Geomorphic diversity as a river management tool and its application to the Ganga River,India

Understanding of geomorphic processes and the determination of geomorphic diversity in catchments are prerequisites for the sustainable rehabilitation of river systems and for reach‐scale assessment of river health. The Ganga River system in India is a large, complex system consisting of several long tributaries, some >1,000 km, originating from 2 distinct hinterlands—the Himalaya to the north and the cratons to the south. Traversing through a diverse climatic regime across the Plain and through precipitation zones ranging from 600 mm/year near Delhi to 1,200 mm/year in the eastern plains, the Ganga River system has formed very diverse landform assemblages in 3 major geomorphic domains. We have recognized 10 different river classes for the trunk river from Gangotri (source) to Farakka (upstream of its confluence with the Brahmaputra) based on (a) landscape setting, (b) channel and active floodplain properties, and (c) channel planform parameters. The mountainous stretch is characterized by steep valleys and bedrock channels and is dominated by large‐scale sediment production and transport through hill slope processes. The alluvial part of the river is characterized by 8 different river classes of varying reach lengths (60–300 km) many of which show sharp transitions in landscape setting. We have highlighted the application of this approach for the assessment of habitat suitability, environmental flows, and flood risk all of which have been significantly modified during the last few decades due to large‐scale anthropogenic disturbances. We suggest that the diversity embedded in this geomorphic framework can be useful for developing a sustainable river management programme to “work with” the contemporary character and behaviour of rivers.     

岩体结构面对大跨度隧道工程稳定性影响初步研究

基于对沈阳至大连（简称沈大）高速公路扩建工程韩家岭隧道区域调查和分析，研究了岩体结构面对隧道施工过程的影响，围岩失稳方式及可能遇到的问题，并提出了解决这些问题的措施。     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

引水工程大流量渡槽结构型式选择

针对工程等级高、过水流量大、抗震设防要求高的引水工程,渡槽结构型式选择存在工程技术难题,根据引水工程渡槽槽墩较高、荷载大、结构断面大、沉降变形影响因素较为复杂特点,进行了渡槽支承型式、槽身截面形式、渡槽墩身的比选。结果表明:简支结构具有减少施工难度和不均匀沉降对槽体结构应力影响,简化结构受力条件,简支结构较为有利优点。空心重力墩具有节省材料,充分利用材料强度,刚度较大,墩身质量较轻,抗震能力和抗冲击强,高度较大优点,对类似工程设计具有参考意义。     

中国冲积大河的河型分布与成因

结合遥感影像、野外调查和水沙数据,以冲积大河为研究对象,分析中国大河的河型分布及成因。中国大河的冲积河段以弯曲与辫状河型为主,局部河段为分汊与网状河型。综合考虑河型分布的一般性和特殊性,认为相对输沙率(来沙量与输沙能力之比)、相对河岸侵蚀切应力(近岸水流切应力与河岸临界抗冲切应力之比)和河谷地形控制(如节点和宽度)是决定河型成因的3个最主要的因素。     

输出窗材料的研究进展

输出窗是高真空微波管中的关键构件,本文对目前应用的各种输出窗材料的性能、制备以及应用现状进行了评述。针对大功率毫米波微波管用输出窗材料的需求,提出了制备输出窗复相陶瓷以及创新制备方法等解决思路。     

化工投资重点应在大型企业

本文分析了１９９３年化工百强企业的经济状况，提出化工投资重点应放在大型企业。     

超长、超大基坑开挖对邻近地铁结构安全影响的数值模拟分析

为了研究超长、超大基坑开挖对邻近地铁结构安全影响,以西安地铁2号线周边某基坑为工程实例,通过运用数值分析软件,结合场地的水文地质和工程地质条件,建立数值模型,进行施工过程的动态模拟,同时进行现场监测,经对比数值模拟结果及监测数据,表明运用PLAXIS软件能有效的模拟基坑开挖过程中的土体变形。同时工程采用的分段、分块开挖,中心岛顺做,周边预留土台反压、使用旋喷锚索的支护方案,对复杂条件下基坑开挖对邻近地铁结构的变形影响能起到有效的控制作用,可对类似工程的设计优化提供有益的参考及借鉴。     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

金沙江典型水库水温影响因素敏感性分析

在拱坝温度应力计算等领域,库水温是重要的边界条件,对其计算精度要求较高,尤其对于高拱坝上游库水温而言,需要进行详细研究。库水温的影响因素较多,如河道的类型、水库的来水流量、来水温度、气象条件等,如何合理考虑各项因素对库水温分布的影响,对于计算的精确度意义重大。利用横向平均的二维水动力模型来研究金沙江上向家坝、溪洛渡、白鹤滩、乌东德等4座水动力特征相似水库的水温时空动态分布,并以典型水库溪洛渡为例,对该水库的来水流量、来水温度和气象条件等因素进行敏感性分析。研究成果可为后续几座水库的水温计算分析提供参考。