用于确定双吸离心泵Suter曲线的三维内特性法研究

水泵Suter曲线是泵站水锤分析的必备条件之一。现有用于获取双吸离心泵Suter曲线的实测法具有难度大、成本高的特点,而间接插值估算法的精度又比较低,本文提出了一种通过水泵流场三维数值计算确定双吸离心泵Suter曲线的新方法,简称三维内特性法。该方法采用计算流体力学(CFD)技术,对双吸离心泵的水力模型进行三维造型、工况离散、流场计算及结果转化,以快速、准确地获取双吸离心泵Suter曲线,在正水泵工况、正水轮机工况、反水轮机工况、反水泵工况等工况下,计算出相应流量、转速、扬程和转矩关系。定量分析表明,相比于间接插值估算法,采用三维内特性法获得的Suter曲线中,Wh(x)的计算精度平均提高了39.2%,Wb(x)的计算精度平均提高了26.3%;在将采用该方法获得的双吸离心泵Suter曲线用于事故停泵工况水锤分析时,计算得到的系统最大压力降低了15.0%,管线发生汽化压力的范围缩减了81.4%,双吸离心泵的最大倒流量增大了11.9%,最大倒转速降低了6.1%,与实际测试结果更为接近。该方法为提高双吸离心泵站水锤分析精度提供了一种新技术途径。     

The design of experiments,training and implementation of nonlinear controllers based on neural networks

In the area of nonlinear predictive control, several control schemes using artificial neural networks have been proposed. In this work, the issues relating to the information contents of the data used to train the neural network components of these nonlinear predictive control schemes are considered. This raises questions about the design of experiments. A class of feedback-feedforward nonlinear controller based on the model predictive structure (also known as Internal Model Control, IMC, structure) is investigated. The implementation and performance of these neural network based controllers, together with comparisons to other nonlinear and linear controllers, are illustrated on two nonlinear continuous-stirred-tank-reactor simulations.     

基体和增强体对聚合物基摩擦材料性能影响研究

摩擦系数、磨损率和冲击强度是聚合物基摩擦材料的重要性能指标。本文试验研究基体含量对摩擦系数、磨损率的影响和增强体含量对冲击强度的影响,从理论方面分析增强体对摩擦磨损性能的影响。试验结果表明,在进行聚合物基摩擦材料的配方设计时,要根据所选用酚醛树脂和增强纤维的种类合理控制用量,可达到较好的摩擦磨损性能和冲击韧性。     

N－氰基乙亚胺酸乙酯含量的气相色谱分析

采用GC-900气相色谱仪、3%PEG-12000/Chromosorb880AWDMCS填充柱和FID检测器,以水杨酸甲酯为内标物测定N-氰基乙亚胺酸乙酯含量,回收率在98.5%—101.8%之间,标准偏差为0.27%,变异系数为0.27%。     

Friction and adsorption properties of normal and high-oleic soybean oils

The steel/steel boundary friction properties of soybean oil (SBO) and high-oleic soybean oil (HOSBO) are compared. HOSBO is significantly more saturated than SBO and more oxidatively stable. Changes in degree of unsaturation affect lateral interactions of adsorbate molecules, which in turn affects their adsorption and, hence, their boundary lubrication properties. To investigate this possibility, the free energies of adsorption (ΔG _ads) of SBO, HOSBO, and methyl laurate (ML) were determined from the analysis of friction-derived adsorption isotherms using the Langmuir and Temkin adsorption models. The results showed a stronger adsorption for the vegetable oils than for ML, an indication of multiple interactions between the ester groups of the triglycerides and the steel surface. The result also showed no difference in the ΔG _ads values of SBO and HOSBO obtained using either the Langmuir or Temkin models. This was interpreted as an indication of the lack of appreciable net lateral interaction between triglyceride adsorbates.     

氮化硅陶瓷高温摩擦学性能

本文研究热压氮化硅陶瓷与３Ｃｒ２Ｗ８Ｖ钢组成的销－盘摩擦副，在空气中非润滑条件下，４００～８００℃不同载荷（４９～３４３Ｎ）的摩擦磨损性能；测定了磨擦系数和Ｓｉ３Ｎ４销的磨损因子；通过对Ｓｉ３Ｎ４磨损面的ＳＥＭ形貌观察、Ｘ射线相结构分析，探讨了陶瓷销的磨损机理     

Coordination between strategic forest management and tactical logistic and production planning in the forestry supply chain

In this paper, we study the coordination mechanism in the forestry supply chain between strategic forest management and tactical production planning. We first formulate an integrated model to establish a theoretical benchmark for performance of the entire supply chain. It is a mixed integer programming model that involves harvesting, bucking, transportation, production, and sales decisions for both tactical and strategic planning levels. We then present two sequential approaches S‐A and S‐B where the coordination is done through internal pricing. S‐A is the approach currently used in practice where harvesting in the forest is the main driver of the supply chain activities and internal pricing is introduced to control bucking decision in a separate stage. In contrast, S‐B takes downstream demand information into consideration and internal pricing directly influences harvesting decision in the first stage. In order to find the appropriate setting of internal pricing that leads to the system optimum, we suggest two heuristics H‐I and H‐II. The internal pricing in H‐I is based on dual values and in H‐II, it is derived from a Lagrangian decomposition. A real‐life case study in the Chilean forestry industry is used to compare the results of different approaches. It is shown that the new sequential approach S‐B generates as good feasible solution as that obtained from the integrated approach but in much less time. Both heuristics H‐I and H‐II bring about near‐optimal feasible solutions. H‐II also provides optimistic bound of the optimal objective function value, which can be used as a measure of the solution quality.     

Effects of carbon black on tribology of blends of poly(vinylidene fluoride) with irradiated and non-irradiated ultrahigh molecular weight polyethylene

Friction and wear resistance are two vital tribological properties of polymer-based materials but optimization of both is rarely attempted. We have investigated blends of 70 wt% poly(vinylidene fluoride) (PVDF)+30% ultra high molecular weight polyethylene, the latter either un-irradiated or else γ-irradiated. Each sample contained varying amounts of carbon black (CB) and also had a varied degree of crosslinking and irradiation dose. We have determined static and dynamic friction, scratch resistance, and sliding wear in multiple scratching tests. Effects of the irradiation dose and CB concentration have been quantified. The electric conductivity threshold is reflected in a drop of static friction; formation of a continuous phase of the lubricant affects tribology as well as electrical properties—both for irradiated and for un-irradiated samples. The scratch resistance as represented by the residual (healing) depth is affected by crosslinking, by the stage at which irradiation is applied (before or after blending) and by CB addition. Crosslinking by moderate amounts of irradiation provides shallower residual depths while higher doses cause adverse results. Similarly, the CB lubricant can either improve or worsen the scratch resistance. A combination of both approaches produces either better or else worse results than crosslinking alone. Lower friction seems accompanied by higher scratch resistance. A combination of a specific irradiation dose and an optimized CB concentration lowers the sliding wear significantly. Strain hardening in sliding wear determination takes place for all materials studied, irrespective of the extent or radiation-induced crosslinking and of the presence and concentration of carbon black.     

Characterisation of cut and chip behaviour for NR,SBR and BR compounds with an instrumented laboratory device

ABSTRACT

Understanding the cut and chip (CC) effect in rubber is important for successful product development for tires used in off-road or poor road conditions and for other demanding applications of rubber. This research describes a laboratory testing method for characterising the CC fracture behaviour of rubber using a device that controls and records multiple applied loads and displacements during cyclic impact to the surface of a solid rubber specimen to mimic and quantify the CC damage experienced by tire tread compounds. To study the capabilities of the instrument, three model compounds were studied that are based on carbon black reinforced compounds of common elastomers used in tire treads: natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). These polymers have well-established CC tendencies in field performance of tire treads, with NR exhibiting the best CC resistance followed by SBR and finally BR. The same trend was found with the rubber impact testing approach that allowed the CC behaviour to be quantified using a new physical parameter which is the CC propensity (P). The relative ranking for CC resistance for the three compounds followed the fatigue crack growth resistances of the materials but was exactly opposite to the ranking of DIN abrasion resistance. This provides evidence that CC damage from impact by mm-scale asperities and abrasion of rubber against μm-scale asperities exhibit distinct characteristics in rubber.     

Preparation and properties of microcapsule with EVA core‐PU shell structure

Microcapsule with poly(ethylene‐co‐vinylacetate) (EVA) core‐polyurethane (PU) shell structure was synthesized by interfacial polymerization in aqueous polyol dispersion with ethylene diamine as the chain extender of toluene diisocyanate in poly(vinyl alcohol) aqueous solution as the stabilizing agent. The effects of polyol constituent on the average particle size and distributions, morphologies, color strength, and friction fastness of core‐shell particles were investigated to design microcapsule. The friction fastness of printed fabrics with EVA core‐PU shell microcapsules became the increase to 4–5 grades. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 893–902, 2007