An investigation of water-gas transport processes in the gas-diffusion-layer of a PEM fuel cell by a multiphase multiple-relaxation-time lattice Boltzmann model

In order to study water-gas transport processes in the gas-diffusion-layer (GDL) of a proton exchange membrane (PEM) fuel cell system, a multiphase, multiple-relaxation-time lattice Boltzmann model is presented in this work. The model is based on the mean-field diffuse interface theory and can handle the multiphase flows with large density ratios and various viscosities. By using the standard bounce back boundary condition and an approximate average scheme for the non-slip and wetting boundary walls, respectively, detailed liquid-gas transportation in the GDL, in which exact boundary condition is difficult to be implemented, can be simulated. Unlike most of lattice Boltzmann methods based on the Bhatnagar–Gross–Krook collision operator, the present model shows a viscosity-independent velocity field, which is very important in simulating multiphase flows where various viscosities coexist. We validate our model by simulating a static droplet on a wetting wall and compare with theoretical predictions. Then, we simulate a water-gas flow in the GDL of a PEM fuel cell and investigate the saturation-dependent transport properties under different conditions. The results are shown to be qualitatively consistent with the previous numerical and theoretical works.     

Coalgebra morphisms subsume open maps

We relate two abstract notions of bisimulation, induced by open maps and by coalgebra morphisms, respectively. We show that open maps correspond to coalgebra morphisms for a suitable chosen endofunctor in a category of many sorted sets. This demonstrates that the notion of open-maps bisimilarity is of essentially coalgebraic nature. A central role in our development is played by a category of presheaves, which we show as corresponding to the subcategory of consistent coalgebras with lax cohomomorphisms.     

热轧高强钢平整机辊径参数设计技术研究

基于高强钢平整机的生产工艺特点,结合板形与辊耗问题,将带材的出口前张力与辊间压力横向分布都均匀作为目标函数,把保证所有被平整高强钢产品的机械性能满足产品大纲要求作为约束条件,提出了一套针对热轧高强钢平整机的工作辊与支承辊辊径参数设计模型.其研究结果对指导宝钢分公司1880 mm热轧平整机的工艺参数的确定与技术谈判发挥了重要作用,并具有进一步的推广价值.     

Supercritical gases pasteurization of apple juice

Supercritical CO₂ and N₂O pasteurization of apple juice, inoculated with Saccharomyces cerevisiae as test microorganism, was performed at 36 °C on a laboratory multi-batch apparatus of a total volume of 150 ml. The pressure values ranged from 100 to 200 bar. Experimental results indicate the effectiveness of the method proposed. A stochastic model of the process was developed on the basis of the experimental evidence: high-pressure inactivation curves were analysed using a stochastic model based on multi-hit model. Furthermore, the samples of the cells subjected to high-pressure treatments were examined by environmental scanning electron microscopy (ESEM) to determine the effect of the process on the cell wall.     

Perceived risk for influenza in veterans with spinal cord injuries and disorders.

Objective: Guided by the extended parallel process model (EPPM), the objective was to assess control processes dominant in influenza behavior decisions. Design: Cross-sectional survey. Results: Response rate was 31% (n=968). Regarding influenza risk, 59% were in danger control. Those in fear control were more likely to report influenza infection (p=.000). In the nonvaccinated, those in fear control were more likely to indicate not knowing where to get the vaccine (p=.016) and that it was unavailable (p=.027), and those in danger control believed they did not need it (p=.023). Zero critical values were more likely to indicate that no health provider recommended the shot (p=.002). Conclusions: Most perceived efficacy to be stronger than threat related to influenza; according to the EPPM, they are aware of their risk but recognize their ability to avert it. For those in danger control, messages should focus on increasing perceptions of severity and susceptibility to positively affect behavior change. For those in fear control, messages should focus on efficacy only. With a critical value of zero, no threat is induced, and a high-threat/high-efficacy approach should be taken. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

输气干线单个分输站站址最优化研究

输气干线分输站站址规划设计合理与否，直接影响到分输站至各城市门站之间输气管线总投资和未来管网系统的发展。为此,着重讨论并建立了以分输站站址、各城市门站与分输站之间管道直径、壁厚、分输站压力为设计变量，以各城市门站与分输站之间管道投资最小为目标函数的分输站站址优化数学模型。根据模型特点，采用混合离散变量复合形法与数据库技术相结合来求解分输站站址。以此站址为参考点，结合现场勘察，在参考点附近沿输气干线预选多个分输站站址，并对影响分输站建设和管理的环境因素用多目标模糊评价方法进行综合评价，以评价效果好的站址为最优分输站站址。用算例说明了分输站站址优化结果不仅与工艺参数变化有关，且与分输站所处环境因素有关。提出还应深入研究输气干线中具有多个分输站的站址优化问题。     

A frame-based knowledge representation model and its mapping to nested relations

The first part of this paper introduces the basic constructs of a frame representation model and gives a formal definition for them. Subsequently the nested relational model (NF²) is described as an extension of the classical relational model to support relation-valued attributes. In the second part of this paper both models are compared with each other and a mapping of frame representation structures to NF² structures is specified. The structural similarities between frames and NF² relations are made clear and it is shown that their main difference is due to the type polymorphism introduced by the concept hierarchy of the frame model. This causes type collisions to occur in the strictly typed NF² model when frames are directly mapped to NF² structures. Two solutions to this problem are suggested and compared. The paper concludes with a reformulation of query operations of the frame model in terms of NF² algebra operations.     

A dynamic linear programming approach to market allocation of renewable resources in the italian energy system: The case of solar thermal and biogas technologies

In Italy solar thermal energy and energy from biogas are two possible means of reducing dependence on energy imports. Using a multiperiod LP model (MARKAL) the authors assessed the likely potential of both technologies under various circumstances. The study covered the period 1980–2005, in five segments of five years. It focused only on the subsystem of the energy end-uses which can be substituted for by solar thermal and biogas technologies. The overall non-renewable sources which can be saved in 20 years by these technologies total 450 PJ (1 PJ = 10^{1 5} J) if the fuel prices rise at 0 per cent average annual, 1450 PJ if the fuel prices rise at 4.2 per cent average annual, 1860 PJ if the fuel prices rise at 7.2 per cent average annual and 3780 PJ if the fuel prices rise at 15 per cent average annual. However the most competitive technologies appear to be solar water heaters used mainly in the private and commercial sectors and biogas systems used mainly in the agricultural sector. The study was carried out by APRE under ENEA (formerly CNEN) contract and was intended to serve as an analytical basis for establishing an overall development and demonstration strategy for end-use renewable technologies in Italy.