Insolubilization of sodium chondroitin sulfate by forming a semi‐interpenetrating polymer network with acrylic acid: A potential carrier for colon‐specific drug delivery

To reduce the highly hydrophilic property of chondroitin sulfate (ChS), a semi‐interpenetrating polymer network (semi‐IPN) of chondroitin sulfate/polyacrylic acid (PAA) was prepared as a drug carrier by crosslinking acrylic acid with diethyleneglycol diacrylate. The swelling properties of the semi‐IPNs with different concentrations of crosslinking agent were correlated. The moisture sorption profiles were evaluated using differential thermal analysis. Ketoprofen was used as a drug probe to evaluate the performance of the drug released from the semi‐IPN matrices. The prepared semi‐IPNs demonstrated significant swelling reduction properties with both gastric and intestinal fluids compared with those of both the pure ChS and the ChSAA blend without the crosslinking agent. The amount of accumulated drug released from the semi‐IPNs was less than 30 wt % at pH 1.2 and up to 80 wt % at pH 7.4. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 114–122, 2002     

Preparation of porous poly(lactic acid)/Sio2 hybrid microspheres

With 3‐aminopropyltriethoxysilane (APTES) as coupling agent, poly(lactic acid) (PLA)/SiO₂ hybrid material was prepared to produce poly(lactic acid)/SiO₂ hybrid microspheres (PLAHs) with porous structure bythe oil‐in‐water, single‐emulsion solvent evaporation method. Field scanning electron microscopy results show that the PLAHs were porous microspheres about 20 μm in diameter. The holes in the PLAHs opened outside and were not complicated. A nitrogen adsorption–desorption experiment showed that the nitrogen adsorbed in the holes was easily desorbed, and the specific surface area of the PLAHs was calculated to be 6.87 m²/g according to the Brunauer–Emmett–Teller equation. Fourier transform infrared spectroscopy results show that PLA was amidated with APTES successfully and formed a kind of organic–inorganic hybrid material by hydrolysis and con‐condensation with tetraethoxysilane. Moreover, the molecular structure of the hybrid material was confirmed by X‐ray photoelectron spectroscopy. Differential scanning calorimetry results show that the melting point ofthe PLAHs was higher than that of PLA by about 11.2°C. These PLAHs may be used in the controlled release of drugs by the embedding of the drugs in the holes of the PLAHs, and the drug loading amount can be controlled by the size and number of holes in the PLAHs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 679–683, 2006     

一种求解网损因子的新方法

从耗散功率转归理论所提出的支路功率损耗公式出发,分别针对考虑与不考虑节点注入无功功率对有功功率损耗的影响两种情况下,推导出了用于求解系统总的有功损耗、各节点应当分摊到的有功损耗、节点网损因子的新公式。与传统求解方法相比,该方法完全依靠支路的参数,物理含义清晰,更易于计算。     

张家口地区电子文献传递系统(EDDS)的开发研究

随着人们对信息资源的需求及文献传递工作的重视,文献传递的服务模式及发展趋势逐渐成为社会所关注的问题.本课题通过分布式文献传递的服务模式,利用完备的网络搜索系统模型,构建张家口地区高校图书馆之间的电子文献传递桥梁.     

Cephazoline sodium release from poly(N‐isopropyl acrylamide‐co‐N,N‐dimethylacrylamide) hydrogels

Hydrogels are hydrophilic polymers that swell to an equilibrium volume in the presence of water, preserving their shape. The dynamic swelling behavior of poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide) [poly(NIPA‐co‐DMA)] copolymers at 37°C was investigated. It was observed that the swelling degree in the copolymers decreases with the N‐isopropylacrylamide content. In addition, the liberation mechanism was found to be Fickian. Diffusion coefficients according to Fick′s law as a function of the N‐isopropylacrylamide concentration and results of the release process are reported. The kinetics of cephazoline sodium release from poly(NIPA‐co‐DMA) hydrogels with different compositions was studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3433–3437, 2004     

Effect of montmorillonite on the swelling behavior and drug‐release behavior of nanocomposite hydrogels

A series of nanocomposite hydrogels were prepared from various ratios of N‐isopropylacrylamide (NIPAAm) and organic montmorillonite (MMT). The influence of the extent of MMT in the NIPAAm/MMT nanocomposite hydrogels on the physical properties and drug‐release behavior was the main purpose of this study. The microstructure and morphology were identified by X‐ray diffraction (XRD) and scanning electronic microscopy (SEM). The results showed that the swelling ratios for these nanocomposite hydrogels decreased with increase in the content of MMT. The gel strength and Young's modulus of the gels also increased with increase in the content of MMT. XRD results indicated that the exfoliation of MMT was achieved in the swollen state. Finally, the drug‐release behavior for the gels was also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3652–3660, 2003     

Preparation and characterization of chitosan-poly(acrylic acid) polymer magnetic microspheres

A modified method to prepare chitosan-poly(acrylic acid)(CS-PAA) polymer magnetic microspheres was reported in this paper. First, via self-assembly of positively charged CS and negatively charged Fe₃O₄ nanoparticles, magnetic CS cores with a large amount of Fe₃O₄ nanoparticles were successfully prepared. Subsequently, the AA monomers were polymerized on the magetic CS cores based on the reaction system of water-soluble polymer-monomer pairs. These polymer magnetic microspheres had a high Fe₃O₄ loading content, and showed unique pH-dependent behaviors on the size and zeta potential. From the magnetometer measurements data, the CS-PAA polymer magnetic microspheres also had superparamagnetic property as well as fast magnetic response. A continuous release of the entrapped ammonium glycyrrhizinate in such polymer magnetic microspheres occurred, which confirmed the potential applications of these microspheres for the targeted delivery of drugs.     

Near infrared light-induced disassembly of polymeric micelles based on methylene blue conjugated polyethylene glycol

Light-sensitive drug delivery systems are considered ideal for applications in the biomedical fields for their ability to release the payload in an on-demand spatiotemporal controlled manner through the manipulation of the light source. Among the broad radiation spectrum, near infrared (NIR) light is considered advantageous compared to UV and visible light, due to its inherently lower photodamage to normal tissues and deeper penetration to lesion areas. In this study, we report a successful synthesis of a polymer capable of undergoing partial degradation upon irradiation with NIR light by conjugating 10-N-carbamoyl linkage methylene blue (MB) moiety, a NIR photocleavable ligand, with polyethylene glycol (PEG). Through effective coupling of MB, a hydrophobic moiety, to the hydrophilic PEG molecule, an amphiphilic polymer was synthesized, as demonstrated by a lowered surface tension (55 mN/m at 0.1% wt/vol). Subsequently, photo-induced reversal of surface activity associated with self-assembled structure disruption, was displayed by surface tension measurements, size distribution analysis, and burst release profile of paclitaxel (PTX) from polymeric micelles upon the exposure to NIR irradiation.     

Iodine-loaded poly(silicic acid) gellan nanocomposite mucoadhesive film for antibacterial application

Iodine-loaded poly(silicic acid) gellan nanocomposite film was fabricated and evaluated for antibacterial properties. Poly(silicic acid) nanoparticles were synthesized by condensation of silicic acid under alkaline conditions in the presence of polyvinyl pyrrolidone, phosphate ions, and molecular iodine. The nanoparticles were incorporated into gellan dispersion to prepare gellan nanocomposite film using the solvent casting method. The nanocomposite films were characterized by Fourier transformed infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction studies. The results of characterization studies indicated improved thermal stability and an increase in the degree of crystallinity. The scanning electron micrographs and energy dispersive X-ray spectrum confirmed the uniform dispersion of silica and iodine in the nanocomposite films. The analysis of physical and mechanical properties revealed the enhanced tensile strength, moisture resistance, and higher folding endurance of poly(silicic acid) gellan nanocomposite films as compared to gellan film. Further, the iodine-loaded poly(silicic acid) gellan nanocomposite films showed good antibacterial activity against Staphylococcus aureus and Escherichia coli and effective mucoadhesive strength. The results indicate that iodine-loaded poly(silicic acid) gellan nanocomposite mucoadhesive film can be used for potential antibacterial applications in pharmaceuticals.     

Modulating drug release from poly(lactic-co-glycolic) acid microparticles by the addition of alginate and pectin

The aim of the present work is the characterization of PLGA microparticles including biopolymers for the controlled release of tilmicosin, a broad-spectrum antibiotic. Microparticles were prepared using the double-emulsion solvent evaporation technique. The effect of alginate and pectin incorporation over particle size and porosity, encapsulation efficiency (EE) and pH-responsive drug release was evaluated. Formulations presented a mean particle size of 5.5 μm approximately and a drug EE ranged from 22%–57%. PLGA-Alginate particles showed an increased porosity. Tilmicosin release profiles from PLGA and PLGA-biopolymer microparticles were affected by the particular combination of polymers and the pH of the release medium. The experimental data was simulated using a mathematical model, which takes into account the autocatalytic polymer degradation and the different mechanisms of drug transport. The combination of PLGA and biopolymers strongly influenced the morphology of the particles, offering the possibility of controlling the drug release profiles according to the therapy.