外循环型鼓泡式反应器气含率及循环液速率

对直径２８０ｍｍ、扩大直径５００ｍｍ、外循环管直径６５ｍｍ、总高２９００ｍｍ的外循环型鼓泡式反应器，在气体空塔线速Ｕｇ为０．０４－０．５５ｍ／ｓ时，用静压差法和脉冲示踪法测定了不同部位的气含率Ｅｇ，Ｅｐｇ和循环液速率ｕ１，并获得了它们的关联式：对反应段，Ｅｇ＝０．４５５６Ｕ＾０．３１９８ｇ〔Ｕｇ／（Ｕｇ＋Ｕ１）〕＾０．７３９６；对反应器扩大段，Ｅｕｇ＝０．９３８９Ｕ＾０．４４３１ｕｇ；对循环管，Ｅ     

Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

基于Patel-Teja状态方程的统一粘度模型(Ⅱ)应用于油气藏流体粘度的预测

基于(I)报根据pVT和Tμp图形的相似性和Patel-Teja状态方程建立的预测纯流体气、液相粘度的统一模型,通过引入常规的状态方程参数的混合规则,将其应用于二元轻烃混合物共计1894个数据点及模拟天然气高压粘度的预测,平均相对误差分别为13.78%和16.75%;应用于油藏原油和天然气高压粘度的预测,结果优于现有的有关油气藏流体粘度模型.     

落脚河水电站引水发电系统的调节保证计算分析

水轮发电机组在运行中遇到启动、正常停机、增减负荷、事故甩负荷等工况变化时，经常会引起引水发电系统的水力过渡过程，所以在设计中必须通过调节保证计算以选择合适的导叶调节规律及其调节时间，从而优化压力引水系统的运行工况，使水电站的水工建筑物布置既经济合理又安全可靠。     

球头碗球面加工组合机床设计

根据球面形成原理,利用铣刀和工件的两个圆运动,合成球头碗的不完整内球面。采用组合机床,结构简单,调整、维护方便,主轴弹性卡头便于工件装卸。对零件尺寸、形状和位置误差进行了分析。通过对铣刀和主轴电机的变频调速,找出最佳切削参数,实现了内球面的高效率高精度加工。     

EDT机床监控系统的研究开发

介绍可编程控制器FX2N－80MR在EDT机床逻辑控制系统中的应用，详细介绍了EDT机床监控系统的构成，功能及其实现方法。     

束流测量中的工频陷波器

提出了一种应用于电子束曝光机束流测量中的自动跟踪工频陷波器，给出电路结构，基于对其工作原理的分析，介绍了提高陷波器跟踪精度的设计要点及调试方法。     

PLC在MK9-MAKS卷烟机组国产化电气改造中的应用

本文介绍了PLC（ProgrammableLogicController)在MK9卷烟机国产化改造中的应用，并提出了最大限度的用软件取代原机硬件电路提高可靠性的一种方法。