Selective leaching of vanadium from V-Ti magnetite concentrates by pellet calcification roasting-H_2SO_4 leaching process

A novel method of pellet calcification roasting-H_2 SO_4 leaching was proposed to efficiently separate and extract vanadium(V) from vanadium-titanium(V-Ti) magnetite concentrates.The leaching rate of V is as high as 88.98%,while the leaching rate of impurity iron is only 1.79%.Moreover,the leached pellets can be used as raw materials for blast furnace ironmaking after secondary roasting.X-ray photoelectron spectroscopy(XPS) and scanning electron microscopy with energy dispersive X-ray spectrometry(SEMEDS) analyses showed that V~(3+) was oxidized to V~(5+) after roasting at 1200℃,and V~(5+) was then leached by H_2 SO_4.X-ray diffraction(XRD) analyses and single factor experiment revealed a minimal amount of dissolved Fe_2 O_3 during H_2 SO_4 leaching.Therefore,a high separation degree of V and iron(Fe) from V-Ti magnetite concentrate was achieved through H_2 SO_4 leaching.Compared with the traditional roastingleaching process,this process can achieve a high selectivity of V and Fe,and has excellent prospects for industrial production.     

碳质金矿中碳质物及其“劫金”机理研究进展

碳质金矿是重要的难处理金矿资源之一,碳质物“劫金”是金浸出率低下的主要原因。碳质物组分复杂,不同组分的碳质物的“劫金”能力和“劫金”行为存在差异,磨矿和浸出环节对碳质物的“劫金”能力也会产生影响,这些因素均能直接影响金的浸出率。通过系统总结碳质金矿中碳质物在组成特征、“劫金”机理及“劫金”能力的影响因素等方面的研究进展,对碳质物“劫金”机理现有研究工作的不足及未来研究方向进行了探讨,为碳质金矿碳质物劫金机理及预处理工艺的研究提供了重要参考。     

重金属强化含金矿石的氰化浸出

通过分析铊、铋、汞和铅等重金属强化金氰化溶解的电化学原理,对含金氧化物矿石和难浸硫化物金精矿进行了重金属强化浸金研究.结果表明:重金属对金氰化溶解的阳极过程有显著的强化作用,但在常规供氧条件下,金的溶解速率并未显著提高;只有同时采用阴极强化措施,才能使重金属起到显著提高金溶解速率的作用;对于含金氧化物矿石,单独采用重金属强化即可明显提高浸金速率,如果在过氧化氢助浸的基础上添加重金属,金的浸出速率会有更大幅度的提高;对硫化物金精矿而言,单独采用重金属无明显强化效果,只有在添加过氧化氢作为辅助氧化剂的基础上,重金属对金的浸出才能起到强化的作用,该体系中过氧化氢起到了强化阴极过程和氧化硫化物的双重作用.     

EFFECT OF FINE GRINDING ACTIVATION ON LEACHING BEHAVIOUR OF SCHEELITE CONCENTRATE

The influence of mechanical activation on the leaching behaviour of scheelite was studied bymeans of fine grinding in an attritor and subsequently HCl leaching in presence of PO_4~(3-).Results showed that after fine grinding in the attritor,the reaction rate of scheelitewith HCl-Na_3PO_4 solution was remarkably increased,the extraction of W increased fromabout 8 to 99%.The IR spectra and X-ray diffraction analysis indicated that in addition toan enlargement of surface area the fine grinding action had made also changes of fine struc-ture and reactivity of solid surface,hence the leaching process of scheelite can be carried outunder mild leaching conditions.     

Behavior of calcium silicate in leaching process

1　ＩＮＴＲＯＤＵＣＴＩＯＮＩｎｇｅｎｅｒａｌ ,ａｌｕｍｉｎａｃａｎ ｔｂｅｐｒｏｄｕｃｅｄｅｃｏｎｏｍｉｃａｌｌｙｂｙＢａｙｅｒｐｒｏｃｅｓｓｉｎＣｈｉｎａｂｅｃａｕｓｅｔｈｅｂａｕｘｉｔｅｃｈａｒａｃｔｅｒ ｉｚｅｓｉｎｄｉａｓｐｏｒｅａｎｄａｂｏｕｔ 80 %ｂａｕｘｉｔｅｅｘｉｓｔｉｎｌｏｗｄｅ ｇｒｅｅｏｆｔｈｅｍａｓｓｒａｔｉｏｏｆａｌｕｍｉｎａｔｏｓｉｌｉｃａ(Ａ/Ｓ)ｗｈｉｃｈｖａｒｉｅｓｆｒｏｍ 4ｔｏ 9[1] .Ａｎｄａｂｏｕｔ 4 0 %ｏｆａｌｕｍｉｎａｉｓｐｒｏ ｄｕｃｅｄｂｙｓｉｎｔｅｒｉｎｇ…     

Evaluation of high Ni-Cr-Mo alloys for the construction of sulfur dioxide scrubber plants

Corrosion in wet lime/limestone systems used for flue gas desulfurization in thermal power plants is of great concern. The frequent variations in acidity and in chloride and fluoride ion concentrations experienced by such systems pose a serious threat to the materials of construction. Currently used materials mostly type 316L stainless steel often fail to meet their life expectancy. The present study evaluates the performance of advanced Ni- Cr- Mo alloys 59 and C- 276 in a simulated sulfur dioxide scrubber environment. Accelerated tests showed that high Ni- Cr- Mo alloys have little tendency to leach metal ions such as chromium, nickel, and molybdenum at different impressed potentials. Scanning electron microscopy was used to examine the morphology of pitting attack.     

高浓度熟料溶出的工艺研究

优化烧结法生产 ,提高产量、节约能耗是氧化铝生产急需解决的问题之一。实现高浓度溶出可以提高精液浓度 ,减少湿法系统物料流量 ,达到提高产能、增加产量、降低成品成本的目的。本文通过对国内外高浓度熟料溶出发展情况和烧结法影响高浓度溶出的因素进行分析研究 ,提出了提高熟料A/S的必要性 ;指出了适合我国条件的熟料A/S大小和生料配方 ;分析了温度和αk 对溶出和分离的影响机理和规律 ;提出了适合高浓度溶出的溶出条件和浓度大小。对生产有一定的指导意义。     

Guayule seedling response to nitrogen fertilizers

Slow growth and high seedling mortality limit direct seeding establishment of guayule (Parthenium argentatum G.). This study was conducted to assess seedling growth enhancement by the addition of different rates and forms of N fertilizers and Ca salts. Experiments were conducted in a greenhouse with cultivar 593 under both surface and subirrigated conditions using water low in salts (salinity of 0.8 dSm^–1, SAR of 5.0 and 10 mg Ca L^–1). Under surface-irrigated conditions, seedling height and fresh plant weight increased with N application to the irrigation water to 70 mg L^–1. The best seedling growth was observed when (NH₄)₂SO₄ was added in combination with CaCl₂ or CaSO₄. Progressively less growth was observed by addition of (NH₄)₂SO₄ alone, CO(NH₂)₂ plus CaSO₄, CO(NH₂)₂ alone and Ca(NO₃)₂. When seedlings were subirrigated, however, the best growth was observed with Ca(NO₃)₂. Intermediate growth was obtained with (NH₄)₂SO₄ plus CaSO₄ and lowest growth rates with (NH₄)₂SO₄ alone. These differential responses may be explained by the differences in leaching and volatile characteristics of the N forms. Growth enhancement from N and Ca additions increased with time with significant increases 45 days after seeding. Nitrogen application with Ca may be effective amendment in promoting subsequent growth of direct seeded guayule.     

Characterization of nanoporous materials prepared from montmorillonite clay and its application to the decolorization of mare's milk oil

Nanoporous materials have been prepared by leaching the purified montmorillonite clay with sulfuric acid (H₂SO₄) solution with varying concentrations (0.5–2 M) at 80°C for 0.5–4 h. Acid leaching causes partial amorphisation of the clay with depletion of MgO, Al₂O₃, CaO and Fe₂O₃ components mostly from interlayer and octahedral sites. This increases the specific surface area by more than 3 times, i.e. from 49.1 to 157 m²/g. The pore-size distribution curves calculated from the adsorption isotherms of the leached montmorillonite show that most of the pores are in the mesoporous region with their diameter ranging 3–4 nm. This material turns out to be appropriate for bleaching of the mare's milk oil. The chemical and structural changes of the acid-leached montmorillonite are discussed in terms of the decolorization capacity.     

从煤矸石制取氯化铝联产橡胶填料的研究

在实验室小试、中试装置上进行了从煤矸石制取氯化铝联产橡胶填料的研究，考察了煤矸石性质、工艺条件等对产品质量的影响，结果发现最佳工艺参数为焙烧温度６００～ｑ００℃．焙烧时间为１５～９０ｍｉｎ．焙烧温度对产品质量影响更为显著，制得结晶氯化铝产品质量达到合格品标准，填料用作橡胶制品填充剂具有较好补强与抗曲性能，其胶片的物理机械性能达到普通橡胶板标准。