Laboratory Evaluation of Smear Zone and Correlation between Permeability and Moisture Content

In this study, the extent of the smear zone and the reduction of permeability and water content within the smear zone were investigated using a large-scale consolidometer. The installation of vertical drains by means of a mandrel causes significant disturbance of the subsoil surrounding the mandrel, resulting in a smear zone. The extent of the smear zone for Moruya clay (New South Wales, Australia) was estimated on the basis of normalized permeability and the reduction of water content by taking undisturbed samples (horizontally and vertically) at different locations. This study reveals that a significant reduction in water content and horizontal permeability takes place towards the drain, whereas the variation in the vertical permeability is negligible. The smear zone for Moruya clay was found to be 2.5 times the equivalent radius of the mandrel with the horizontal permeability varying from 1.09 to 1.64, an average of 1.34 times smaller than that of the undisturbed zone. Finally, a correlation between the permeability decrease and water content reduction within smear zone is proposed.     

The importance of the compression test procedure for plastic drums for dangerous goods

Packagings for the transport of dangerous goods are tested by four tests:- free fall, leakproofness, hydraulic pressure and stacking. However, the test procedures can be interpreted in different ways, particularly the stacking test. Some test authorities apply a guided load to the top of the package and others, including the LNE in France, use non-guided loads. The objective of recent research carried out at LNE was to evaluate the risk (in terms of stack stability for dangerous goods packagings) if the stacking tests are performed with guided loads rather than non-guided loads. The stacking tests were carried out on a limited number of plastic drums (200 of four types) submitted for qualification testing using the above four tests, with either guided or non-guided loads. From the results we conclude that:

• i for the transport of dangerous goods of Danger Group I, the field of use is not altered when tested by either procedure.
• ii with goods of Danger Groups II and III, the use of either procedure does not alter the position as far as transport is concerned. However, there is a risk in warehousing: the non-guided procedure being preferred.

     

Predicting N mineralized in a Georgia Coastal Plain field

The N mineralized from soil organic matter provides an important portion of N available for crop production. The objective of this study was to determine the amount of spatial variability in N mineralization potential in a field and to evaluate three different methods that might be used to estimate this variability. The three methods tested included predicting the N mineralized from surface soil properties as well as from a biological and a chemical procedure. Three soils varying in N mineralization potential were selected for the study from a field in the Georgia Coastal Plain. The N mineralized from these soils was determined by an N balance of unfertilized and cropped plots. The amount of N mineralized could not be reliably predicted from surface soil organic C, although surface soil clay concentration was positively correlated with the N mineralized. The N mineralized that was predicted using mineralization parameters determined by aerobic incubation, adjusted daily for soil water content and temperature, was approximately 50% of the field measurements of N mineralized. The values of NH₄-N extracted with hot 2 M KCl were related significantly to N mineralized in the field (r²= 0.60) and also to the zero order rate constant of mineralization, k₀ (r²= 0.77), determined from the N mineralized in the aerobic laboratory incubation.     

Processing study of a high temperature adhesive

An adhesive-bonding process cycle study was performed for a polyimidesulphone. The high molecular weight, linear aromatic system possesses properties which make it attractive as a processable, low-cost material for elevated temperature applications. The results of a study to better understand the parameters that affect the adhesive properties of the polymer for titanium alloy adherends are presented. These include the tape preparation, the use of a primer and press and simulated autoclave processing conditions. The polymer was characterized using Fourier transform infrared spectroscopy, glass transition temperature determination, flow measurements, and weight loss measurements. The lap shear strength of the adhesive was used to evaluate the effects of the bonding process variations.     

高职院校开放型计算机实验室统筹管理模式探索

实验室开放是高职院校实验教学改革的必然趋势,该文就实验室开放式管理的意义进行了阐述,对传统计算机实验室在管理的维护中存在的问题进行了分析,并提出了开放型实验室建设管理的几点具体措施,探索了多层次、多形式的实验室开放的途径,使计算机实验室真正实现时间、空间、内容的全方位开放。     

悬挂式重力补偿系统精密跟踪方法

介绍了一种用于研究空间机器人微重力条件下的工作特性的悬挂系统——悬挂式重力补偿系统,并给出了悬挂模块的动力学模型.通过数值求解与仿真,运用非线性规化求出了一定条件下的最优控制参数;用正交试验寻优、基于时间最优控制的试凑法证明了优化模型的解正确性.该研究为空间机器人地面试验系统模拟微重力环境下精密跟踪运动提供了最优控制方法.     

数字化语音室的系统故障诊断

数字化语音实验室在学校当前语言教学中起着至关重要的作用.为了保障数字化语音实验室的设备正常高效运转,更好地为外语教学和学生学习服务,分析了数字化语音室存在的一些主要问题,总结了其常见的一些故障,就数字化语音实验室的系统故障诊断提出一些建议,可为语音室的日常管理与维护提供参考.     

提升检测机构水平、保持体系有效的运行

探讨了检测机构提高管理水平和技术能力的途径,提出了保持管理体系的持续有效运行方法。     

TBC experience in land- based gas turbines

This paper summarizes prior and on-going machine evaluations of thermal barrier coatings (TBC) for power generation, that is large industrial gas turbine applications. Rainbow testing of TBCs on turbine nozzles, shrouds, and buckets are described along with a test of combustor liners. General Electric Power Generation has conducted more than IS machine tests on TBC turbine nozzles with various coatings. TBC performance has been quite good, and additional testing, including TBCs on shrouds and buckets, is continuing. Included is a brief comparison of TBC requirements for power generation and aircraft turbines.     

A minimum Hellinger distance estimator for stochastic differential equations: An application to statistical inference for continuous time interest rate models

A minimum disparity estimator minimizes a φ-divergence between the marginal density of a parametric model and its non-parametric estimate. This principle is applied to the estimation of stochastic differential equation models, choosing the Hellinger distance as particular φ-divergence. Under an hypothesis of stationarity, the parametric marginal density is provided by solving the Kolmogorov forward equation. A particular emphasis is put on the non-parametric estimation of the sample marginal density which has to take into account sample dependence and kurtosis. A new window size determination is provided. The classical estimator is presented alternatively as a distance minimizer and as a pseudo-likelihood maximizer. The latter presentation opens the way to Bayesian inference. The method is applied to continuous time models of the interest rate. In particular, various models are tested using alternatively tests and their results are discussed.