高合金铁基烧结材料在轧钢导位中的应用研究

本文研究了高合金铁基烧结材料在轧钢导位中的应用。实验表明,通过粉末冶金液相烧结技术,可以获得具有优良综合性能的制品,材料密度ρ≥7.5 g/cm3,硬度≥55 HRC,抗弯强度≥1 000 MPa,冲击韧度αk≥3.9 J/cm2,满足了轧钢导位辊的工作要求。材料利用率可达95%以上、降低了制备成本。使用寿命是普通轧辊寿命的3~6倍,适用于线材和小型型材的轧钢生产。     

铸件浸渗系统脱液机故障树的建立和分析

利用FTA方法对脱液机的各种故障进行系统分析,建立了脱液机的故障树,并对故障树进行定性分析.找出了影响脱液机可靠性的主要因素,提出了提高脱液机可靠性的相应措施.     

Calculation of fatigue limits of case-hardened specimens with consideration of mean stresses and residual stresses

 The strength of case-hardened parts under cyclic loading can be determined in an experimental manner, but this can produce a large amount of costs due to the expenditure of material and testing time. Therefore, a calculation method is developed, that strongly reduces the number of experiments. The presented model is based on Weibull's weakest-link concept and allows to compute the survival probability of a case-hardened part which is loaded close to the fatigue limit. The essential quantities in this model are the distribution of Vicker's hardness of the material, the exponents of the Weibull distribution of the volume and the surface, the residual stress state, the surface roughness and the surface oxidation depth. By integrating the survival probabilities of the surface and the volume, the survival probability of the entire specimen or part can be calculated, which allows to compute the fatigue limit. The necessary parameters have to be determined from reference specimens. The model is successfully examined by comparing experimental and calculated results of smooth and notched case-hardened specimens under alternating torsion, rotating bending, repeated tension and tension-compression. Received 20 August 2001 / Accepted 11 November 2001     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

Liquid crystalline polymers as additives to enhance the device properties of low molecular mass liquid crystals

Magnetic and electric fields have been used to determine the splay (k₁₁) and bend (k₃₃) elastic constants in a series of polymer/monomer liquid crystal solutions using the well known Freedericksz transition technique. Measurements have been carried out as a function of concentration and temperature. The polymer used was a smectogenic polysiloxane side chain liquid crystal with both cyanobiphenyl and benzoate ester side groups. The monomeric solvent was the nematogen 4-n-pentyl-4′-cyanobiphenyl. All of the solutions studied were nematogenic up to a concentration of 40% w/w. It has been shown that k₁₁, k₃₃ and $\text{k}{}_{33}\text{k}{}_{11}$ all decrease with increasing polymer concentration and that at high enough concentrations $\text{k}{}_{33}\text{k}{}_{11}$ tends to become independent of temperature. The implications of these results are discussed in terms of the performance of the most common liquid crystal display, i.e. the twisted nematic device.     

利用液晶光阀实现的光学形态变换

提出了基于液晶光阀的光学二值图像领域处理器，利用它完成了扩、蚀和边缘检测等形态变换操作，并给出了实验结果。     

天然气制液态烃新工艺

丰富的天然气资源,特别是边远地区分散的中小天然气田和油气共生的油气田的天然气,由于产量达不到管线长输的规模效益,又远离消费市场,很难开发利用.为此,作者在天然气两段催化氧化制合成气和费-托合成研究的基础上,提出了一种流程较短、投资和操作费用较低的天然气合成液态烃新工艺,可将丰富的天然气资源,特别适合将边远地区分散的中小天然气田的天然气转化为无硫、无氮、无芳烃、无重金属污染和便于输运的优质石蜡基液态产品.该产品可经轻度加氢改质得到高品质的柴油掺合组分、润滑油基础油高等附加值产品.该工艺副产的燃料气可用于发电,或作为燃料气使用.     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响