针对任意传感器失效的反馈设计新方法

本文针对任意传感器的失效，给出了一种反馈设计方法，通过解Ｌｙａｐｕｎｏｖ方程及判定一个不等式的成立，即可给出反馈增益阵的设计，最后用这种方法研究了一个例子。     

A sequential quadratic programming-based algorithm for optimization of gas networks

British Gas uses a complex, heavily looped network of pipes and controllable units (compressors and regulators) to transmit gas from coastal supply terminals to regional demand points. Computer algorithms are required for efficient management of the system. This paper describes an algorithm for optimal control over periods of up to a day. The problem is large scale and highly nonlinear in both objective function and constraints. The method is based on Sequential Quadratic Programming and takes account of the structure of the pipeflow equations by means of a reduced gradient technique which eliminates most of the variables from the quadratic subproblems. The latter involve only simple bound constraints, which are handled efficiently by a conjugate gradient-active set algorithm. Trust region techniques permit use of the exact Hessian, preserving sparsity. More general constraints are handled at an outer level by a truncated augmented Lagrangian method. Results are included for some realistic problems. The algorithm is generally applicable to problems with a control structure.     

分布式集中供热微机控制系统

由供热站控制装置、温度巡测仪和ＰＣ－３８６微机构成对供热站及热用户的多种现场参数进行采集与控制。文中提出了一种根据补水进行前馈控制的方法。并给出了远距离测温探头的实际应用线路。     

High-level synthesis design flow for power side-channel security

The lack of efficient security guidance is a prominent problem in the design flow of high-level synthesis. To tackle this issue, this paper proposes a security-based high-level synthesis design flow featuring the power side-channel vulnerabilities. The side-channel leakage is quantified by establishing a secure component module library, a more efficient and secure parallel scheduling mechanism is generated by optimizing the control flow, and a more secure architecture of the storage system is achieved by optimizing the data flow. The goal is to perform tradeoffs between performance and security, reducing the side-channel risks at the early stage of design and simultaneously generating more secure and efficient cryptographic cores in hardware. Furthermore, the proposed HLS design flow is verified on a field programmable gate array platform. Experimental results show that, in comparison with the traditional design flow, this method reduces the resources by 72% and the clock cycles by 70% and increases the throughput by 88%, and that it can lower the power side-channel risks within an ongoing design to the greatest extent.     

A variable rate multipulse speech coder for CDMA cellular systems

Variable Rate (VR) speech coders are classified into: source-controlled VR coders where the rate is selected depending on the local character of the speech, and network-controlled VR coders where an external control signal selects the coding rate. The first category benefits from the variable rate channels used by Code Division Multiple Access (CDMA) mobile communications. The second category is indispensable for the right behaviour of the CDMA systems under conditions as high traffic levels. The VR speech coder presented in this communication exhibits both types of control. The source control is achieved by means of a Voice Activity Detector (VAD) and a phonetic classifier. The network control acts on the selection procedure of the multipulse excitation sequence to the synthesis filter. This is the main advantage of our VR MultiPulse speech coder because by means of an external signal the bit rate can be changed only every 4 msec, without transitions or distortions. Considering one-way communication, six different operating rates can be externally selected ranging from 4.8 to 9.1 kbps for the active frames; an average bit rate of 380 bps is required for the noise frames.This work has been partly funded by the Spanish Research National Plan under grant no. TIC92-0800-C05-02 and by Northern Telecom.     

超薄带精密轧机辊形调节计算机控制

介绍一种超薄带精密轧机的计算机控制系统改造。超薄带精密轧机用于轧制０．０１ｍｍ～０．５ｍｍ的超薄带材，其辊形调节系统是影响带材板形的关键部分。原系统响应慢，可靠性差，难以满足精轧要求。现对该轧机进行改造，采用计算机，将ＰＣＭ（ＰｕｌｓｅｃｏｄｅＭｏｄｕｌａｔｉｏｎ－脉冲码调制）控制与二次型性能指标最优化控制相结合的控制方法用于轧机的的全面管理与控制，不仅大大提高系统精度与运行可靠性，而且实现调整与控制自动化。目前已投入正常运行。     

Human-centred appraoches to control and information technology: European experiences

In this paper, the concept of Human-Centred Technology will be described with regard to the different dimensions of workplace, groupwork and networks and in terms of the frameworks of both society and the natural environment. These different aspects of Human-Centred Systems will be illustrated by a series of case studies representing several European countries. The report covers a wide range of research fields. The emphasis is on technology: the roles of control and information technology in enterprises today — including issues of applying AI — and the strategies of designing and implementing technology taking into account the specific aspects which characterize human-centred systems.     

铁基气门导管材料性能的控制

介绍了在铁基气门导管的生产过程中,加强关键工序的质量管理,以确保产品材料性能的合格与稳定。     

A globally stable discrete-time controller for current-fed induction motors

In this short paper we present a discrete-time field oriented controller (FOC) for current-fed induction motors which insures global asymptotic speed regulation as well as rotor flux norm tracking. To the best of our knowledge, this is the first time such a result is rigorously established for a controller implemented in discrete-time. To insure global stability a condition on the reference for the rotor flux norm, which is time-varying, is imposed. This condition disappears as the sampling period goes to zero, hence allowing for independent speed regulation and rotor flux norm tracking. One important feature of our scheme is that, compared with the first-difference approximation of the classical indirect FOC, the additional computational burden is negligible. It is also shown that the result can easily be extended to the case of tracking time-varying references in speed or position.     

火箭弹道附近大气参数辨识系统的研究

研究了利用雷达实测数据对沿火箭飞行弹道的大气参数进行辨识和外推落点的方法，进而提出了一个对效力射诸元进行修正的方法。在此基础上，对软件系统进行了设计。最后通过仿真试验，分析了系统的准确性。