Effect of niobium on thermal stability and impact toughness of Nd-Fe-B magnets with ultra-high intrinsic coercivity

The effects of Nb on the thermal stability and impact toughness of ultra-high intrinsic coercivity of Nd-Fe-B magnets were investigated.The results showed that the addition of Nb could improve the thermal stability,and obviously increased the impact toughness of sintered Nd-Fe-B magnets.The optimum thermal stability of sintered Nd-Fe-B magnets was obtained when the content of Nb was 1.0 at.%.The maximum impact toughness of sintered Nd-Fe-B magnets was obtained when the content of Nb was 1.5 at.%,but the magnetic properties of sintered Nd-Fe-B magnets drastically deteriorated when the content of Nb increased from 1.0 at.% to 1.5 at.%.The microstructure showed that overfull Nb addition made many ultra-fine grains get together,which led to the density of sintered Nd-Fe-B magnets decline and drastically deteriorated the magnetic properties of sintered Nd-Fe-B magnets.     

提高传感器输出特性线性化的神经网络方法

采用BP神经网络结构和LM网络学习规则对传感器系统的非线性误差进行线性校正和补偿,并对网络结构进行了适当的改进.用Matlab语言实现,计算比较了使用两种不同初始化规则和网络结构时对网络性能的影响.计算机仿真实验表明使用NW初始化规则并改进网络结构后,网络的收敛速度更快,拟合精度也有所改善.     

初始几何缺陷对非强支撑钢框架柱性能的影响

在钢框架二阶弹性分析中,结构整体初始几何缺陷和构件的初始几何缺陷是实际存在的,其影响不应忽略。基于由单根柱和梁组成的框架子结构模型,通过引入以上两种几何缺陷,得出了考虑初始几何缺陷影响的框架柱位移与内力的理论公式。利用该理论模型,可以较准确地分析框架结构整体几何缺陷与构件几何缺陷对二阶弹性弯矩的影响。参数分析结果表明:对于钢框架柱,结构的整体几何缺陷和构件几何缺陷对弯矩的影响均可以等效为作用于楼层处的假想水平力,而假想水平力的大小与作用于该楼层的竖向荷载有关。     

磨粉机轧辊失效机理及提高使用寿命的途径

本文探讨了磨辊的磨损失效机理。用扫描电镜分析磨粉机轧辊的磨面和磨屑,提供了疲劳脱落和不均匀磨损的证据。侧磨试样发现磨辊亚表层显微裂纹,珠光体抑制渗碳体中裂纹的扩展。 经变质处理,在硬度变化不大情况下提高铸铁冲击韧性。磨损试验表明,相对耐磨性随韧性提高而提高,硬度与相对耐磨性并非线性关系,硬度与韧性相匹配的材料具有良好的抗磨性,装机试验比原材料磨辊使用寿命提高30％。     

Φ1000mm甲醇合成塔缠绕钢带的预拉应力分析

介绍Φ１０００ｍｍ甲醇合成塔绕带式容器预拉应力的控制和绕带的产品质量。     

The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics

In this study, the influence of the shape and size of the pores on the mechanical properties of the obtained porous HAP-based bioceramics was investigated. The porous HAP-based bioceramics were obtained starting from spherical calcium hydroxyapatite powder, obtained by hydrothermal syntheses. The number of shapeless inter-agglomerate pores decreased and amount of spherical intra-agglomerate pores increased on increasing the sintering temperature from 1100 °C to 1250 °C. The shape of pores also changed with thermal treatment of specimens; the small pores remained spherical while the larger pores became more spherical in shape, as was proved by image analysis. A three-dimensional, finite element unit cell model was applied to evaluate the influence of pore shape on the mechanical strength of HAP ceramics. By analyzing the effect of the shape of pores to the fracture toughness of sintered porous HAP bioceramics, it was observed that the more spherical the pores were, the tougher became the bioceramics. After sintering at 1250 °C for 2 h, measured toughness was 1.31 MPa m^1/2, which is a relatively high value for this type of bioceramics.     

The effect of montmorillonite and compatibilizer quantities on stiffness and toughness of polyamide nanoblends

Although polymer blend nanocomposites are widely studied, the balance between stiffness and toughness has not yet been investigated in detail. Some materials producers as well as some sectors in the automotive industry try to improve the toughness of materials without an important loss in stiffness. With this in mind, the aim of the study reported here was to obtain a good balance between toughness and stiffness of polymer blends with different amounts of clay and compatibilizer. In this context, the microstructure of polyamide 6/ethylene–propylene–diene metallocene terpolymer/(ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) blends with various amounts of clay (2, 3, 4 and 5 wt%) and compatibilizer (10 and 20 wt%) was studied to analyse the achieved morphology to understand the macroscopic properties. The morphology of the rubber phase and the dispersion of the montmorillonite (MMT) are the main factors that influence the mechanical properties. In this sense, the highest Young's modulus is achieved for nanoblends with 5 wt% of MMT, although this nanoblend has the lowest value of notched Izod impact strength. The results obtained suggest that there is a clear trade‐off between stiffness, toughness and temperature behaviour when the ratio of (ethylene–propylene–diene copolymer)‐graft‐(maleic anhydride) to MMT is 5:1. Copyright © 2009 Society of Chemical Industry     

Development of the Local Approach to Fracture over the Past 25 years: Theory and Applications

This review paper is devoted to the local approach to fracture (LAF) for the prediction of the fracture toughness of structural steels. The LAF has been considerably developed over the past two decades, not only to provide a better understanding of the fracture behaviour of materials, in particular the failure micromechanisms, but also to deal with loading conditions which cannot easily be handled with the conventional linear elastic fracture mechanics and elastic–plastic fracture mechanics global approaches. The bases of this relatively newly developed methodology are first presented. Both ductile rupture and brittle cleavage fracture micromechanisms are considered. The ductile-to-brittle transition observed in ferritic steels is also briefly reviewed. Two types of LAF methods are presented: (i) those assuming that the material behaviour is not affected by damage (e.g. cleavage fracture), (ii) those using a coupling effect between damage and constitutive equations (e.g. ductile fracture). The micromechanisms of brittle and ductile fracture investigated in elementary volume elements are briefly presented. The emphasis is laid on cleavage fracture in ferritic steels. The role of second phase particles (carbides or inclusions) and grain boundaries is more thoroughly discussed. The distinction between nucleation and growth controlled fracture is made. Recent developments in the theory of cleavage fracture incorporating both the effect of stress state and that of plastic strain are presented. These theoretical results are applied to the crack tip situation to predict the fracture toughness. It is shown that the ductile-to-brittle transition curve can reasonably be well predicted using the LAF approach. Additional applications of the LAF approach methods are also shown, including: (i) the effect of loading rate and prestressing; (ii) the influence of residual stresses in welds; (iii) the mismatch effects in welds; (iv) the warm-prestressing effect. An attempt is also made to delineate research areas where large improvements should be made for a better understanding of the failure behaviour of structural materials.     

利用VC++开发中小型数据库信息管理系统的框架

本文介绍了一种利用VC + +命令传递机制和切分窗口技术制作中小型数据库信息管理系统的框架的方法 ,主要介绍主初始界面的制作