多目标水平井水平段三维设计数学模型

用柱面法推导出多目标水平井水平段三维设计数学模型，并给出了三维设计所需井斜方位角及井斜角的简单计算公式。该数学模型具有一般性，可以方便地编制成计算机程序，对于多目标水平井水平段的优化设计和所有水平井入靶前的随钻修正设计都非常适用。     

大庆油田深层岩石力学特性参数的试验研究

通过对岩石可钻性、硬度、抗压强度等参数的测量 ,对大庆油田深井不同深度、不同层位、不同岩性的具有广泛代表性的岩心进行试验。并通过线性回归分析 ,建立了适用性较广的钻井岩石力学特性参数预测模型 ,为深井钻头选型提供了依据。     

河流地貌特征多样性的保护

河流作为一个有机的生态整体与生物多样性共存,构成了一种相互耦合的生态系统.河流丰富的地貌形态为流域生物多样性创造了很好的条件,是生物群落多样性的基础.现代水利工程应该克服对河流形态的多样化重视不足和忽略生态环境的缺陷,在治河过程中,尊重河流流域的自然状况,尊重各类生物的生存权利;认识并遵循河流地貌演变的客观规律,逐步完善河流生态工程建设措施;保护河流地貌形态特征多样性,为生物的生长、繁殖、栖息提供条件,达到保护河流生态系统多样性,维持河流系统健康的目的.     

Pulsed laser deposition of indium antimonide

Single crystalline oriented films of indium antimonide have been grown on cadmium telluride substrates by the pulsed laser deposition technique. The films were (111) oriented which is the substrate orientation. The composition of the grown films were found to deviate from that of the target owing to loss of antimony during evaporation. This deviation from stoichiometry led to film-substrate reaction, resulting in mixed interface. The antimony deficiency in the films were controlled by correcting the stoichiometry, which led to avoiding mixed interfaces. The stoichiometric films showed good surface morphology and well defined sharp interfaces. The IR transmission spectrum showed sharp band to band absorption and effective detection in the MWIR. Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995     

Film morphology and reaction rate for the CVD of tungsten by the WF6—SiH4 reaction

Journal of Electronic Materials - Low pressure chemical vapor deposition (LPCVD) of tungsten (W) by SiH4 reduction of WF6 on Si(100) surfaces was studied in a single-wafer, cold-wall reactor over a...     

在高速气流粉碎作用下PVC的力化学降解及形态变化的研究

通过ＧＰＴ、ＦＴ－ＩＲ、ＳＥＭ和力学性能测试，研究了在高速气流作用下聚氯乙烯（ＰＶＣ）的力化学降解反应、颗粒形态和微晶结构变化及其对ＰＶＣ物理、力学性能的影响。实验结果表明，经过高速气流处理ＰＶＣ，分子量将有所降低，晶体结构发生变化，颗粒尺寸和表观密度降低，比表面积增大，加工性能和力学性能得到明显改善。     

填充HDPE复合材料基体结晶形态的控制因素

本文以HDPE/玻璃微珠和HDPE/CaCO₃体系为研究模型,通过扫描电镜、红外光谱、偏光显微、小角激光散射和材料力学性能实验等方法考察了这两种体系的界面粘结性、填料含量、粒径及试样成型冷却速率等与其材料性能及基体结晶形态变化间的关系。实验结果表明;在复合材料试样成型过程中,因基体树脂冷却收缩而产生的界面应力可干扰基体中球晶的生长环境,应变诱导填料颗粒周围基体树脂的结晶,促使其表面伸展链晶体结构的形成,并由此而明显改变了复合材料的耐热性;复合材料的界面粘结性是产生这种应变诱导作用,并控制异相结晶的关键。     

Mathematical modeling and optimization of intratumor drug transport

A pseudohyperbolic problem of optimal control of intratumoral drug distribution is formulated. It takes into account the heterogeneity of tumor tissues and effects of convection diffusion in a fissured porous medium. A mathematical model constructed and the corresponding optimal control problem are shown to be correct. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 6, pp. 147–154, November–December 2007.     

利用数学模型分析复吹转炉吹炼工艺

在冶金热力学和动力学及反应工程学原理的基础上，建立了模拟复吹转炉冶炼过程的数学模型．在用梅钢150t复吹转炉工业试验的结果对模型加以验证之后，利用模型对具有中高磷铁水特点的梅钢转炉吹炼工艺进行了分析讨论．