A global cutter positioning method for multi-axis machining of sculptured surfaces

Traditional cutter positioning methods have defects of global errors and incomplete optimization. Because of using local differential geometry and focusing on the cutting contact point, these defects cannot be avoided and will deteriorate accuracy in precision machining. The authors presented the conception of actual cutting edge of a toroidal mill which was extended from cutting contact point, and pointed out its importance in programming. Instantaneous cutter position error (ICPE) was also investigated. A new global method based on the ICPE curve was presented. Taking the relationship between surface and cutter into consideration thoroughly, this global method shows many advantages which have been verified by simulation and cutting tests.     

Thermal error measurement and modelling in machine tools.: Part I. Influence of varying operating conditions

Thermal error in machine tools has been observed to be closely linked to the temperature of critical elements of the machine. It was found, in the experiments conducted herein, that there was a significant increase in the axis positioning error on account of an increase in the temperature of the machine elements due to continuous operation. However, it was also observed that the specific operating parameters of the test cycles carried out also significantly affected the positioning error. Different sets of operating parameters generated significantly different error values even though the temperature of the machine elements generated by those operating conditions was similar. As such, this observation forms a very important consideration in the development of a generic thermal error compensation system. It appears to indicate that such a system needs to be capable of evaluating the compensation depending upon the temperature values of the machine elements as well as account for the effect that different operating parameters induce upon the positioning error under the same thermal condition of the machine. This paper attempts to analyse the thermal behaviour of a three-axis vertical machining centre under the influence of various operating parameters and, through the experimental results obtained, point out and explain the effect of these parameters on the axis positioning error. This behaviour forms the basis of an improved modelling methodology that is presented separately in Part II of this paper.     

A new high accuracy method for two-dimensional biharmonic equation with nonlinear third derivative terms: application to Navier–Stokes equations of motion

In this paper, we propose a new compact fourth-order accurate method for solving the two-dimensional fourth-order elliptic boundary value problem with third-order nonlinear derivative terms. We use only 9-point single computational cell in the scheme. The proposed method is then employed to solve Navier–Stokes equations of motion in terms of streamfunction–velocity formulation, and the lid-driven square cavity problem. We describe the derivation of the method in details and also discuss how our streamfunction–velocity formulation is able to handle boundary conditions in terms of normal derivatives. Numerical results show that the proposed method enables us to obtain oscillation-free high accuracy solution.     

基于FPGA的高速时间交替采样系统

提出了一种高速高精度数据采集系统的设计。ADC高速采样基于时间交替采样结构实现,以FPGA为逻辑控制芯片,DSP为误差矫正算法处理中心。在对系统总体设计各模块进行介绍的基础上,重点分析了系统存在的偏移误差、时延误差和增益误差,并描述了一种误差矫正方法。通过实验测试,结果表明该设计能够实现1 GS/s的高速采样,并能完成明显的误差矫正。     

MIMO-OFDM系统的低阶信道估计的改进

在慢衰落信道条件下,MMSE估计有较好的估计性能但复杂度较高。为了降低信道估计的运算复杂度,分析并总结了原有的MMSE信道估计算法以及其改进算法,提出一个基于MIMO-OFDM系统的OLR-MMSE信道估计算法。OLR-MMSE估计是结合了MMSE算法的低秩近似以及SVD分解,大大降低了大矩阵的阶数,有效地降低运算复杂度并可以保持良好的估计性能。通过计算机模拟仿真验证了提出的信道估计可以达到系统性能和复杂度之间较好的权衡。     

基于逻辑回归模型的木片和树皮的图像识别

为了提高木片生物能的利用率,需要除去木片中的树皮杂质。识别木片和树皮的图像对于实现二者分离具有重要作用。提出一种基于逻辑回归模型来对木片和树皮进行图像识别的算法。算法流程包括计算各种可以描述木片和树皮纹理的参数,利用SAS统计分析出最佳参数,将最佳参数计算所得的样本数据用于SAS LOGISTIC过程得到预测方程,再将预测方程用于逻辑回归模型来实现木片和树皮的图像识别。通过实验可知,最佳参数为灰度方差,该图像识别算法的正确率能达到97.4%。     

基于GPU的元胞自动机熔岩流动模拟

为解决基于元胞自动机进行熔岩流动模拟的计算效率问题,提出一种应用在元胞自动机上的GPU并行计算方法。将元胞自动机中每一个方形网格映射到GPU的一个逻辑计算单元上,通过并行计算,提高模拟的效率,解决传统串行计算方法的不足,使模拟达到实时性。模拟结果表明,在元胞自动机的物理模型理论基础上,用GPU并行计算进行加速,在模拟效果和时间效率上均取得了良好的效果。     

基于平方位置误差下限的优化功率分配方案

在无线传感网络中,节点定位是基于位置的应用基本要求。然而,现多数文献仅关注定位精度,而忽略了能量消耗对定位精度的影响。为此,针对基于接收信号强度RSSI(Received Signal Strength Indicator)定位方案,提出基于平方位置误差下限SPEB(Squared Position Error Bound)的优化功率分配SPEB-OPA(SPEB-Based Optimal Power Allocation)方案,目的在于最小化能量消耗。在SPEB-OPA算法中,将SPEB作为评定定位精度的参数,并推导出SPEB表达式,然后建立优化功率分配的目标函数,并考虑到锚节点位置存在误差。仿真结果表明,提出的SPEB-OPA方案极大地减少了功率消耗。当误差门限T=8时,SPEB-OPA方案的功率消耗比统一功率分配UPA(Uniform Power allocation)方案减少至50%。     

基于RGB-D数据的目标分割与实时重建方法

应用RGB-D传感器进行三维重建具有速度和成本的优势,并可获取纹理信息,但扫描数据易受干扰。针对有干扰的外部环境,提出一种基于RGB-D数据的目标分割与重建方法。首先为改善输入图像质量,采用多帧叠加的中值滤波对信息缺失的位置进行预处理。接着,利用静态减除和动态3D Mean-shift相结合的方法分割目标,实现对目标物体的实时定位。最后使用一种优化的点到面ICP方法进行配准,并在此基础上利用随机抽样算法对点云的配准进行加速。采用该方法实现的原型系统能够支持含有背景和一定干扰下的小物体配准,且能有效提高三维重建的速度和自动化程度。