Studies on chitin 3—effect of coagulants and annealing on the preparation and the properties of chitin membrane

Chitin membrane was prepared by casting a N,N-dimethyl acetamide, N-methyl 2-pyrrolidone and lithium chloride (DMA-NMP-LiCl)solution of chitin and coagulating with several media. The effect of the coagulants on membrane formation was studied. 2-Propanol was found to be more favourable than methanol, ethanol, acetone and mixtures of 2-propanol and water. The membrane obtained in 2-propanol was subjected to annealing. Annealing made the membrane dense and strong. The tensile strength of the membrane annealed at 145°C for 2hr was about twice that of an unannealed membrane. The solute permeability of the annealed membranes was lower than that of the original one. These phenomena could be clearly interpreted in terms of crystallinity.     

燃料电池质子交换膜的研究进展

本文从质子交换膜的发展入手 ,指出全氟磺酸型质子交换膜是目前最适合燃料电池的膜材料 ,并对其结构特点及优缺点进行了重点分析 ,论述了目前质子交换膜的发展趋势     

非洲爪蟾卵提取物中200nm膜泡与环形片层及核被膜上核孔复合体形成的关系

将ＬａｍｂｄａＤＮＡ引入活化的非洲爪蟾卵提取物中，在由磷酸肌酸与磷酸肌酸激酶构成的ＡＴＰ再生系统的参与下，在这种非细胞体系中能够围绕由ＬａｍｂｄａＤＮＡ诱导形成的染色质重建核被膜结构，同时在染色质外出现类似核被膜结构的环形片层。在这两种膜结构中核孔复合体的形成都与直径２００ｎｍ左右的单层圆形小膜泡密切相关，这些小膜泡可以附着在染色质表面或独立于染色质之外相互融合成扁平囊状的双层膜片层，双层膜进一步融合形成核孔，与此同时，核孔复合体在核孔上完成装配。     

膜萃取器设计及应用研究进展

简要阐述了膜萃取的特点和基本类型;重点介绍了轴对称、纤维、片状等３种膜器的设计原理、特征以及膜过程设计．总结了膜萃取技术在金属离子分离、旋光化合物的分离、发酵萃取、医药萃取等方面的应用现状和最新进展;展望了膜萃取技术的发展趋势。     

用直接实验设计方法优化PAN/PSF合金膜的制备条件

在大量单因素实验结果的基础上 ,以直接实验设计方法来设计制膜条件和用SAS软件包对所得实验数据进行优化并建立数学模型 ,得到优化的制膜条件。由该条件所制得的PAN/PSF合金膜的纯水通量提高 1 7倍 ,平均孔径扩大了 1 8倍。     

工业化陶瓷超滤膜的表征

以液-液排除法测定工业化陶瓷超滤膜的孔径及孔径分布，比较了两种渗透体系对测定结果的影响；用已知分子量标准物质考察了不同膜的截留行为，获得了各膜的切割分子量值，并分析了截留率与孔径的对应关系，为工业化陶瓷膜的开发提供依据。     

Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

An SS1-SS2 {beta}-barrel structure for the voltage-activated potassium channel

To examine the feasibility of a ß structure for thepore-lining region of the voltage-gated potassium channel, wehave characterized a family of 12 antiparallel ß-barrels.Each is comprised of four identical pairs of ß-strandsorganized with approximate 4-fold symmetry about a channel axis.The Cand N-termini of the ß-strand pairs are assumedto be at the extracellular end of the channel, and each pairis connected by a hairpin turn at the intracellular end of thechannel. The models differ in the residues located in the hairpinturn and in the orientation of the two strands of each pairin the barrel, i.e. whether the C-terminus of a pair is clockwise(CW) or counterclockwise (CCW) from the N-terminus when thechannel is viewed from outside the cell. Following known structureprecedents and potential energy predictions, the barrel is assumedto be right-twisting in all cases. All models have crowded layersof inward-projecting aromatic sidechains near the center ofthe channel which could regulate channel selectivity. The modelswith an odd number of amino acids in the hairpin turn have theadvantage of predicting that F433 points into the barrel, butthe disadvantage that V438 does not. Of these models, two ofthe models are most consistent with the external tetraethylanunonhim(TEA) block data, and of those, one (T439 CCW 3:5) is most consistentwith the internal TEA block data.     

醋酸纤维素—纤维素增强膜的结构特征和分离性能

本文描述了醋酸纤维素－纤维素大孔增强超滤膜的结构特征一分离性能之间的关系。详细论述了膜材料含量和粘连剂含量及其分子量对膜结构和性能的影响。论述了不同配方铸膜液的膜，其孔径，水通量和截留率随操作压力的变化规律。实验证明这种高强度的ＣＡＣ膜经多次重复使用后，其结构性能保持完好。     

聚乙烯醇膜的阻醇及导电性能(Ⅱ)戊二醛交联聚乙烯醇膜

为提高直接甲醇燃料电池(DMFC)用膜的阻醇性能，采用在渗透蒸发领域广泛使用且具有良好分离效果的聚乙烯醇(PVA)为主要材料，制备了戊二醛(GA)交联PVA膜，考察了此类膜的阻醇及质子导电能力。PVA(GA)膜的阻醇效果较目前在DMFC中广泛使用的Nation膜有显著提高，但其自身不具有质子导电能力，需外加电解质溶液以提高其电导率。