对下运带式输送机的制动问题进行了分析,而后介绍了一种新型液压制动系统的基本原理、组成和用途,以及液压制动系统的控制要求和工作状态。实践结果表明,采用该液压制动系统从根本上保证了大倾角下运带式输送机的安全高效生产。     

中央空调系统变频节能改造方案

在我国经济快速发展的大背景下,能源（水、电、油）的消耗在企业中所占的比重越来越高,也受到愈来愈大的重视。同时也由于房地产的快速发展需求,中央空调的市场需求呈现强劲的增长。在市场容量不断增大的吸引下,越来越多的厂家加入到商用中央空调的领域。变频技术应用于中央空调系统,对提升中央空调自动化水平、降低能耗.减少对电网的冲击,延长机械及管网的使用寿命,都具有重要的意义。     

低渗透压敏油藏油井流入动态方程及其应用

注水开发的低渗透油藏存在启动压力和压力敏感性,使开发难度加大。当流压低于饱和压力以后,流入动态指示曲线凹向压力轴,会出现一个产量最大点。在前人研究的基础上,从平面径向拟稳态渗流规律出发,考虑启动压力梯度和压力敏感效应对油藏渗流的影响,与油相和液相相对流动能力方程相结合,建立了具有最大产量点的低渗透压力敏感油藏直井流入动态方程,据此可对油藏产能进行评价预测,确定出油井最低允许流动压力和油井的合理工作制度。在龙南、新站油田的应用表明,预测值与实测值比较吻合,满足矿场工程精度要求,说明所建立的流入动态方程能有效评价预测油井产能和确定油井允许的最小流压界限,为充分发挥油井生产能力、合理高效开发低渗透压力敏感油藏提供了理论依据。     

网络条件下的资本一般及其逻辑推演——利益、规则与标准

通过对资本一般概念的分析，结合资本一般的运动功能论述，认为在经济全球化和网络条件下，资本增值属性必然导致对规则和标准的争夺与控制，标准战是资本一般在新的经济社会形态下发展的必然逻辑结果。     

近似绝热条件下含酸DNT、TNT热分解过渡到热爆炸的实验研究

研究了近似绝热条件下含酸DNT、TNT模拟试样及生产现场采集试样从热分解过渡到热爆炸的热行为。讨论了TNT安全生产工艺参数。     

210 t转炉连接装置的有限元分析及强度校核

利用ANSYS Workbench对某210 t转炉整体模型的三种极限工况进行有限元分析,得到转炉系统的应力分布和总变形,同时得到连接装置各个零部件的应力分布,找出零部件的最大应力值及所处位置,并结合有限元计算结果对各个零部件进行强度校核.结果表明连接装置的强度满足要求。     

Evaluation of contrast metrics for liquid‐crystal displays under different viewing conditions

Abstract— A psychophysical experiment was carried out to assess the perceptual contrast on a large‐sized liquid‐crystal display (LCD) under nine phases of viewing conditions. Based on the results, six contrast models employing different color attributes or the index of just‐noticeable difference (JND) were developed. Their performances were also tested by the visual data of the nine phases, which indicated that the model C_Q employing CIECAM02 brightness gives the best performance in predicting visual data under different viewing conditions among those models. A preprocessing step was also proposed to utilize the contrast model C_Q conveniently in the practical contrast evaluation of LCDs.     

On the sizing of a solar thermal electricity plant for multiple objectives using evolutionary optimization

Design, implementation and operation of solar thermal electricity plants are no more an academic task, rather they have become a necessity. In this paper, we work with power industries to formulate a multi-objective optimization model and attempt to solve the resulting problem using classical as well as evolutionary optimization techniques. On a set of four objectives having complex trade-offs, our proposed procedure first finds a set of trade-off solutions showing the entire range of optimal solutions. Thereafter, the evolutionary optimization procedure is combined with a multiple criterion decision making (MCDM) approach to focus on preferred regions of the trade-off frontier. Obtained solutions are compared with a classical generating method. Eventually, a decision-maker is involved in the process and a single preferred solution is obtained in a systematic manner. Starting with generating a wide spectrum of trade-off solutions to have a global understanding of feasible solutions, then concentrating on specific preferred regions for having a more detailed understanding of preferred solutions, and then zeroing on a single preferred solution with the help of a decision-maker demonstrates the use of multi-objective optimization and decision making methodologies in practice. As a by-product, useful properties among decision variables that are common to the obtained solutions are gathered as vital knowledge for the problem. The procedures used in this paper are ready to be used to other similar real-world problem solving tasks.     

Beyond interpretation: Reply to Cummins' response

In his response to my Why There Are No Mental Representations, Robert Cummins accused me of having misinterpreted his views, and attempted to undermine a crucial premise of my argument, which claimed that one could only define a semantic type non-semantically by stipulating which tokens should receive a uniform interpretation. I respond to the charge and defend the premise.     

Water table fluctuation with a random initial condition

The nonlinear Boussinesq equation is used to understand water table fluctuations in various ditch drainage problems. An approximate solution of this equation with a random initial condition and deterministic boundary conditions, recharge rate and aquifer parameters has been developed to predict a transient water table in a ditch-drainage system. The effects of uncertainty in the initial condition on the water table are illustrated with the help of a synthetic example. These results would find applications in ditch-drainage design.Notation A / tanh t - a lower value of the random variable representing the initial water table height at the mid point - a+b Upper value of the random variable representing the initial water table height at the midpoint - B tanh t - C 4/ - h variable water table height - h mean of the variable water table height - h _m variable water table height at the mid point - h _m mean of the variable water table height at the mid point - K hydraulic conductivity - L half spacing between the ditches - m ₀ initial water table height at the mid point - N Uniform rate of recharge - S specific yield - t time of observation - x distance measured from the ditch boundary - (4/SL)(NK)^1/2 - (L/4)(N/K)^1/2 - dummy integral variable