正交法在PTA生产中粒径控制上的应用

介绍了正交试验法在PTA生产中粒径控制上的应用。对第一、二结晶器采用L9( 34)正交表进行试验 ,选出最优操作方案为第一结晶器液位为 2 6 %、压力为 3 6 0 0kPa ,第二结晶器液位为 45 .5 % ,压力为 2 40 0kPa ,结果是 :平均粒径从原来的 ( 118± 10 ) μm控制到 ( 118± 8) μm左右 ,粒径小于 45 μm的从原来的 2 0 %下降到 15 %左右 ,粒径 2 5 0 μm以下的由 93 %上升到95 %左右     

一次低烧SrTiO3基晶界层电容器的研究

研究了以Ｌｉ２ＣＯ３为助烧结剂、Ｓｒ（Ｌｉ１／４Ｎｂ３／４）Ｏ３为施主掺杂剂、Ｂｉ２Ｏ３和ＳｉＯ２为晶界绝缘剂的ＳｒＴｉＯ３基晶界层电容器的一次低温烧成技术。初步探索了Ｔｉ／Ｓｒ比值、施主掺杂剂、绝缘剂对显微结构及介电性能的影响。在１１５０℃烧成温度下，获得了εａｐｐ〉３．５×１０＾４；ｐ〉１．０×１０＾１１Ω·ｃｍ；ｔｇδ〈１．０％；ΔＣ／Ｃ〈±５．０％（－２５￣＋８５℃）的ＳｒＴｉＯ３基晶界层     

Effect of Twin-Plane Reentrant Edge on the Coarsening Behavior of Barium Titanate Grains

When BaTiO₃ ceramics were sintered at relatively low temperatures (≤1250°C), the grains with reentrant edges caused by a (111) double twin grew exclusively. As a result, a microstructure with a bimodal grain-size distribution composed of platelike large grains and fine matrix grains was obtained. In contrast, at the usual sintering temperature between 1250° and 1350°C, grains containing a (111) double twin did not exhibit any growth advantage. In this case, a coarse and uniform microstructure was obtained. When this coarse-grained specimen was further heat-treated at 1365°C, the grains possessing a double twin were observed to grow exclusively again. The results were explained in terms of a coarsening process controlled by two-dimensional nucleation.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

纳米复相陶瓷材料的烧结技术

纳米复相陶瓷的烧结与普通陶瓷的烧结不同，在纳米复相陶瓷的烧结过程中需要采取相应的措施尽可能地控制晶粒的长大。目前，国内外研究者主要是通过改进传统烧结技术或采用新型烧结技术烧结制备纳米复相陶瓷。文章综述了目前国内外用的比较多的几种制备纳米复相陶瓷的烧结技术，并对其特点和应用情况进行了总结。     

堆场疏浚泥颗粒分选特性初步量化方法

为了准确评估堆场存储能力和合理选择疏浚泥处理工艺,以泥沙运动学为理论基础,将疏浚泥颗粒分为d0.005 mm、0.005 mm≤d≤0.01 mm和d0.01 mm 3个粒组,分析了各粒组相对含量的沿程变化规律,明确了堆场疏浚泥分选的主要原因是d0.01 mm粒组与0.005 mm≤d≤0.01 mm粒组的相对运动;以分选系数量化堆场疏浚泥分选的显著程度,以偏离系数量化原泥颗粒组成对堆场疏浚泥分选的影响,分析了分选系数、偏离系数分布与堆场疏浚泥土性分布的关系,提出了堆场疏浚泥分选特性的初步量化方法。研究结果表明:随着离吹填口距离的增大,分选系数沿程减小,呈幂函数分布,堆场疏浚泥分选性沿程减弱,吹填口附近分选系数最大,颗粒分选显著,粒度差异大,退水口附近分选系数趋近于零,分选不明显,颗粒分布均匀;偏离系数沿程先减小后增大,呈勺形分布,反映堆场前、后段疏浚泥土性与原泥相差较大,而堆场中段疏浚泥土性与原泥接近;分选系数、偏离系数的沿程分布与堆场疏浚泥土性分区具有良好的相关性。     

Nd2O3掺杂BaTiO3陶瓷的结构和电性能研究

研究了组份为Ｂａ１－ｘＮｄｘＴｉＯ３（ｘ＝０．００２－０．０４）陶瓷的结构和电性能，实验结果表明：当０．００２≤ｘ≤０．００４时，轻度Ｎｄ２Ｏ３掺杂的ＢａＴｉＯ３陶瓷呈半导体；而当０．０１２≤ｘ≤０．０４时呈绝缘性。ＢａＴｉＯ３陶瓷的室温电阻率ρｖ随Ｎｄ＾３＋含量的变化呈Ｕ型特曲线。组份为Ｂａ０．９９７０Ｎｄ０．００３０ＴｉＯ３的材料具有最低的ρｖ和最佳的ＰＴＣＲ效应，相应于最大的平均晶粒尺寸和最     

An easy pot incubation method for measuring nitrogen mineralization from easily decomposable organic material under well defined conditions

A pot incubation method for measuring mineralization dynamics from fresh plant material was tested. The aim was to develop a method which under well-defined conditions could produce mineralization data suited for estimating model input parameters for nitrogen prediction models. The results showed that the water tension of the soil could be controlled easily and precisely by diffusion through porous ceramic cups, and that nitrogen mineralization or immobilization could be measured already after 15 days at 15°C. The results showed that for the incubated catch crop residues carbon, nitrogen and nitrate-N contents were the most important factors determining mineralization. No significant effects ould be ascribed to other parameters measured.     

海河流域典型河流沉积物粒度特征及分布规律

为了解海河流域典型河流沉积物粒度参数空间分布规律,对海河典型河流的表层沉积物进行采集并利用Mstersize2000激光粒度仪进行粒度分析。结果表明,海河典型河流沉积物平均粒径差异显著,分选状况总体较差;山区水系与平原水系相比,沉积物平均粒径减小,呈集中分布,水动力减弱;山区自北向南变化明显,水系沉积物平均粒径减小,分布集中化,分选状况变差,由极正偏-正偏,向对称方向变化,峰度向平坦方向趋近,水动力减弱,符合粒径自然变化规律;平原区水系沉积物粒径参数表明南北变化不明显,因受较多支流、河流-湖泊-洼淀湿地等复杂系统和人为干扰强烈的影响,南北无显著变化规律。总的来说,海河流域河流受人为干扰强度较大,河流沉积物源较为复杂,栖息地物理完整性差。