Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

中国古代陶瓷饮水杯盏形态演变的因素

在人类生存、发展的历史进程中,作为饮水用具的陶瓷杯盏经历了从无到有、由简单到复杂、由粗糙到精致的嬗变过程,而这一过程在很大程度上受到陶瓷生产技术、人们的饮水方式及审美情趣的变化等因素的影响。     

循环冷却水零排污运行方案的研究

对循环冷却水系统零排污的技术可行性、经济性等进行了讨论，并针对大庆炼化公司循环冷却水系统零排污方案的实施加以详细描述，对实施过程中存在的问题予以了详细说明。     

Groundwater as a source and pathway for road salt contamination of surface water in the Lake Ontario Basin: A review

In Ontario, there is limited comprehensive research regarding the contribution of chloride in groundwater to surface water systems. The delivery of chloride via groundwater can contribute to the degradation of the Great Lakes and their tributaries. Thus, this review intends to fill or identify knowledge gaps regarding assessing groundwater as a potential source of road salt, the single largest use of salt in urban cold region environments, contamination to surface water by synthesizing existing groundwater chloride research in the Lake Ontario Basin. Knowledge regarding source characterization, properties, pathways, and impacts of chloride in the environment is essential to evaluate the contribution of chloride via groundwater. Past groundwater chloride research in the basin is primarily concentrated in highly urbanized areas and has identified localized trends of increasing groundwater chloride concentrations in these regions; however, few investigations have been conducted in varying land uses (e.g., rural or less urbanized watersheds) or at sufficient temporal and/or spatial scales. Significant chloride accumulation is occurring in watersheds and aquifers within the basin. Concentrations are expected to increase until equilibrium is obtained, thus resulting in sustained yearlong elevated concentrations in tributaries. Recently, chloride loading to Lake Ontario has increased significantly, with groundwater inputs having the potential to support long-term increases in chloride concentrations in the lake. However, few studies have evaluated the explicit contribution via groundwater to Lake Ontario, and therefore a knowledge gap continues to exist. We provide a synthesis of additional research priorities to better understand the magnitude of groundwater chloride issues in the basin.     

变化环境下“中华水塔”水资源及产流规律变化分析研究

受全球气候变暖的影响,“中华水塔”地区正面临着以“变暖变湿”为主的气候变化。受气候及下垫面条件的综合影响,区域水资源显著增加,各流域产流机理在空间上呈现出明显的地区差异特征。基于“中华水塔”区域1956—2020年水文气象资料,通过趋势、突变、距平等分析方法,分析其水文要素和产流规律的变化趋势、特征及相互之间影响关系。结果表明：近年来“中华水塔”区域气温显著升高,蒸发能力总体增强,区域进入丰水期,降水、径流显著增加,在同等降水径流尺度下,黄河源区产流能力有所降低,长江、澜沧江源区产流能力明显增强;气温升高、降水量持续偏丰以及流域前期影响雨量（蓄水量）增加、枯季径流比例提高、下垫面生态持水能力增强是引起区域产流规律变化、水资源量增加的主要原因。     

考虑土体强度参数深度依赖性的非平稳随机场边坡滑动深度和体积分析

基于随机有限元方法（RFEM）和Monte-Carlo模拟,建立了能够模拟具有深度依赖性的土体强度参数边坡或具有软弱夹层边坡的非平稳随机场模型。通过辐射扫描方法获取最危险滑动面,得到非平稳随机场边坡滑动深度和滑动体积。将该方法与均质边坡和平稳随机场边坡获得的滑动深度和滑动体积进行对比,研究土体强度参数深度依赖性的非平稳随机场边坡的不同坡度和各向异性对滑动深度和滑动体积的影响。结果表明：基于RFEM的非平稳随机场滑动深度和滑动体积结果为地质灾害风险及后果评估提供了一个参考分析的新角度;参数的深度依赖性程度越高(变化率b越大),则边坡平均滑动深度和滑动体积越小;在大坡度滑坡风险后果评估中,可以基于均质边坡分析结果进行初步预估;在非平稳随机场中,随着各向异性的增大,所有坡度边坡的滑动体积变异系数增大;不同坡度下,水平方向的相关程度越大,则土坡内软弱夹层的不确定性越强,滑动体积的变异系数也不断增大。     

火电厂节水技术探讨

火力发电厂是耗水大户，随着水资源的日渐匮乏及环保法律的日趋严格，合理利用水资源，提高水的重复利用率，已成为火电厂面临的紧迫任务。在对厦门嵩屿电厂节水工作进行介绍的基础上，提出火电厂可采用的节水管理措施与技术改进措施，可为其他电厂的节水工作及水务管理工作提供借鉴。     

Assessment of Bitumen Re c overy from the Athabasca Oil Sands Using a Laboratory Denver Flotation Cell

A methodology was developed in this study to evaluate the effect of operating parameters on the processability of oil sands using small‐scale laboratory experimental devices. By subtracting bitumen recovered to the froth by entrainment with water, the concept of “true flotation recovery” is proposed to describe bitumen recovery resulting from bitumenbubble attachment. The experimental results indicated that “true flotation recovery” is a more sensitive and meaningful marker than overall bitumen recovery to evaluate the processability of oil sands using small‐scale laboratory test units.     

单组分聚氨酯乳液制备及其结构与性能研究

采用预聚合法,以聚酯二元醇(PEA)、甲苯二异氰酸酯(TDI)、二羟甲基丙酸(DMPA)为基本原料合成了分子链上带有亲水基团(-COOH)的聚氯酯预聚体。以特殊的水化方式制得聚酯型水性聚氨酯乳液。讨论了温度、-NCO-与-OH的物质的量之比(R)、亲水基团含量、合成工艺分别对材料力学性能、耐水性、玻璃化转变温度(Tg)等的影响。研究发现,采用前中和工艺、在高速搅拦下将预聚物加入到水中的水化方式,当R值为1．2,羧基含量为1．6％时,合成的聚酯型水性聚氨酯乳液具有较好的贮存稳定性,且涂膜的耐水性和力学性能良好。     

基于加权的无人机集群组网分簇算法

在无人机集群组网中,节点的高速移动会造成网络拓扑结构更新频繁,使网络管理变得更加复杂。分簇能够增大网络容量,实现空间资源的复用,是优化网络管理的有效手段之一。针对大规模、高速移动的环境进行了研究,提出了一种多参数加权分簇算法。该算法将最大速度相似度分簇算法中的分簇指标引入到加权分簇算法中,并且对链路保持率、节点度差、节点剩余能量进行改进,综合考虑这四种参数,通过加权组合的方式选举具有最大权重的网络节点作为簇头。仿真结果表明,该分簇算法不仅能够减少簇的数量和簇间切换率,提高分簇的稳定性,而且能够延长最小节点生存时间,改善网络的整体续航能力。