A new iterative order reduction (IOR) method for eigensolutions of large structures

Order reduction is a computationally efficient method to estimate some lowest eigenvalues and the corresponding eigenvectors of large structural systems by reducing the order of the original model to a smaller one. But its accuracy is limited to a small range of frequencies that depends on the selection of the retained degrees of freedom. This paper proposes a new iterative order reduction (IOR) technique to obtain accurately the eigensolutions of large structural systems. The technique retains all the inertia terms associated with the removed degrees of freedom. This hence leads to the reduced mass matrix being in an iterated form and the reduced stiffness matrix constant. From these mass and stiffness matrices, the eigensolutions of the reduced system can be obtained iteratively. On convergence the reduced system reproduces the eigensolutions of the original structure. A proof of the convergence property is also presented. Applications of the method to a practical GARTEUR structure as well as a plate have demonstrated that the proposed method is comparable to the commonly used Subspace Iteration method in terms of numerical accuracy. Moreover, it has been found that the proposed method is computationally more efficient than the Subspace Iteration method. Copyright © 2003 John Wiley & Sons, Ltd.     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

HACCP在保健食品西洋参口服液生产中的应用

保健食品行业GMP的实施有利HACCP的应用推广。本文应用HACCP于传统保健食品西洋参口服液生产过程中，将生产及加工过程中危害因素降最低限度，以确保产品的质量与安全。     

Solving the small sample size problem in face recognition using generalized discriminant analysis

The goal of face recognition is to distinguish persons via their facial images. Each person's images form a cluster, and a new image is recognized by assigning it to the correct cluster. Since the images are very high-dimensional, it is necessary to reduce their dimension. Linear discriminant analysis (LDA) has been shown to be effective at dimension reduction while preserving the cluster structure of the data. It is classically defined as an optimization problem involving covariance matrices that represent the scatter within and between clusters. The requirement that one of these matrices be nonsingular restricts its application to datasets in which the dimension of the data does not exceed the sample size. For face recognition, however, the dimension typically exceeds the number of images in the database, resulting in what is referred to as the small sample size problem. Recently, the applicability of LDA has been extended by using the generalized singular value decomposition (GSVD) to circumvent the nonsingularity requirement, thus making LDA directly applicable to face recognition data. Our experiments confirm that LDA/GSVD solves the small sample size problem very effectively as compared with other current methods.     

一种新型智能光纤传感器的研制与应用

光纤传感技术是一种新型的传感技术，目前已受到国内外广泛重视而得到高速发展。光纤液位变送器具有高精度、高可靠性，不受电磁干扰等优点，特别是在防爆要求非常高的油气集输领域，它的无电检测、光信号传输完全消除了不安全的因素，为易燃易爆场所提供了安全可靠的检测仪器。     

Progress in the development of polymer cholesteric liquid crystal flakes for display applications

Polymer cholesteric liquid crystal (PCLC) flake technology is being developed as an alternative display technology for flexible, reflective particle displays. The motion of PCLC flakes suspended in a host fluid can be controlled with an electric field, creating a way to electrically control the flakes' ability to brightly reflect light that is circularly polarized. The PCLC flake/host fluid dispersion has been successfully microencapsulated both in a polymer matrix and in gelatin micro-capsules. Microencapsulation will not only expand the applications scope of the technology, but also may aid in addressing some potential problem areas that are inherent to many forms of particle display technology. A second important development in PCLC flake technology involves the manufacture of shaped flakes based on soft lithography techniques. The size and shape of a flake impact its reorientation, and uniformly shaped flakes respond in a similar manner. The unique reflective properties of PCLC flakes also provide possible applications in areas such as optics and photonics, switchable ‘smart windows’ or conformal coatings, and information displays such as ‘electronic paper.’     

High training set size reduction by space partitioning and prototype abstraction

Instance-based learning methods like the nearest neighbour classifier generally suffer from the indiscriminate storage of all training instances, resulting in large memory requirements and slow execution speed. In this paper, new training set size reduction methods based on prototype generation and space partitioning are proposed. Experimental results show that the new algorithms achieve a very high reduction rate with still an important classification accuracy.     

钛精矿回转窑直接还原过程结圈可能性的探讨

通过煤种，入窑球冷态强度和还原过程强度，以及钛精矿与煤灰混合物的软化温度等分析探讨了钛精矿预热球团回转窑直接还原产生结圈的可能性，获得了可以避免结圈的结论。     

基于光敏自组装多层膜的液晶光控取向膜

采用layer-by-layer(LBL)的方法，将基板依次在具有光敏双键的季铵盐水溶液和聚乙烯基苯磺酸钠水溶液中浸泡，石英基板表面形成了自组装多层沉积膜。经线性偏振紫外光辐照后，LBL多层膜表现出明显的紫外吸收各向异性。将两片带有各向异性薄膜的基板做成平行液晶器件。在正交的偏光显微镜下观察，发现取得均一、稳定的取向效果。该种光控取向膜有望用作LCoS微显示的取向层。