Ag/LaNixCo1-xO3触点材料的制备及电接触性能研究

本文运用溶胶-凝胶燃烧法合成了双钙钛矿型LaNixCo1-xO3(LNCO)纳米材料,利用粉末冶金和热挤压技术制备了相应的Ag/LNCO触点材料及元件样品。重点考察了不同Ni、Co含量对Ag/LNCO触点材料微观结构、物相组成、物理性能、力学性能及电寿命服役能力的影响,对其电弧侵蚀失效行为进行了研究,并与SnO2粉体增强Ag基触点材料进行对比。结果表明:溶胶凝胶法合成的LNCO纳米颗粒粒径为20-30 nm,经粉末冶金工艺制备的Ag/LaNi0.5Co0.5O3触点材料电学性能和电寿命都优于Ag/SnO2触点材料,其电阻率低至2.10 μΩ?cm,电寿命性能达到51287次。表明Ag/LaNi0.5Co0.5O3触点材料性能较佳,是一种可以取代Ag/CdO的新型触点材料。     

ZnCl2-assisted Synthesis of ZnSe Polycrystal

A chemical-assisted element direct-reaction method is developed to synthesize ZnSe compound semiconductor material at a relatively low temperature (～1000 C). ZnSe polycrystal was obtained in the closed-tube systems with Zn-Se, Zn-Se-Zn(NH3)2Cl2, Zn-Se-NH4Cl and Zn-Se-ZnCl2. The as-synthesized samples were tested by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and analyzed by thermodynamic numerical method. The results demonstrate that the synthesis efficiency is higher than 99.96% for Zn-Se-ZnCl2 system at around 1000 C for 3 weeks. It also exhibits that not only temperature, but also low apparent ratio of volume and surface area of the source materials and higher ZnCl2 content are required to achieve high synthesis efficiency. A SeCl transporting reaction synthesis process is proposed based on the thermodynamic analysis.     

Novel transparent and flexible nanocomposite film prepared from chrysotile nanofibres

In the present study, chrysotile nanofibres, obtained from physicochemical dispersion of natural chrysotile, were used to prepare nanofibre sheets by vacuum filtration. As-prepared sheets were then impregnated by UV-curable resin and cured by ultraviolet light to fabricate the flexible and transparent nanocomposite films. Observed from SEM, the transparent films showed a smooth surface and a typical sandwich structure in cross section, viz. nanofibre sheet filled with resin was sandwiched by two layers of resin. XRD patterns indicated the amorphous nature of cured resin and characteristic crystallographic structure of chrysotile in nanocomposite films. Though the nanofibre sheets were white in colour, and nanofibre contents in nanocomposites were as much as 43.4 wt%, the nanocomposite films displayed an excellent optical transparency with about 85% light transmittance in the visible light range. Tensile tests showed that the addition of nanofibres resulted in a great improvement in mechanical strength of the nanocomposite films; with the increase of nanofibre contents, the modulus and tensile strength of nanocomposite films increased gradually.     

MgO－CoO－NiO氧敏材料的缺陷化学及电导特性研究

本文用点缺陷理论分析了ＭｇＯ－ＣｏＯ－ＮｉＯ系氧敏材料的缺陷模型．并测量了ＭｇＯ－ＣｏＯ－ＮｉＯ材料的高温电导与氧分压的关系．在实验的基础上，研究了该材料的缺陷化学及电导特性，对其禁带宽度及缺陷的热力学参数进行了理论估算．实验结果与理论分析吻合得较好．     

多孔材料缓冲吸能特性表征方法

分析了多孔材料缓冲吸能机理，综述了多孔缓冲材料吸能特性的几种表征方法：缓冲曲线、缓冲系数、Janssen因子、Rusch曲线、能量吸收率曲线和能量吸收图，并分析了各种表征方法的优缺点。能量吸收图汇集了应变率和材料结构特征等信息，且能够模型化，对于不同密度多孔材料吸能特性的表征具有一定的普适性。     

复合包装材料剥离强度的检测方法

本文介绍了包装复合材料的分类、包装复合包装材料剥离强度的定义、检测方法及注意事项。     

低温切削技术及其应用研究

低温切削是指在低温环境下进行的切削过程,它利用低温下材料的物理化学性质,实现特定的加工目的。分析了低温切削技术的特点及其制冷技术,阐述了机械制造领域中低温切削技术的研究成果及应用状况。     

Modeling Self-Rollable Elastomeric Films for Building Bioinspired Hierarchical 3D Structures

In this work, an innovative model is proposed as a design tool to predict both the inner and outer radii in rolled structures based on polydimethylsiloxane bilayers. The model represents an improvement of Timoshenko’s formula taking into account the friction arising from contacts between layers arising from rolling by more than one turn, hence broadening its application field towards materials based on elastomeric bilayers capable of large deformations. The fabricated structures were also provided with surface topographical features that would make them potentially usable in different application scenarios, including cell/tissue engineering ones. The bilayer design parameters were varied, such as the initial strain (from 20 to 60%) and the bilayer thickness (from 373 to 93 µm). The model matched experimental data on the inner and outer radii nicely, especially when a high friction condition was implemented in the model, particularly reducing the error below 2% for the outer diameter while varying the strain. The model outperformed the current literature, where self-penetration is not excluded, and a single value of the radius of spontaneous rolling is used to describe multiple rolls. A complex 3D bioinspired hierarchical elastomeric microstructure made of seven spirals arranged like a hexagon inscribed in a circumference, similar to typical biological architectures (e.g., myofibrils within a sarcolemma), was also developed. In this case also, the model effectively predicted the spirals’ features (error smaller than 18%), opening interesting application scenarios in the modeling and fabrication of bioinspired materials.     

在线办公环境下教学保障物料管理信息系统的设计与应用

介绍了利用vs2003．net和oracle设计基于网络Web环境下的物料管理信息系统。通过这个系统将物料管理的工作流和业务流实现了有效整合,改变了传统的登记管理模式,为教学物料的在线管理提供了一种新的网络化模式。